Jolly 1452 User manual

Category
Remote controls
Type
User manual

This manual is also suitable for

SCART port
For SKY receivers: SKY function
On/Off
Mute/Unmute audio
INFO
Channels 0 through 9
Display EPG guide
Previous channel Function
Menu up/left/right/down
Ok/Enter
Volume control
Scan programs sequentially
Exit menu
Menu selection
DISC menu
Favourite channels list
To switch from analog to digital
For mySKY receivers: My function
Timer/Sleep
Activate, deactivate the quick access menu
For SKY receivers: Interattivi function
To return to the previous program
For SKY receivers: Boxoffice function
Televideo
EPG Function/ T.OPT Function
Subtitles
For SKY receivers: Service function
Image Format
Block televideo page
For SKY receivers: Help function
Televideo/fastext function buttons red/green/yellow/blue
Shift function button
Activate keypad's
secondary functions
SHIFT
VOL
EXIT
BACK
HOME
MENU’
DISC MENU’
ANALOG
DIGITAL
INFO
SLEEP
OPTION
Q.VIEW
TEXT
EPG
T.OPT
SUB-T
ARC/SFI
RATIO
1..0
GUIDE
P P
av
HOLD
HELP
MY
INTERATTIVI
PRIMAFILA
SERVICE
FAV
SKY
P
SETTING OF VOLUME ADJUSTMENT
(Default Volume TV)
Select the position to be used to
replace the volume function of another
device (TV, Pay Tv); the LED will blink
briefly.
Press the two keys + MUTE and
hold them down until the LED stays on
steadily. Release the keys. FIG. 3
Push key 6, followed by the position
from which the volume control is to be
used (1 for TV, 2 for Pay Tv, 0 for
CANCEL); the LED will blink twice to
confirm that a choice has been made.
Press VOL+ or VOL-. The LED
corresponding to the position from
which the volume is to be used (TV; Pay
Tv) will go on.
FOR EXAMPLE: in order to be able to
adjust the volume of the television while
using the satellite receiver function:
1. push the Pay Tv key;
2. push both the + MUTE keys;
3. push the 6 key;
4. push the 1 key.
Push VOL+ or VOL-, and the TV LED will
blink.
PAY
TV
Auto Program
Turn on your device.
Press the appropriate button for the device you
wish to work on ( o ); the LED will flash
briefly.
Keep holding both buttons and until the LED
stays lit; release the buttons. FIG.3
Press the 0 button followed by the type of device
selected (1 for TV, 4 for Pay TV), the LED will flash
every 3 seconds approximately. FIG.5
When the device turns off press any button on the
keypad; the LED will flash twice as confirmation.
Check that everything is working properly, if all
functions are not present, repeat
the Auto Program process.
Find the brand of your set in
www.jollyline.it/cf.html
Ищите модель вашего устройства
www.jollyline.it/cf.html
Pay Tv
01451LJL20100928
GBS Elettronica
via U. Comandini, 35 - 00173 Roma - Italy
tel. +39.06.7236734 fax +39.06.7233098
www.jollyline.it
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Jolly 1452 User manual

Category
Remote controls
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI