Yearlink EXP39 User manual

Category
IP phones
Type
User manual
Yealink SIP IP Phones V51 Firmware Change Log
1/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
Yealink SIP IP Phones Version51 Change Log
1 Introduction
1. Firmware Version: V51
2. Product Name: SIP-T28/T26/T22/T20/T12
3. Release Date: July 30, 2010,
2 New Features
1. Added Broadsoft DND&FWD synchronization.
2. Added Broadsoft network conference support.
3. Added Broadsoft redundant server (DNS-SRV) support.
4. Added LDAP function. (T28/T26/T22/T12)
5. Supported EXP39. (T28/T26)
6. Enable SoftKey function configurable. (T28/T26/T22/T12)
7. Added Text-LOGO in T20.
8. Supported EHS36. (T28/T26)
3 Optimization
1. Improved Broadsoft BLF List support. (T28/T26/T22/T20)
2. Supported to logout in web configuration page.
3. Enabled to reset the phone to factory setting by long-pressing ‘Conf’ key. (T12)
4. Enabled to display picture in XML Browser.
5. Enabled to hold the current call when pressing ‘hold’ key instead of setting up a new call before. (T12).
6. Enabled to be set Always Off/Always On to LCD backlight setting. (T28/T26/T22)
7. Enabled to park a call to another server by ‘Call Park’.
8. Enabled the key tone of ‘SENTkey configurable, default is enabled.
9. Enabled to receive a busy tone after the call is busy when ‘Call Completion’ or ‘Auto Redial is enabled.
10. Enable value option of DSSkey-Tran, blind transfer or attend transfer can be configured through it.
11. Added ‘prefixoption in DSSKey to auto enter the prefix number and wait to enter the extension number.
12. ImprovedDEL’ button to the third SoftKey (from the left to the right) in Dial-up and settings interface. (T12)
13. Modified the arrangement of the softkey to be uniform.
14. Modified the default input method is abc both in search and add contact in phonebook.
15. Optimized TR069 web configuration page.
16. Added ‘LDAPoption in DSSKey.
17. Added ‘SWAP’ SoftKey when the phone has two calls at the same time. (T28/T26/T22/T12)
18. Modified the Advanced mode of Hot Desking to be restored to the previous account after logging out.
19. Supported BLA function. (T20/T22 Line Key)
20. Enabled to have a private talk before conference.
Yealink SIP IP Phones V51 Firmware Change Log
2/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
21. Supported to configure Auto Provision on LCD.
4 Bug Fixes
1. Fixed the issue that can’t send DTMF tone of ‘A-D’.
2. Now in Host Desking advanced mode the account will auto log off when other phone override this account.
3. Corrected the parameter of Switzerland busy tone. (T22/T20)
5 Instruction
1. Added Broadsoft DND&FWD synchronization.
Path: Web Setting Page Phone Features
Instruction: This function supports the DND&FWD synchronization with server.
Detail: Please refer to User Manual of version 51 for detail.
2. Added Broadsoft network conference support.
Path: Web Setting Page Account Advanced
Instruction: The Network Conferencing solution is an enterprise-class Meet-Me Conferencing service that utilizes
dedicated Conference Server network elements to bridge large numbers of participants together.
Detail: Please refer to User Manual of version 51 for detail.
3. Added Broadsoft redundant server (DNS-SRV) support.
Path: Web Setting Page Account Basic
Instruction: The DNS SRV allows administrators to use several servers for a single domain, Yealink SIP Phone
will ask for a specific service/protocol for a specific domain (the word domain is used here in the strict RFC1034
sense), and get back the available servers.
Detail: Please refer to User Manual of version 51 for detail.
Yealink SIP IP Phones V51 Firmware Change Log
3/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
4. Added LDAP function. (T28/T26/T22/T12)
Path: Web Setting Page Contacts LDAP
Instruction: LDAP stands for Lightweight Directory Access Protocol which is a client-server protocol for
accessing a directory service. LDAP lets you locate organizations, individuals, and other resources such as files and
devices in a network, whether on the Internet or on a corporate intranet, and whether or not you know the domain
name, IP address, or geographic whereabouts. An LDAP directory can be distributed among many servers on a
network, then replicated and synchronized regularly.
Manual: http://www.yealink.com/fae/LDAP Phonebook instruction.rar
5. Supported EXP39. (T28/T26)
Path: Yealink EXP39 LCD Expansion Module is designed for improving the power and flexibility of the Yealink
advanced IP phones SIP-T26P and SIP-T28P.
Detail: http://www.yealink.com/en/view.asp?ClassLayer=90
Yealink SIP IP Phones V51 Firmware Change Log
4/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
6. Enable SoftKey function configurable. (T28/T26/T22/T12)
Path: Web Setting Page Phone Softkey Layout
Instruction: Now the Softkey that display different call states is configurable.
Detail: Please refer to User Manual of version 51 for detail.
7. Added Text-LOGO in T20.
Path: Web Setting Page Phone Features
Instruction: T20 supported Text Logo, the logo display on the LCD could be edited by ourselves. When the Use
Logo select Enable, The Text Loge option would appear to be edited.
