Ryobi RP4206 User manual
- Category
- Camera accessories
- Type
- User manual
This manual is also suitable for
Su lente de inspección con telescopio ha sido diseñada y fabricado
de conformidad con nuestras estrictas normas para brindar fiabilidad,
facilidad de uso y seguridad para el operador. Con el debido cuidado,
le brindará muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
Tek4® INSPECTION SCOPE
MICROSCOPE D’INSPECTION Tek4®
LENTE DE INSPECCIÓN CON
TELESCOPIO DE Tek4
®
RP4205
Cette microscope d’inspection a été conçue et fabriquée
conformément à nos strictes normes de fiabilité, simplicité d’emploi
et sécurité d’utilisation. Correctement entretenue, elle vous donnera
des années de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your inspection scope has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
180
2 — English
Introduction ..................................................................................................................................................................... 2
Warranty .......................................................................................................................................................................... 2
Important Safety Instructions .......................................................................................................................................... 3
Symbols ........................................................................................................................................................................... 4
Features ........................................................................................................................................................................... 5
Assembly ......................................................................................................................................................................... 5
Operation ......................................................................................................................................................................... 6
Maintenance .................................................................................................................................................................... 7
Figure Numbers (Illustrations) .......................................................................................................................................8-9
Parts Ordering / Service .................................................................................................................................... Back Page
TABLE OF CONTENTS
INTRODUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
WARRANTY
LIMITED TWO YEAR WARRANTY AND 30 DAY EXCHANGE POLICY
30-DAY EXCHANGE POLICY: During the first 30 days after date of purchasing this product, you may either request service
under this warranty or you may exchange it by returning it with proof of purchase and all original equipment packaged with
the original product to the dealer from which it was purchased. The replacement product will be covered by the limited
warranty for the balance of the two year period from the date of the original purchase.
LIMITED TWO YEAR WARRANTY. This product is warranted against all defects in workmanship or materials for a period
of two years from the date of purchase. The warranty on any accessories for this product, excluding batteries, is limited to
90 days from the date the accessory is purchased. To obtain warranty service, call Customer Service at 1-800-525-2579
for warranty return instructions. The product must be properly packaged and returned with all equipment that was included
with the original product. When you request warranty service, you must also present proof of purchase documentation,
which includes the date of purchase (for example, a receipt or a bill of sale). Defective products returned within the
warranty period will be repaired or replaced, at our option, free of charge, within ninety (90) days or less. The cost of
shipping the product to us is your responsibility. This warranty only covers defects arising under normal usage and does
not cover any malfunction, failure or defects resulting from misuse, abuse, neglect, alteration, modification or unauthorized
repairs. It applies only to the original purchaser at retail, and may not be transferred. One World Technologies, Inc. makes
no warranties, representations or promises as to the quality or performance of this product other than those specifically
stated in this warranty. Any implied warranties granted under state law, including warranties of merchantability or fitness for
a particular purpose, are limited to two years from the date of purchase. One World Technologies, Inc. is not responsible
for direct, indirect, or incidental damages. Some states do not allow limitations on how long an implied warranty lasts, or
the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply
to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
3 — English
WARNING -
Read all instructions. To reduce the risk of injury,
user must read instruction manual. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
SAVE THESE INSTRUCTIONS
Know your tool. Read operator’s manual carefully.
Learn its applications and limitations, as well as the
specific potential hazards related to this product.
Following this rule will reduce the risk of electric shock,
fire, or serious injury.
Do not operate battery products in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Battery products create sparks
which may ignite the dust or fumes.
Use battery only with charger listed.
MODEL BATTERY PACK CHARGER
RP4205 AP4001 AP4700, AP4500,
AP4800
Do not disassemble the tool. Contact with internal parts
may increase the risk of electric shock or cause damage
to the product.
Do not use this tool for diving or any other prolonged
underwater use.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
product in unexpected situations.
Do not store the tool in an area of high heat or
humidity. Do not expose the tool to extended high
heat from the sun (such as on a vehicle dashboard.)
Damage to the product or the battery pack can result.
Use the product in accordance with these instructions
and in the manner intended for the product, taking
into account the environmental conditions and the
work to be performed. Use of the product for operations
different from those intended could result in a hazardous
situation.
Ensure the product is in the off position before
inserting battery pack. Inserting the battery pack
into battery products that have the switch on invites
accidents.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use this product only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
When servicing the product, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
This product should not be used without the battery
cap installed.
Do not place battery products or their batteries near
fire or heat. This will reduce the risk of explosion and
possibly injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
Do not charge the product in a damp or wet location.
Following this rule will reduce the risk of electric shock.
For best results, your battery product should be
charged in a location where the temperature is more
than 50°F but less than 94°F. To reduce the risk of serious
personal injury, do not store outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean
water for at least 10 minutes, then seek immediate
medical attention. Following this rule will reduce the risk
of serious personal injury.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this product.
If you loan someone this product, loan them these
instructions also.
IMPORTANT SAFETY INSTRUCTIONS
4 — English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Li - Ion
Recycle Symbols
This product uses lithium-ion (Li-ion) batteries. Local, state or
federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
SYMBOL NAME
DESIGNATION/EXPLANATION
The following signal words and meanings are intended to explain the levels of risk associated with this product.
