FOR BETTER LIFE
Before using this equipment, please read all “Safety Instructions”
Carefully to ensure safe and correct operation
FOR BETTER LIFE
Before using this equipment, please read all “Safety Instructions”
Carefully to ensure safe and correct operation
FOR BETTER LIFE
Before using this equipment, please read all “Safety Instructions”
Carefully to ensure safe and correct operation
User Manual
T-202A
T-202TV
T-202PAD
T-203A
T-203TV
T-203PAD
CONTENTS
1. SPECIFICATIONS .................................................................................................................................... 1
2. SAFETY INSTRUCTION
S
....................................................................................................................... 2
3. COMPONENT PARTS ............................................................................................................................. 4
4. DESCRIPTION .......................................................................................................................................... 5
5. INSTALLATION LOCATION ................................................................................................................. 5
6. ASSEMBLY AND INSTALLATION ....................................................................................................... 6
7. PART NAMES ......................................................................................................................................... 13
8. CONSOLE – FEATURES AND FUNCTIONS ...................................................................................... 15
9. OPERATION INSTRUCTIONS ............................................................................................................ 17
10. REPLACEMENT OF PARTS ................................................................................................................. 19
11. LUBRICATION ....................................................................................................................................... 20
12. MAINTENANCE LIST ............................................................................................................................ 21
13. TROUBLE-SHOOTING ......................................................................................................................... 21
14. SELF-CHECK ........................................................................................................................................... 22
14.1. Customer’s right .................................................................................................................................. 23
14.2. Chargeable Services ............................................................................................................................. 23
SPECIFICATIONS
1.
SPECIFICATIONS
T-202
Items
Value
1) Speed
0.5~20 KM/H
2) Gradient
0~25%, +1.25%
3) AC Motor
Normal: 3HP , max:7HP
4) Belt
3450*600*2.5 mm
5) Runway Area
1600*600 mm
6) Assembling
2240*980*1660mm
7) Max loading
200KG
8) Power
220V/110V 50~60 HZ
Models
TV and MP3
Display / Screen
N.W. / G.W.
Remarking
T-202A
N/A
N/A
210KG / 225KG
T-202TV
N/A
19/17/15 inch External
ordinary Screen
212KG / 228KG
T-202PAD
Support
15.6inch Android Pad
Interior Touch Screen
228KG / 232KG
T-203
Items
Value
1) Speed
0.5~20 KM/H
2) Gradient
0~25%, +1.25%
3) AC Motor
Normal: 3HP , max:7HP
4) Belt
3450*580*2.5 mm
5) Runway Area
1600*565 mm
6) Max loading
200KG
7) Power
220V/110V 50~60 HZ
Models
TV and MP3
Display / Screen
N.W. / G.W.
Remarking
T-203A
N/A
N/A
210KG / 225KG
T-203TV
N/A
19/17/15 inch External
ordinary Screen
212KG / 228KG
T-203PAD
Support
15.6inch Android Pad
Interior Touch Screen
228KG / 232KG
1
DESCRIPTION
4.
DESCRIPTION
T203 series is designed for use in Gyms or fitness centers with the most innovative design. Using powerful 3HP( continuous )
AC motor with the latest inverter control technology, it runs quietly, softly and safely.
FEATURES
• The most innovative design
• Attachable 15 inch LCD
• Single-framed aluminum frame with graceful design
• The ultimate Cardio Workout Program especially for your needs
• The world-renowned POLAR Heart Rate Monitoring System
5.
INSTALLATION LOCATION
•Please check if the ground surface is level and solid. Otherwise, it may cause noise, vibration, and tripping over.
•Please check if the location is indoors with low humidity and dust level. Humidity and dust may cause machine break-down.
•Please check if any solvent or inflammable substance is nearby.
In case electric spark occurs within the machine due to electric leakage or static, it may lead to an explosion or fire.
•Please allow enough space from surrounding fixtures.
Please install the machine with enough space in front to allow easy access to the power switch. To ensure safe use, allow
spaces of at least 2m at the back and 1m on each side.
•Please link less than 2 sets of Treadmill with power cable coming from one 30A ELB(Earth Leakage Breaker)
Over load current could generate abnormal operation of Treadmill
•Please use standard plug and socket and make sure the power outlet has been grounded.
•When moving, lift up the bottom of rear cover so that the machine can be moved easily on front wheels. 7
•If the entire machine has to be hauled up, 4-5 adults should do it carefully to avoid injury or accident.
5
ASSEMBLY AND INSTALLATION
6.
