MiLAN MIL-4650 User manual

MiLAN
Brand
MiLAN
Model
MIL-4650
Category
Network media converters
Type
User manual

This manual is also suitable for

MIL-9100X
Media Conversion System
User’s Guide
Sunnyvale, California
Minnetonka, Minnesota
Part #: 90000081 Rev. C
LEGAL
Trademark Rights
© 2004 The MiLAN logo and MiLAN Technology trademarks areregistered trademarks of MiLAN Technology in
the United States and/or other countries.
Information in this document is subject to change without notice and does not represent a commitment on the part
part of MiLAN Technology. MiLAN Technology provides this document [as is,] without warranty of any kind,
either expressed or implied, including, but not limited to, the implied warranty of fitness or merchantability for
a particular purpose. MiLAN Technology may make improvements and/or changes in this manual or in the product(s)
and/or the program(s) described in this manual at any time.
This document could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes may be incorporated in new editions of the publication.
The MiLAN Technology Five-Year Limited Warranty
MiLAN Technology warrants to the original consumer or purchaser that each of its products, and all
components thereof, will be free from defects in material and/or workmanship for a period of five years from the
original factory shipment date. Any warranty hereunder is extended to the original consumer or purchaser and is not
assignable. MiLAN Technology makes no express or implied warranties including, but not limited to, any implied
warranty of merchantability or fitness for a particular purpose, except as
expressly set forth in this warranty. In no event shall MiLAN Technology be liable for incidental or
consequential damages, costs, or expenses arising out of or in connection with the performance of the product
delivered here under. MiLAN Technology will in no case cover damages arising out of the product being used in a
negligent fashion or manner.
Regulatory Approvals
FCC Class
UL 195
CSA 22 No. 950
EN60950
CE
EN55022 Class A
EN50082-1
Canadian EMI Notice
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numÈrique de la classe A respecte toutes les exigences du RËglement sur le matÈriel brouilleur du
Canada.
European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/
23/EEC) issued by the commission of the European Community. Compliance with these directives implies conformity
to the following European Norms:
EN55022 (CISPR 22) - Radio Frequency Interference
EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity
EN60950 (IEC950) - Product Safety
Year 2000 Compliance
MiLAN Technology warrants that the MIL-9100X is year 2000 compliant.
See www.milan.com for additional information on other products.
To Contact Technical Support
For prompt response when calling for technical support, have the following information ready: product serial
number, date of purchase, vendor or place of purchase.
Contact one of the following:
Telephone: +1.408.744.2751 or email: [email protected]
Table of Contents
MIL-9100X Media Conversion System iii
T
O
C
Table of Contents
Chapter 1: Introduction
Overview of the MIL-9100X..................................................................................1-1
Features ....................................................................................................................1-1
Media Converters ...................................................................................................1-1
Chapter 2: Installation
Installation Requirements......................................................................................2-1
Installing a MIL-9100X...........................................................................................2-1
Installing a Second Power Supply........................................................................2-2
Appendix A:Specifications
Diagnostic LEDs...................................................................................................... A-1
Hardware Features.................................................................................................A-1
Environmental Operating Conditions.................................................................A-1
Appendix B:Technical Support Services
World Wide Web Server........................................................................................B-1
Internet FTP Server.................................................................................................B-1
Contacting Technical Support............................................................................... B-1
Expediting Technical Support Service.................................................................B-1
Returning Procedures ............................................................................................B-2
