Crestron ST-CBL User manual

CRESTRON ST-CBL Programming Cable

Crestron Electronics, Inc.

101 Broadway, PO Box 394

Cresskill, NJ 07626

Tel: 888.CRESTRON / 201.894.0660

Fax: 201.894.1192 / BBS: 201.894.1317

http://www.crestron.com

Specifications subject to

change without notice.

Doc. 5680

03.97

DESCRIPTION:

The ST-CBL is CRESTRON's programming cable that enables communication between the Series ST-

1500 Touchpanel and the CRESNET II remote control system. The programming cable is six feet in length.

One end of the ST-CBL has a RA, 3.5 mm stereo connector that inserts into right side of the touchpanel

(when viewing the touchscreen). The other end of the ST-CBL has a four-position female connector that

inserts into the control system port labeled NET. Refer to the illustration below for proper connection.

NOTE

The ST-CBL only needs to be connected when loading a program.

NET

CNRACK OR

CNRACK-D

OR CNMS

SERIES ST-1500

TOUCHPANEL

ST-CBL