ASSEMBLY AND INSTALLATION
After unpacking all the components, assemble and install the machine as per the following procedure.
CAUTION
Power connection should be at standard
voltage
Treadmill should be mounted on level floor. Avoid uneven surface.
After the installation, Treadmill should be
grounded.
Please remove any foreign material from around motor area before the test
operation.
Detaching the Motor Cover
1. Pull out 4 screws (5mm) at each corner of the motor
cover with a screwdriver
2. Lift the cover up to detach it from the frame.
Use bolts and tool
A. Phillips Screwdriver
B. M5 X 20 Pan head screw x 4pcs
Body
6
ASSEMBLY AND INSTALLATION
1
2
3
Attaching the Posts Assembly
1. Insert posts (left & right) into the post guides at the front
of the main frame body
2. Loosely tighten 8 bolt washers fastening the bottom of
the posts (4 each left & right)
Use bolts and tool
A. 8mm L-wrench
B. M10 × 60 Hex socket head cap screw 4pcs
4
C. M10/2t Washer 12pcs
D. 6mm L-wrench
E. M10 X 20 Hex socket button head cap screw 8pcs
CAUTION:
Nuts must be tightened firmly; Otherwise, it may cause
noise, vibration and Breakdown. Screw bolts into the
nuts before positioning and tighten them in turn
POST
7
ASSEMBLY AND INSTALLATION
1
2
3
2. Attaching the Console Assembly
1) Insert the legs of Console Assembly into the left and
right post
2) Pushing 3 cords through the post.
3) Loosely tighten 4 bolts with nuts fastening the bottom
of the Console Assembly to the top of the posts (2 bolts
each left & right)
4) After assembling the console part, tighten all bolts
surely and tightly
Use bolts and tool
A. 6mm L-Wrench
B. M10 X 20 Hex Socket Head Cap Screw (right & left)
4pcs
C. M10/2t Washer (right & left) 8pcs
CAUTION :
Nuts must be tightened firmly. Otherwise, it may cause noise,
vibration and Breakdown. Screw bolts into the nuts before
positioning and tighten them in turn.
4
Console Assembly
Use bolts and tool
A B C
8
ASSEMBLY AND INSTALLATION
1
2
Wiring of Console
the Actuator, Motor and Input cables on the Inverter are
assembled to the Socket in the factory in advance
1. Pull 3 cords through the post out of a hole at the lower
side of the post (A:UTP Cable, B:TV Antenna Cable C:TV
power Cable)
2. Insert the UTP Cable into the Socket of the Inverter.
3. Join TV Antenna Connectors
4. Join TV power Jacks for DC 12 Voltage
WARNING : Use of any plug or a cord that is not
grounded may cause electric shock or malfunction of the
machine
3
4
Wiring of Console
9
ASSEMBLY AND INSTALLATION
AC Power connection and TV Antenna Cable
1. Insert the Antenna Cable to the Antenna Socket on the
Front Cover (This section applies only to models with TV)
2. T203 should use grounded socket and power cord. Insert
the power cord provided to the power inlet at the front of
main body and connect the power plug to the grounded
socket
3. Press the red lamp to turn on the main body.
CAUTION
•Pull off the power plug while not in use for a long period
of time.
•Only use standard power cord.
•Do not use extension of power cord.
•Do not use damaged power cord.
•Do not leave the power cord exposed on a frequented
passage.
•Do not leave the power cord in damp area or near the in
flammable material.
•If the Treadmill is moved or removed, pull off the power
plug first.
•If the supply cord is damaged, it must be replaced by a
special
cord or assembly from the manufacturer or its service agent
Adjusting Level Foot
1. Screw/unscrew the level pads at the bottom of the frame
using, if necessary, a spanner to adjust levelness of the
frame.(Clockwise/frame down, Counterclockwise/ frame
up)
2. When levelness has been achieved, turn the locking nuts
3. Upward (counterclockwise) to lock the level pads firmly.
CAUTION:
If the machine is not precisely leveled, it may Cause noise,
side drifting of running belt and reduce durability of the
Treadmill.
Use bolts and tool
24mm Spanner
Belt tension and side-drift adjustment.
Belt tension must be adjusted whenever the machine was first installed or moved. Otherwise, it may cause slipping or
damage of belt or worn-down and breakage of other parts. Belt adjustment consists of belt tension adjustment and level
adjustment.
