NEC
Express5800
/
120Rg-1
The NEC Express5800/120Rg-1 supports up to two Quad-
Core Intel
®
Xeon
®
5300 series processors* or up to two
Dual-Core Intel
®
Xeon
®
5100 series processors. Powered by
the multi-core Intel
®
Xeon
®
processors that enable data-
intensive processing, the 120Rg-1 delivers improved
application performance within the same physical space.
*2.5-inch SAS disk mode only.
Delivering up to 48GB (4GB x12) of memory capacity, the
120Rg-1 employs DDR2-667 Fully-Buffered DIMM memory
with ECC, Chipkill
TM
, mirroring, and on-line sparing
capabilities.
To provide high-performance internal storage, the 120Rg-1
supports hot-swap 3.5-inch and 2.5-inch Serial Attached SCSI
(SAS) disk drives, with maximum capacities of 900GB (300GB
x3) and 879GB (146.5GB x6) respectively. The 120Rg-1 is also
available with hot-swap Serial ATA2 disk drives, with up to
2.25TB (750GB x3). Both the SAS and the SATA2 models allow
RAID 0 and 1 as standard and RAID 5 as option.
Along with one 64bit/100MHz PCI-X slot, the 120Rg-1 supports
one PCI EXPRESS
TM
x8 slot as standard. By installing an
optional riser card, you can replace the 64bit/100MHz PCI-X
slot with a PCI EXPRESS
TM
x8 slot.
To ensure continuous system operation, redundant hot-swap
power supplies are supported as option on the SAS models.
Redundant fans are supported as standard on both the SAS
and the SATA2 models (not hot-swappable).
To enhance RAS (Reliability, Availability and Serviceability)
functionality, the 120Rg-1 comes standard with the
EXPRESSSCOPE Engine. This feature allows the user to
monitor the status of a managed server and operate its KVM
(Keyboard, Video, and Mouse) devices from a remote console
via LAN.
Bundled for easy system management, NEC ESMPRO
monitors and controls system operation from the remote
console, and assists the administrator in troubleshooting the
system. For simple system installation, NEC EXPRESSBUILDER
is attached as an installation support tool.
Product Highlights
www.necam.com/servers
■
Provides small to medium businesses
with outstanding performance, reliability
and availability while offering advanced
cost performance in a 1U rack form factor
■
Supports Multi-Core Intel
®
Xeon
®
processors for powerful processing
■
EXPRESSSCOPE Engine provides
enhanced RAS functionality while
optimizing your management cost
NEC
Express5800
/
120Rg-1
Hardware Specification
www.necam.com/servers
•
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
•
Intel and Intel Xeon are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
•
Linux is a trademark of Linus Torvalds.
•
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
•
All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders.
•
Specifications are subject to change without notice.
Cat.No. E07BSD
NEC
EXPRESS5800
For further information, please contact:
External Interface
Dimensions (mm)
Weight
Support OS
*4
Power Supply
Cooling Fan
Total: 2 slots
Full Height:
Standard : 64bit/100MHz PCI-X :1
Option
*6
: PCI EXPRESS
TM
(x8) :1
Low Profile
Standard : PCI EXPRESS
TM
(x8) :1
Display x1, Keyboard / Mouse x1
*7
USB2.0 x4, Serial x2
LAN x2, Management LAN x1
425W x 718D x 43H
*8
, 1U rack
SATA2 : 16kg (standard), 19kg (max)
SAS 3.5": 16kg (standard), 21kg (max)
SAS 2.5": 16kg (standard), 20kg (max)
Windows Server™ 2003,
Standard Edition
*9 *10
/ Enterprise Edition
*10
Windows Server™ 2003 R2,
Standard Edition
*9
/ Enterprise Edition
Windows Server™ 2003 R2,
Standard x64 Edition / Enterprise
x
64 Edition
Red Hat
®
Linux™
*11
SATA2 and 3.5" SAS models : 670VA/660W
2.5" SAS model : 740VA/730W
SATA2 model: 1, Not redundant
SAS models :
Standard : Not redundant
Option :
Up to 2, redundant, hot-swap
Standard: Redundant
Expansion Slots
Graphics
Maximum
Power Consumption
Server Management Controller
integrated (2MB)
Option: ATI ES1000 (16MB)
Quad-Core Intel
®
Xeon
®
Processor
*1
X5355
(2.66GHz/1333MHz FSB/2x4MB L2 Cache)
E5345
(2.33GHz/1333MHz FSB/2x4MB L2 Cache)
Dual-Core Intel
®
Xeon
®
Processor
5160
(3GHz/1333MHz FSB/4MB L2 Cache)
5130
(2GHz/1333MHz FSB/4MB L2 Cache)
5110
(1.60GHz/1066MHz FSB/4MB L2 Cache)
Supported
Intel
®
5000P
1-2
2GB (1GB x2)
48GB (4GB x12)
(when standard DIMMs are removed.)
CD-RW/DVD combo drive
*5
1000BASE-T x2
(100BASE-TX and 10BASE-T are supported.)
Intel
®
64
Chipset
CPU
No. of CPU
ODD
Network
Standard
Max
Max
I/F
Memory
Internal
HDD
DDR2-667 FB-DIMM
ECC, Chipkill, mirroring, on-line sparing
SATA2 / SAS
Supported
SATA2 : 2.25TB (750GB x3)
SAS : 3.5" 900GB (300GB x3)
2.5" 879GB (146.5GB x6)
SATA2 / SAS : on-board RAID 0, 1
RAID 5 (option)
*3 *4
Hot-Plug
RAID
*2
*1
2.5" SAS model only. No quad-core processor is available for SATA2 and 3.5"
SAS disk drive models.
*2
Contact your local NEC sales company for RAID configurations on Linux.
*3
SATA2 RAID 5 requires an optional Disk Array Controller (SATA2) [N8103-103].
*4
SAS RAID 5 requires an optional Disk Array Controller (SAS) [N8103-91, -99, or -105]
.
*5
Writing software is not provided for this combo drive.
*6
Replace the standard Riser Card with an optional Riser Card [N8116-09].
*7
Use a Y-cable provided with the system.
*8
The front bezel and protruding objects are not included.
When included: 485W x 823D x 43H
*9
Supports up to 4GB memory.
*10
SP1 or later.
*11
Go to "NEC Express5800 on Linux" at:
http://www.nec.co.jp/express/linux/index.html
1[0] (One bay is occupied by the DVD-ROM.)
SATA2 and 3.5" SAS models : 3[3]
2.5" SAS model : 6[6]
Device Bays [Free]
Disk Drive Bays [Free]
/