Highpoint RocketStor 6314A User guide

1/3

Subject: RS6314A Update subsystem ID Report

Directions：

V1.00

a. First, go to the official website to download the MAC version of the RS63XX_macOS_v1 and RR4520

web pages WEBGUI, open the go.command in RS63XX_macOS_v1 to update the firmware of RR4520

to v1.8.15.0 (this version can be used normally after mac os 10.13), after the update Restart the mac.

b. After restarting, you can find RR4520 in PCI, but the subsystem ID is 0000, so you can't use the new

WEBGUI.

2/3

c. Install the old version of WEBGUIv2.11.0, and then use the RS6314A-ldr.blf file to update the

subsystem ID. After the update, you need to restart the MAC.

d. After restarting the MAC, you will find 0x6314 in the PCI, and you will be able to use the new WEBGUI.

3/3

e. After updating as shown below, you can use it on the new RocketStor RAID Manager v2.18.0.