2. Crestron
  3. ST-CBL

Crestron ST-CBL User manual

  • Hello! I am an AI chatbot trained to assist you with the Crestron ST-CBL User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CRESTRON ST-CBL Programming Cable
Crestron Electronics, Inc.
101 Broadway, PO Box 394
Cresskill, NJ 07626
Tel: 888.CRESTRON / 201.894.0660
Fax: 201.894.1192 / BBS: 201.894.1317
http://www.crestron.com
Specifications subject to
change without notice.
Doc. 5680
03.97
DESCRIPTION:
The ST-CBL is CRESTRON's programming cable that enables communication between the Series ST-
1500 Touchpanel and the CRESNET II remote control system. The programming cable is six feet in length.
One end of the ST-CBL has a RA, 3.5 mm stereo connector that inserts into right side of the touchpanel
(when viewing the touchscreen). The other end of the ST-CBL has a four-position female connector that
inserts into the control system port labeled NET. Refer to the illustration below for proper connection.
NOTE
The ST-CBL only needs to be connected when loading a program.
NET
G
Y
Z
24
CNRACK OR
CNRACK-D
OR CNMS
SERIES ST-1500
TOUCHPANEL
ST-CBL
/