Powerfist 8990848 Owner's manual

Powerfist
Brand
Powerfist
Model
8990848
Type
Owner's manual

Powerfist 8990848 is a framing air nailer specifically designed for driving nails into wood framing. With its lightweight and compact design, it's easy to maneuver and operate, making it suitable for both professional contractors and DIY enthusiasts. It features a high-power motor that delivers the necessary force to drive nails quickly and efficiently, saving you time and effort during your projects. The adjustable depth control allows you to set the desired depth for precise nail placement, ensuring a secure and professional-looking finish.

Powerfist 8990848 is a framing air nailer specifically designed for driving nails into wood framing. With its lightweight and compact design, it's easy to maneuver and operate, making it suitable for both professional contractors and DIY enthusiasts. It features a high-power motor that delivers the necessary force to drive nails quickly and efficiently, saving you time and effort during your projects. The adjustable depth control allows you to set the desired depth for precise nail placement, ensuring a secure and professional-looking finish.

FRAMING AIR NAILER
SPECIFICATIONS
HAZARD DEFINITIONS
INTRODUCTION
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic
precautions to reduce the risk of personal injury
and/or damage to the equipment.
WORK AREA
PERSONAL SAFETY
WARNING! Wear personal protective equipment
approved by the Canadian Standards Association (CSA)
or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
PERSONAL PRECAUTIONS
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with
product (gained from repeated use) replace strict
adherence to the tool safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious personal
injury.
AIR TOOL PRECAUTIONS
AIR HOSE PRECAUTIONS
VIBRATION PRECAUTIONS
UNPACKING
WARNING! Do not operate the tool if any part is
missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and
personal injury.
IDENTIFICATION KEY
ASSEMBLY &
INSTALLATION
OPERATION
CARE & MAINTENANCE
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user and/or others.
WARNING! Disconnect the tool from the air supply
before clearing jammed fasteners.
LUBRICATION
NOTICE! NEVER use a penetrating oil to lubricate the
tool. Penetrating oil may act as a solvent that can
break down the grease and cause the tool to seize up.
DISPOSAL
IMPORTANT! DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil.
TROUBLESHOOTING
Problem(s)
Possible Cause(s)
Suggested
Solution(s)
PARTS BREAKDOWN
PARTS LIST
#
DESCRIPTION
CLOUEUSE PNEUMATIQUE
À CHARPENTE
SPÉCIFICATIONS
DÉFINITIONS DE DANGER
INTRODUCTION
SÉCURITÉ
AVERTISSEMENT ! Veuillez lire et comprendre toutes
les instructions avant d'utiliser cet outil. L'utilisateur
doit respecter les précautions de base lorsqu'il utilise
cet outil afin de réduire le risque de blessure ou de
dommage à l'équipement.
AIRE DE TRAVAIL
SÉCURITÉ PERSONNELLE
AVERTISSEMENT ! Portez de l'équipement de
protection personnelle homologué par l'Association
canadienne de normalisation (CSA) ou l'American
National Standards Institute (ANSI).
ÉQUIPEMENT DE PROTECTION PERSONNELLE
PRÉCAUTIONS PERSONNELLES
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Powerfist 8990848 Owner's manual

Powerfist
Brand
Powerfist
Model
8990848
Type
Owner's manual

Powerfist 8990848 is a framing air nailer specifically designed for driving nails into wood framing. With its lightweight and compact design, it's easy to maneuver and operate, making it suitable for both professional contractors and DIY enthusiasts. It features a high-power motor that delivers the necessary force to drive nails quickly and efficiently, saving you time and effort during your projects. The adjustable depth control allows you to set the desired depth for precise nail placement, ensuring a secure and professional-looking finish.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents