Signature S40004N Your Safety & Instruction Manual

Type
Your Safety & Instruction Manual
4 IN 1 AIR PURIFIER AND
HUMIDIFIER
YOUR SAFETY &
INSTRUCTION MANUAL
MODEL
S40004N
PLEASE READ CAREFULLY
signaturebrand.co
TECHNICAL DATA
Description:
4 in 1 Air Purifier and
Humidifier
Model:
S40004N
Rated Voltage:
220-240V
Frequency:
~50Hz
Power consumption:
2000W
DOCUMENTATION
We declare that this product conforms to the following product legislation in accordance
with the following directive(s):
2014/30/EU
Electromagnetic Compatibility
Directive.
2014/35/EU
Low Voltage Directive.
RK Wholesale LTD Quality Assurance, United Kingdom
WARRANTY
This product is guaranteed for 12 months from the date of original purchase. If any
defect arises due to faulty materials of workmanship, the faulty products must be
returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
The product must be returned to the retailer with proof of purchase.
The product must be installed and used in accordance with the instructions
contained in this instruction guide.
It must be used only for domestic purposes.
It does not cover wear and tear, damage, misuse or consumable parts.
RK Wholesale LTD has limited liability for incidental or consequential loss or
damage.
This guarantee is only Valid in the UK and Eire Only.
An extended warranty is available for this appliance.
See back page for details.
signaturebrand.co 3
WIRING SAFETY FOR UK USE ONLY
IMPORTANT
As the colours in
the mains lead of
this appliance may
not correspond
with the coloured
markings
identifying the
terminals in your
plug, please proceed as follows:
The wires in the mains lead are coloured
in accordance with the following code:
Blue neutral [N] Brown live [L]
Plug Fitting Details (Where
Applicable). The wire coloured blue is
the neutral and must be connected to
the terminal marked [N] or coloured
black.
The wire coloured brown is the live wire
and must be connected to the terminal
marked [L] or coloured red.
On no account must either the brown or
the blue wire be connected to the
[EARTH] terminal . Always ensure that
the cord grip is fastened correctly.
The plug must be fitted with a fuse of the
same rating already fitted and
conforming to BS 1362 and be ASTA
approved.
If in doubt consult a qualified electrician
who will be pleased to do this for you.
Non-Rewireable Mains Plug
If your appliance is supplied with a
nonrewireable plug fitted to the mains
lead and should the fuse need replacing,
you must use an ASTA approved one
(conforming to BS 1362 of the same
rating).
If in doubt, consult a qualified electrician
who will be pleased to do this for you. If
you need to remove the plug
disconnect it from the mains and then
cut it off of the mains lead and
immediately dispose of it in a safe
manner. Never attempt to reuse the plug
or insert it into a socket outlet as there is
a danger of an electric shock.
WARNING:
This appliance is double insulated.
Do not connect any wire to the earth terminal.
PRODUCT SAFETY
When using any electrical appliance, basic safety
precautions should always be followed including the
following:
Check that the voltage of
the main circuit
corresponds with the rating
of the appliance before
operating.
Please ensure that the
appliance is used on a
stable, level, and heat
resistant surface.
DO NOT immerse cords,
plugs or any part of the
appliance in water or any
other liquid.
DO NOT leave the
appliance unattended while
it is operating.
Close supervision is
necessary when any
appliance is used by or
near children or pets.
This appliance can be used
by children aged from 8
years and above and
persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved.
Children shall not play with
the appliance.
Cleaning and user
maintenance shall not be
made by children without
supervision.
Switch off at the wall socket
then remove the plug from
the socket when not in use
or before cleaning.
If the supply cord or
appliance is damaged, stop
using the appliance
immediately and seek
advice from the
manufacturer or its service
agent or a similarly qualified
person.
DO NOT let the cord hang
over the edge of a table or
counter or let it come into
contact with any hot
surfaces.
The use of accessory
attachments is not
recommended by the
appliance manufacturer,
apart from those supplied
with this product.
DO NOT pull the plug out
by the cord as this may
damage the plug and/or the
cable.
DO NOT use this product
for anything other than its
intended use.
This appliance is for
household use only.
DO NOT carry the
appliance by the power
cord.
DO NOT use the appliance
outdoors.
Use the appliance in a
wellventilated area.
DO NOT use the appliance
near explosive and
signaturebrand.co 5
combustible gas. Avoid
long-term direct solar
radiation. DO NOT locate
the item directly below the
socketoutlet and outdoor.
DO NOT use the same
socket with other items.
DO NOT let water exceed
the “MAX” scale at any
time. When operating the
appliance, the water should
not be below “MIN” scale.
After adding water to the
water tank, DO NOT tilt or
knock the appliance. If you
wish to move the appliance,
please push it slowly from
the side in order to avoid
spilling.
DO NOT cover the wind
outlet.
DO NOT use the appliance
near water.
Caution: DO NOT operate
the appliance with wet
hands.
In the unlikely event the
appliance develops a fault,
stop using it immediately
and seek advice from the
Customer Support Team.
ROTATING PARTS
WHAT’S IN THE BOX
Instruction Manual
Heater
Remote
Ice box x 2
Castors x 4
1. Warm/cool dial
2. Indicating light and control panel
3. On/off switch
4. Remote receiving window
5. Wind outlet
6. Water level window
7. Handle
8. Air Filter (not shown)
9. Power cord (not shown)
10. Water tank (not shown)
11. Castors
12. Remote control
BEFORE YOUR FIRST USE:
1. Remove the parts from the packaging.
2. Assemble as instructed.
3. Your appliance is now ready for normal use.
12
1
2
3
5
6
4
7
8
9
10
11
signaturebrand.co 7
Dispose of the packaging in a responsible
manner.