Yealink SIP IP Phones V51 Firmware Change Log
5/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
8. Supported EHS36. (T28/T26)
Instruction: The new and advanced Yealink Headset Adapter EHS36 provides the technical interface between your
Yealink T28P or T26P telephone and a compatible wireless headset. It is approved for use with major manufactures
Plantronics and Jabra wireless models.
9. Improved Broadsoft BLF List support. (T28/T26/T22/T20)
Path: Web Setting Page Account Advanced
Instruction: BLF List is a way of grouping the extensions that are being monitored together. It allows the
extensions being monitored to be controlled by the server, as you only configure a group name (eg sales) and the
server then pushes out the actual extension details to the phone. It also reduces the messaging overhead required to
support multiple BLFs, as you only need to maintain a single SIP dialog for the group, and not one for each BLF
key.
Detail: Please refer to User Manual of version 51 for detail.
10. Supported to logout in web configuration page.
Path: Web Setting Page Security
Instruction: Added a ‘Log Off’ button in the web configuration page, and supported logout by click this button.
Yealink SIP IP Phones V51 Firmware Change Log
6/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
11. Enabled to reset the phone to factory setting by long-pressing ‘Conf’ key. (T12)
Instruction: For Yealink T12, after long-pressing ‘Conference’ key would lead to reset to phone to factory.
12. Enabled to display picture in XML Browser.
Instruction: Now Yealink SIP Phone supported to display picture in XML Browser.
13. Enabled to hold the current call when pressing hold key instead of setting up a new call before. (T12).
Instruction: When Yealink T12 during a call, could hold this call by pressing ‘hold’ key, and if user want to set up
a new call, you could press the number directly.
14. Enabled to be set Always Off/Always On to LCD backlight setting. (T28/T26/T22)
Path: Web Setting Page Phone Preference
Instruction: Added two select options in the Backlight Time options and now supported the LCD backlight Always
Off or Always On.
15. Enabled to park a call to another server by ‘Call Park’.
Instruction: The Call Park’ of DSSKey could select other account, so that could park the call to other server.
16. Enabled the key tone of ‘SENTkey configurable, default is enabled.
Path: It could change this setting through Auto Provision.
Instruction: Enabled the key tone ofSENTkey configurable, default setting is enabled.
17. Enabled to receive a busy tone after the call is busy whenCall Completion’ or ‘Auto Redialis enabled.
Instruction: When Call Completion’ or ‘Auto Redial’ is enabled, user will receive a busy tone when the call is
busy.
18. Enable value option of DSSkey-Tran, blind transfer or attend transfer can be configured through it.
Path: Web Setting Page Phone DSS Key
Instruction: Now the value option of Transfer in the DSSKey is configurable. It is Blind Transfer when there is a
value.
Yealink SIP IP Phones V51 Firmware Change Log
7/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
19. Added ‘prefix’ option in DSSKey to auto enter the prefix number and wait to enter the extension number.
Path: Web Setting Page Phone DSS Key
Instruction: Added ‘prefix’ option in DSSKey. By pressing this option button, Yealink phone would auto enter the
prefix number that was stetted, and waiting for user to enter the extension number.
20. ImprovedDEL’ button to the third SoftKey (from the left to the right) in Dial-up and settings interface. (T12)
Instruction: The DELwas arranged to fixed in the SoftKey3 in different status.
21. Modified the arrangement of the Softkey to be uniform.
Instruction: Arranged some function to fixed SoftKey in different states, for example the Transferkey will
always in the Softkey2.
22. Modified the default input method is abc both in search and add contact in phonebook.
Instruction: Now the default input method is ‘abc’ both in search and add contact in phonebook.
23. Optimized TR069 web configuration page.
Instruction: TR069 web configuration page of TR069 was optimized. (TR069 is an optional function)
24. Added ‘LDAPoption in DSSKey.
Instruction: Added the ‘LDAP’ option in DSSKey.
Yealink SIP IP Phones V51 Firmware Change Log
8/8
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com
25. Added ‘SWAP’ SoftKey when the phone has two calls at the same time. (T28/T26/T22/T12)
Instruction: There is a SWAPsoftkey when the phone has two calls at the same time. The users can switch call
thought this softkey.
26. Modified the Advanced mode of Hot Desking to be restored to the previous account after logging out.
Instruction: Yealink support the advanced mode of Hot Desking to be restored to the previous account after
logging out.
Manual: http://www.yealink.com/fae/How to use Hot Desking on Yealink phones.rar
26. Supported BLA function. (T20/T22 Line Key)
Instruction: T20 and T22 supported to configure the Line Key to BLA function.
27. Enabled to have a private talk before conference.
Instruction: When user invites another number into conference by pressing ‘conf’ key, user will have a private talk
with the third number, then press ‘conf’ key again to build a conference.
28. Supported to configure Auto Provision on LCD.
Path: LCD Menu Settings Advanced Settings Auto Provision
Instruction: Now support to configure Auto Provision on LCD.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Yearlink EXP39 User manual

Category
IP phones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI