ZTE-RACER

ZTE ZTE-RACER, Racer User manual

  • Hello! I am an AI chatbot trained to assist you with the ZTE ZTE-RACER User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
RACER
Quick Start Guide
Product Safety Information
Do not use hand-held
while driving
Do not use while
re-fuelling
For body-worn operation
maintain a separation of
15 mm
This device may produce
a bright or flashing light
Small parts may cause a
choking hazard
Do not dispose of it in a
fire
This device may produce
a loud sound
Avoid contact with
magnetic media
Keep away from
pacemakers and other
personal medical
devices
Avoid Extreme
Temperatures
Switch off when
instructed in hospitals
and medical facilities
Avoid any contact with
liquid, keep it dry
Switch off when
instructed in aircrafts
and airports
Do not attempt to
disassemble
Switch off in explosive
environments
Only use approved
accessories
Do not rely on this device for emergency communications
Getting to Know Your Phone
Before Getting Started
Removing the Back Cover
Installing the SIM Card
Installing the Battery
Charging the Battery
The new battery is not fully charged. Charge it after you use
up the remaining power.
1. Connect the small end of the adapter to the phone’s
charger jack.
2. Connect the adapter to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
Powering on/off Your Phone
Make sure the SIM is in your device and the battery is
charged before powering on.
Hold Power Key to switch on your phone.
To switch it off, hold Power Key to get the phone
options. Select Power off, and then tap OK.
Switching to Sleep Mode
To save battery power, sleep mode suspends your device
to a low-power-consumption state while the display is off.
Your device also goes into sleep mode automatically when
the display is automatically turned off after a certain period
of time, which you can set in Screen timeout of the display
settings.
Press Power Key to switch to sleep mode.
Waking up from Sleep Mode
1. Press Power Key to activate your screen display.
2. Drag the
icon to the right.
Notes:
If you have set an ‘unlock pattern’, a PIN or password for
your phone, you’ll need to draw the pattern or enter the
PIN/password to unlock your screen.
079584503094
Installing the Memory Card
Micro-USB/
Charger Jack
Power Key
Press to power
on the phone,
switch it to Sleep
Mode, or wake
it up.
Hold to get the
phone options
Menu Key
Tap to get
the options
for the
current
screen.
Back Key
Tap to go
to the
previous
screen.
Home Key
Tap to return
to Home Screen.
Hold to see
recently-used apps.
Dial Key
Press to open Dialer
or answer a call.
End Key
Press to end a call.
Hold to get the phone
options (the same as
holding Power Key).
Volume
Key (Up)
Volume
Key (Down)
2 3
4 5 6
Headset Jack
Earpiece
Touchscreen
/