Timer
Select between 0.5 to 7.5 hours.
Press the button repeatedly to
increase in 1/2 hour segments.
Example timer setting 5 1/2 hours
Once the set time period has been
reached the appliance will turn off.
Cool
Make sure that the warm/cool dial
is set at cool. Press this button
after you have added water and
ice boxes to the water tank. The
air cooler will increase the
humidity before the temperature
decreases.
Putting the frozen ice boxes in the
water tank will enhance the cooling
effect. When the water in the water
tank is low, an alarm will sound for
a few seconds, and the icon will
flash reminding you to top up the
water in the tank.
First Press - Cool Function icon
and two fan icons will be
illuminated.
Second Press - Humidity
Function the will turn off
Swing
Press this button, the
icon will illuminate.
The appliance will
automatically move left and
right, to distribute more air
around the room.
Anion
Press this button, the icon will
illuminate. The appliance will
releases Anions to purify the
surrounding atmosphere. This
function works when the warm/cool
dial is set to either!
Mode
(remote
Control)
Set the Warm/Cool dial to Cool.
Press the mode button
on the remote control once for the
natural wind function. The natural
wind indicator on the
control panel will illuminate and the
wind speed will vary automatically.
Press the mode button a second
time for the sleeping wind function.
The sleeping wind
indicator on the control panel will
illuminate and the wind speed will
vary automatically.
Button
Use
On/Off
Switch
(side of
appliance)
Switches power on or off. This
must be on to use any of the
below applications
On/Off
Press this button to switch the
appliance on or off. If in
warm setting the icon will
illuminate. If cool setting
the icon will illuminate.
Speed
The speed button cannot be used
with the warm function.
There are three speed settings:
Low, Medium and High. Press the
button repeatedly to move through
the settings.
Low speed -
Medium speed -
ASSEMBLY OF THE APPLIANCE
Attach the four castors to the bottom of the
appliance by screwing them into place.
CAUTION: Ensure the product is fully
assembled before plugging it into an electrical
outlet.
USING YOUR APPLIANCE:
Warm/Cool Dial:
On the top of the appliance there is a cooling
and heating dial. Adjust this to ‘cool’ when you
require cool air, or ‘warm’ when you require
warm air.
CONTROL PANEL
Control Panel Functions
Note: All of the functions above work
with both the manual control panel and
the remote control, but the icons may
slightly differ in appearance on the
remote control.
USING THE WATER TANK & ICE BOX:
Water tank:
1. Pull the water tank half way out of
the appliance.
2. Slowly fill the tank with cold water.
Pay attention to the water level
markings on the tank to ensure you
do not over or under fill the tank.
3. Once you have filled the tank to the
appropriate level, push the tank
back into the appliance.
High speed -
Warm
Choose between 1000W and
2000W .
signaturebrand.co 9
4. When the appliance is in operation
the water will circulate around the
system and back into the water
tank.
5. Adding ice or the frozen ice box to
the water tank can enhance the
cooling effect.
Ice Box:
1. Place the ice boxes in the fridge or
freezer before use to ensure they
are completely frozen.
2. Place one frozen ice box in the
water tank.
Note: Two ice boxes are included so
they can be used alternatively.
Warning: Please keep the ice box away
from children and animals as it is a
chemical based substance that is
harmful if swallowed.
Ensure the ice box is not exposed to
direct sunlight.
CLEANING AND CARE
Before cleaning the appliance, ensure it
is disconnected from the power supply
and has cooled down completely.
Do not use abrasives or harsh cleaning
solutions.
Do not immerse the appliance in any
liquid. To clean the exterior, a slightly
damp, lint-free cloth may be used.
Cleaning the filter:
To remove the air filter, unscrew it
from the back of the of the Air Cooler
& Heater using a Philips screw driver.
Remove the air filter from the appliance
and clean it first with a brush and neutral
detergent, and then with clean water.
Allow it to air dry before placing back in
the appliance.
Cleaning the cooling pad:
After removing the air filter, remove the
cooling pad. Clean the cooling pad with
a brush and neutral detergent, and then
rinse with clean water. Allow it to air dry
before placing back in the appliance.
Cleaning the water tank:
Pull out the water tank from the back of
the Air Cooler & Heater and clean it in
warm, soapy water. Allow to dry and
reinstall.
signaturebrand.co 11
WARNING:
DO NOT IMMERSE ANY
ELECTRICAL PART OF THE
APPLIANCE IN WATER SUCH AS
MOTOR UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION
FOR FURTHER
INSTRUCTIONS.
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown
here may not be disposed of in
domestic rubbish.
the recycling of electrical items
purchased in Ireland.
The WEEE directive, introduced in
August
2006, states that all electrical items
must be recycled, rather than taken
to landfill.
Please arrange to take this appliance
to your local Civic Amenity site for
recycling, once it has reached the end
of its life.
NOTES
signaturebrand.co 13
NOTES
We hope you enjoy your appliance for many years.
As a thank you for purchasing one of our fantastic
products, we are offering you an extra 1 year peace of
mind.
*To receive your extra guarantee period, register your
appliance online within 28 days of purchase by visiting:
signaturebrand.co
Make sure to retain your original receipt.
Should you have a problem
Distributed throughout the UK by RK Wholesale LTD
1217.V3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Signature S40004N Your Safety & Instruction Manual

Type
Your Safety & Instruction Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI