80 mm
EB-502BTW
1.The earbuds turn on automacally when taken out of the charging case,
The red and blue lights on both earbuds flash alternately
2.The earbuds will pair with each other automacally within a few seconds.
Once paired successfully, the red and blue lights on the main earbud will
flash alternately while the lights on the secondary earbud will turn off.
3.Turn on Bluetooth on your device. Select “EB-502BTW” from the
Bluetooth device list. Once connected, the light on both earbuds will turn
off.
4.Aer the first successful connecon with the Bluetooth device, the
earbuds will automacally connect with the device whenever turned on.
1.Both earbuds can be used independently.
2.Take out one earbud from the charging case. The earbud will turn on
automacally. The red and blue lights on the earbud will flash alternately
3.Turn on Bluetooth on your device. Select “EB-502BTW” from the Bluetooth
device list. Once connected, the light of the earbuds will turn off.