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SYMBOL SIGNAL MEANING
This device complies
with Part 15 of the FCC
Rules. Operation is
subject to the following
two conditions: (1) This
device may not cause
harmful interference,
and (2) this device must
accept any interfer-
ence received, includ-
ing interference that
may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
NOTE: The user is cautioned that any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
RYOBI
RP4205
5 — English
FEATURES
PRODUCT SPECIFICATIONS
Power ........................................... 4V rechargeable battery
Operation Environment ................Temperature 23º- 104 Fº
Storage Temperature .................... Temperature -4º- 140 Fº
Camera Resolution ........................................... 300K pixels
Digital Zoom ....................................................................2X
LCD Screen Resolution ............................ 320 x 240 pixels
LCD Screen Size ....................................................... 2.7 in.
KNOW YOUR INSPECTION SCOPE
See Figure 1, page 8.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTO POWER OFF
The inspection scope will automatically shut off when it has
been unused for five minutes.
BATTERY / CHARGE INDICATOR
The indicator in the left corner of the screen indicates when
the 4V battery pack is running low on charge.
CAMERA CABLE
When the camera on the end of the cable is pointed at an
object, the image is shown on the 2.7 in. high-resolution
LCD screen.
CAMERA LED
The inspection scope has a built-in light. This LED feature
is convenient when working in close or tight areas where
additional light is needed.
DIGITAL ZOOM
Go from a normal 1X view to 2X by pushing the digital zoom
button.
ROTATE BUTTON
With a press of the Rotate Button, the image can be flipped
180°.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Inspection Scope
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
6 — English
OPERATION
WARNING:
Always remove battery pack from the product when you
are assembling parts, making adjustments, cleaning, or
when not in use.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
WATERPROOF FEATURE
Only the camera and camera cable are waterproof. All other
components of the scope are water-resistant and should
never be submerged.
Do not use this product for diving or any other prolonged
underwater use. If the camera is exposed to rain or immersed
in water, wipe it dry as soon as possible.
NOTE: Moisture or condensation does not indicate a mal-
function of the waterproof feature.
Changes in temperature (such as moving the camera from
a cold place into a warm place) may cause condensation in
the form of water droplets on the lens or the inside of the
camera. This is normal for all cameras. If this happens, turn
the camera off and remove the battery cap and battery. Place
it in a cool, dry area and leave the battery cap open. Wait at
least an hour before you turn it on again.
TO INSTALL / REMOVE BATTERY PACK
See Figure 2, page 9.
To install the battery pack:
Unscrew the battery cap.
NOTE: Do not remove the gasket inside the cap.
Insert the battery pack in the direction shown. Make sure
the raised rib on the battery pack aligns with the groove
in the inspection scope.
Place the cap over the battery pack and push until
the cap meets the threads at the end of the battery
compartment.
Screw the cap on securely.
To remove the battery pack:
Power the inspection scope off. Unscrew the cap. The
battery pack will disconnect and be easy to remove.
Do not attempt to use this product if the battery cap is
not securely closed.
POWER BUTTON
See Figure 3, page 9.
When the inspection scope is turned on and the camera is
pointed at an object, the LCD screen will show the image
the lens is pointing at.
To turn on:
Press and hold the power button.
Release the power button when the screen turns on.
To turn off:
Press and hold the power button.
Release the power button when the screen turns off.
NOTE: The scope with shut off automatically if unused for
five minutes.
ROTATE BUTTON
See Figure 4, page 9.
The image on the LCD screen can be rotated 180º by pushing
the rotate button. Push the rotate button a second time to
rotate it back 180º to its original position.
DIGITAL ZOOM
See Figure 5, page 9.
The screen view can be zoomed to 2X the normal view. Every
time the digital zoom button is pushed, the view will enlarge
1/3 at a time up to 2x zoom. The zoom icon is shown in the
upper right corner of the screen.
Press the zoom icon to zoom in on the selected view.
Continue pressing the zoom icon to zoom closer and
finally back to 1X.
LED BRIGHTNESS BUTTON
See Figure 6, page 9.
The LED has three levels of brightness and a fourth level
which turns the brightness off. Each time the LED brightness
button is pushed, the brightness level changes. The LED icon
is shown in the lower right corner of the screen.
7 — English
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 during maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
STORAGE
Storage in a cool, dry location will prevent condensation or
mold from forming inside the camera.
Before storing, always remove the battery pack from the
battery compartment.
Do not store the inspection scope at temperatures greater
than 122º F (such as on a dashboard or vehicle interior).
BATTERY PACK PREPARATION FOR
RECYCLING
WARNING:
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
_______________________
RP4205
OPERATOR’S MANUAL / Tek4® INSECTION SCOPE
MANUEL D’UTILISATION / MICROSCOPE D’INSPECTION Tek4®
MANUAL DEL OPERADOR /
LENTE DE INSPECCIÓN CON
TELESCOPIO
DE Tek4®
RP4205
ONE WORLD TECHNOLOGIES, INC.
É
www.ryobitools.com
®
®
®
_________________________
_________________________
RP4205
RP4205
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Ryobi RP4206 User manual
- Category
- Camera accessories
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Ryobi RP4206 Manuel utilisateur
- español: Ryobi RP4206 Manual de usuario