Day-Brite CFI FluxPanel LED Install Instructions

Type
Install Instructions

This manual is also suitable for

Day-Brite CFI FluxPanel LED is a luminaire designed for various commercial applications, offering energy efficiency and advanced lighting control capabilities. With its LED technology, this luminaire provides long-lasting performance and reduces energy consumption compared to traditional lighting systems. The FluxPanel LED is suitable for use in offices, schools, healthcare facilities, and retail spaces. It can be installed on T-bars or ceilings, providing flexible mounting options.

Day-Brite CFI FluxPanel LED is a luminaire designed for various commercial applications, offering energy efficiency and advanced lighting control capabilities. With its LED technology, this luminaire provides long-lasting performance and reduces energy consumption compared to traditional lighting systems. The FluxPanel LED is suitable for use in offices, schools, healthcare facilities, and retail spaces. It can be installed on T-bars or ceilings, providing flexible mounting options.

B
DETAIL B
SCALE 1 : 7
Ceiling Tile
Bracket
Sensor
Screw
Mounting Bracket to T-bar
1. Snap bracket onto T-bar in desired
location. (For best wireless
communication, mount bracket near
the center of the T-bar)
2. Secure bracket to T-bar with provided
sheet metal screw.
Maintenance/Replacing Sensor
1. Remove sensor mounting ring from
below bracket.
2. Remove sensor from top side of
bracket.
3. Remove leads from sensor by using
release button on side of sensor.
4. Plug in new sensor and secure
sensor to bracket using sensor
mounting ring.
Sensor Mounting Ring
Bracket
Sensor
CAUTION: THE INSTALLATION AND SERVCING OF THIS PRODUCT SHOULD
BE PERFORMED BY A QUALIFIED ELETRICIAN OR SERVICE PERSONNAL
FluxPanel- Interact Pro
FPZ
442295201935
ATTENTION : L’INSTALLATION ET L’ENTRETIEN DE CE PRODUIT DOIVENT ETRE
EFFECTUÉS PAR UN ÉLECTRICIEN OU UN MEMBRE DU PERSONNEL QUALIFIÉ.
CAUTION: Electrical luminaires are designed for permanent installation in ordinary (non-hazardous) locations in accordance with the National Electrical
Code and all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and luminaire operate at high
temperatures, contact with combustible materials can cause fire and personal contact can cause severe burns.
ATTENTION: Ce luminaire a été conçu pour une installation permanente dans un emplacement régulier (non dangereux) et en conformité avec le Code
électrique canadien et codes locaux applicables. Ne jamais installer dans un endroit où la ventilation est limitée ou dans des boîtiers où la température
ambiante est très élevée. La lampe et le luminaire fonctionnent à des températures élevées, un contact avec des matériaux combustibles peut engendrer un
incendie et un contact corporel peut causer de sévères brûlures
© 2019 Signify Holding. All rights reserved. This document may be subject to change. No
representation or warranty as to the accoracy or completeness of the information
included herein is given and any liability for any action in reliance thereon is disclaimed.
All trademarks are owned by signify holding or their respective owners.
Signify Canada Ltd.
281 Hillmount Road
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Telephone: 855-486-2216
C
DETAIL C
SCALE 1 : 7
Tuile de plafond
Support
Capteur
Vis
Support de montage pour barre en T
1. Fixer le support sur la barre en T, à
l'endroit désiré (pour favoriser la
communication sans fil, monter le
support près du centre de la barre en T).
2. Fixer le support à la barre en T à l'aide de
la vis à métal fournie.
Maintenance/remplacement du capteur
1. Retirer la bague de montage du capteur
du support ci-dessous.
2. Retirer le capteur du côté supérieur du
support.
3. Retirer les électrodes du capteur à l'aide
du bouton de libération se trouvant sur
le côté du capteur.
4. Brancher le nouveau capteur et fixer
le capteur au support à l'aide de la
bague de montage du capteur.
Capteur
Support
Bague de montage
du capteur
CAUTION: THE INSTALLATION AND SERVCING OF THIS PRODUCT SHOULD
BE PERFORMED BY A QUALIFIED ELETRICIAN OR SERVICE PERSONNAL
FluxPanel- Interact Pro
FPZ
442295201935
ATTENTION : L’INSTALLATION ET L’ENTRETIEN DE CE PRODUIT DOIVENT ETRE
EFFECTUÉS PAR UN ÉLECTRICIEN OU UN MEMBRE DU PERSONNEL QUALIFIÉ.
CAUTION: Electrical luminaires are designed for permanent installation in ordinary (non-hazardous) locations in accordance with the National Electrical
Code and all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and luminaire operate at high
temperatures, contact with combustible materials can cause fire and personal contact can cause severe burns.
ATTENTION: Ce luminaire a été conçu pour une installation permanente dans un emplacement régulier (non dangereux) et en conformité avec le Code
électrique canadien et codes locaux applicables. Ne jamais installer dans un endroit où la ventilation est limitée ou dans des boîtiers où la température
ambiante est très élevée. La lampe et le luminaire fonctionnent à des températures élevées, un contact avec des matériaux combustibles peut engendrer un
incendie et un contact corporel peut causer de sévères brûlures
© 2019 Signify Holding. All rights reserved. This document may be subject to change. No
representation or warranty as to the accoracy or completeness of the information
included herein is given and any liability for any action in reliance thereon is disclaimed.
All trademarks are owned by signify holding or their respective owners.
Signify Canada Ltd.
281 Hillmount Road
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Telephone: 855-486-2216
  • Page 1 1
  • Page 2 2

Day-Brite CFI FluxPanel LED Install Instructions

Type
Install Instructions
This manual is also suitable for

Day-Brite CFI FluxPanel LED is a luminaire designed for various commercial applications, offering energy efficiency and advanced lighting control capabilities. With its LED technology, this luminaire provides long-lasting performance and reduces energy consumption compared to traditional lighting systems. The FluxPanel LED is suitable for use in offices, schools, healthcare facilities, and retail spaces. It can be installed on T-bars or ceilings, providing flexible mounting options.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI