Palstar SP30HP Owner's manual

Palstar products are designed by

Hams for Hams carrying on the

Palstar tradition for high-quality

products designed and

manufactured in Ohio, USA.

9676 N. Looney Rd,

Piqua, OH 45356 USA

(937) 773-6255

(800) 773-7931

(937) 773-8003 (Fax)

www.palstar.com

PALSTAR

SP30HP 30 Watt Powered

Communications Speaker

Designed and Manufactured in the USA

PALSTAR

SP30HP Ultimate

Communications Speaker

 30 Watts RMS powered speaker

 Hand-made wood cabinet in black nish

 6 1/2” speaker with 11.6 oz. magnet

 Frequency range of: 55 Hz to 8 kHz

 11” wide x 8 1/4” high x 10” deep

Designed and Manufactured in the USA

Mono Inputs: +/- Gold-plated banana plugs and 3.5mm jack

Rear Panel Diagram

Stereo Input: Bluetooth aptX 4.0

Mono Output

Power On/O

3.5mm and +/- wire monaural inputs.

Bluetooth input will accept both monaural and stereo input. Output is

monaural. The internal Bluetooth receiver will connect automatically

to your Bluetooth device.

The Bluetooth ID will appear as PALSTAR in your device settings.

Inputs:



High-level input from your transceiver or other source is attenuated

to a low-level signal by means of an internal attenuator.

Volume is controled by the volume control of your transceiver or other source.