11
ASSEMBLY AND INSTALLATION
Note: Turn the belt adjustment screw-heads in end-cover using 8 mm hexagon wrench to adjust the belt as shown in the
above
Adjustment with T-Wrench and movement change of belt and roller
Belt
Section
Wrench
movement
Roller shaft movement
Side-drifting
Left
(Fig. 1)
w
Left side backward
To the right
Counterclockwise
Left side forward
To
the left
Right
(Fig. 2)
Clockwise
Right side backward
To the left
Counterclockwise
Right side forward
To the right
Adjustment of Tension
It is adjustment of distance between front and back rollers to obtain optimal tension of
the belt which is necessary to prevent slipping of the belt during running.
1. Turn the power on.
2. Operate the machine at 4km/h.
3. Holding the handgrip, push the belt with foot to the opposite direction of
running. If the belt momentarily stops (slips), then adjustment is necessary.
4. Adjust belt tension turning the adjustment screws left or right using hexagon
wrench. Repeat the process until no slippage occurs.
Adjustment of Side-drifting
After the adjustment of belt tension, adjust side-drifting as
follows
1. Increase the belt speed to 10 km/h.
2. Adjust belt balance using 8mm hexagon wrench while
visually checking the belt for side-drifting.
3. If no sign of side-drifting shows after 5 minutes, then
the balance of belt has been achieved. If side-drifting
occurs within 5 minutes, repeat the process until
balance is achieved.
4. If necessary, talce out the motor and adjust belt balmce
by using 8mm L-wrench as shown in the picture
CAUTION: Do not turn the wrench without checking the
change in belt movement. Too much turning will push the
belt to one side and can damage it. It is recommended to
turn the wrench by 1/4 or by 1/8 revolution at a time for
precise adjustment.
12
PART NAMES
7.
PART NAMES
CONSOLE
A
Console cabinet
B
Display
C
Main Control
D
Urethane Handgrip(L)
E
Urethane Handgrip(R)
F
Emergency Stop
G
HEADPHONE JACK HOUSING
H
Console Cabinet
I
Seal-Label for after-sales service
J
Front Handgrip
BODY
A
Motor Cover
B
Running belt
C
Non-slip
D
Main frame
E
Front-cover
F
Front-wheel
G
End-cover
H
Level Foot
13
OPERATION INSTRUCTIONS
9.
OPERATION INSTRUCTIONS
1
MANUAL WORKOUT
1. Turn the POWER on.
Press POWER switch located on the front cover.
2
2. Press START button.
Press START button. Then the running belt will start to
move at the starting speed of 1.0km/h.
CAUTION : The START/STOP button toggles between
start
and stop, i.e., first pressing starts operation and
pressing it again stops the operation, and so on.
3
3. Adjust SPEED and/or INCLINE.
Adjust speed or incline as the user wishes by pressing
the SPEED or INCLINE button
4
4.. Press STOP button to finish the workout
When the user pushes the STOP button, the
MESSAGE window displays “Workout Resume” and
this message remains for 30 seconds. After showing the
Workout Resume, the screen automatically converts
Into the TV screen, this is a stand-by screen.
WARNING: When the treadmill stops with the
EMERGENCY STOP, it does not show the “Workout
Resume”. When you are going to step down during
running of the machine or wish to stop the machine
WARNING: When the treadmill stops with the
EMERGENCY STOP, it does not show the “Workout
Resume”. When you are going to step down during
running of the machine or wish to stop the machine
17
OPERATION INSTRUCTIONS
Power
TARGET WORKOUT
1. Turn the power ON.
Press POWER switch located on the front
cover.
2. Select one of the workout targets.
Press one of the WORKOUT TARGET
buttons (TIME, DISTANCE, CALORIES) on
the main display
3. Gender enter.
Input gender with target +/_ button, and push
ENTER
4. weight enter
Input weight with target +/_ button, and push
ENTER
5. target value of enter
Input target value with speed +/_ button, and
push
START
If the user selected the TIME as a workout
target in the step 2, the default time, 30
minutes will be shown in the TIME window.
In this step, user can change the workout target
by pushing one WORKOUT TARGET button.
At the end of the duration, the workout goes
into a cool- down phase and the speed and
inclines decrease. Cool down is a low-intensity
phase that allows the body
to begin removing lactic acid, and other
exercise by- products, which build up in
muscles and contribute to soreness.
The cool-down lasts for 3 minutes.
After the cool-down, workout resume is
displayed for 30 seconds.
Note : During the target workout, the speed
and incline can be adjusted by the user while
they can not be changed by the user in the
program workouts.
Workout targets
Workout
targets
data input
Confirmation
start
18
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