Index
Table of Contents
iv MIL-9100X Media Conversion System
T
O
C
MIL-9100X Media Conversion System 1-1
I
N
T
R
O
D
U
C
T
I
O
N
Chapter 1: Introduction
Chapter 1 gives an overall description of the MIL-9100X Media
Conversion System.
1.1 Overview of the MIL-9100X
The MIL-9100X Media Conversion System is an 8-slot rack
mount assembly, that can support up to eight different media
converters, including a “master” (MiLAN’s MIL-4650) or a
“slave” device (MiLAN’s MIL-4655). The master and slave
devices are used to manage the MIL-9100X using SNMP.
The media conversion system can accommodate media
converters that support Ethernet, Fast Ethernet, Gigabit
Ethernet, ATM or a combination of all these technologies. The
MIL-9100X is “hot-swappable,” meaning you can remove and
replace media converters without powering down the device.
1.1.1
Features
The MIL-9100X offer the following features:
• Fits into a 19" rack in a 1U size slot
• One on-board power supply, with second bay for one
additional hot swappable, load balancing, redundant
power supply
• Diagnostic LEDs indicating power supply status
1.2 Media Converters
The MIL-9100X supports a variety of MiLAN designed
devices. Refer to the device’s install guide for configuration
and installation information for each device.
Introduction
1-2 MIL-9100X Media Conversion System
I
N
T
R
O
D
U
C
T
I
O
N
Currently, MiLAN Technology’s conversion modules
supported include (but not limited to):
• MIL-140TRM: Multi-mode media converter; 10BASE-FL to
10BASE-T,
• MIL-160TRM: Single-mode media converter; 10BASE-FL to
10BASE-T
• MIL-170TRM: Single-mode media converter, 10BASE-FL to
10BASE-T
• MIL-180CRM/180TRM: Multi-mode media converter;
100BASE-TX to 100BASE-FX
• MIL-190CRM: Single-mode media converter; 100BASE-TX
to 100BASE-FX,
• MIL-240TRM: Media converter; featuring three 100BASE-
TX ports
• MIL-1225LSRM: Media converter, 1000BASE-LX to
1000BASE-SX
• MIL-1240LSRM: Media converter; 1000BASE to 1000BASE
• MIL-4650: Master SNMP agent, 10BASE-T/100BASE-TX
• MIL-4655: Slave SNMP Agent
Contact MiLAN sales at (800) 466-4526 for more information
on all of these devices.
MIL-9100X Media Conversion System 2-1
I
N
S
T
A
L
L
A
T
I
O
N
Chapter 2: Installation
Chapter 2 gives installation information for a MIL-9100X
Media Converter System.
2.1 Installation Requirements
Before installing the MIL-9100X, make sure you have the
following:
• MIL-9100X Media Converter System
• Power supply (two if necessary)
• Two, right-angle bracket assemblies
• Eight, 440
×
1/4 phillips-head screws
• Power cord
• Standard, Phillips screwdriver (not included)
Figure 2-1. MIL-9100X, with a no Media Converters Installed
2.2 Installing a MIL-9100X
To install a MIL-9100X Media Conversion System:
1. Install the two bracket assemblies to each side of the unit:
Line up the bracket holes to the holes on the chassis. Use
the phillips head screws (supplied) to secure the brackets.
Chapter 2
2-2 MIL-9100X Media Conversion System
I
N
S
T
A
L
L
A
T
I
O
N
2.Install the MIL-9100X into a 1U size slot on a rack. Use the
phillips head screws (supplied) to secure the device.
Note:
For safety reasons, MiLAN recommends that two people install the MIL-9100X. One person should hold the
unit, while the other secures the MIL-9100X. Also, excessive charring of the unit will damage internal
components and void the warranty.
3.Add the extra power supply (if necessary).
4.Populate the bays with media converters and/or SNMP
agents. Refer to the device’s documentation for installation
instructions.
5.Plug in the power cord (or cords) into unit and then to the
appropriate power supply.
Power 1
and/or
Power 2
LEDs illuminate.
The device is ready for network connections.
2.3Installing a Second Power Supply
1.At the rear of the print server, remove the screws securing
the faceplate and remove it from the chassis.
2.Slide the module into the bay through the guide rails.
3.Insert the module into the card-edge connector. Make sure
it is seated firmly.
4.Secure the module with the two screws located on the
faceplate of the unit.
MIL-9100X Media Conversion System A-1
S
P
E
C
I
F
I
C
A
T
I
O
N
S
Appendix A: Specifications
A.1 Diagnostic LEDs
Table A-1 describes the status of the unit when an LED lights:
A.2 Hardware Features
Hardware features for the MIL-9100X series:
• Enclosure: Two-part aluminum alloy housing (black)
• Rack mount: 1U size
• Supports half- and full-duplex modes of operation (see the
specific media converter’s documentation)
• Power supply: 110/220 VAC with an IEC connector, or a
-48 VDC with a Telco connector.
A.3 Environmental Operating Conditions
Table A-1: Diagnostic LEDs
LED Function Color
Power 1 System power is applied to the unit
from the first power supply
Green
Power 2 System power is applied to the unit
from the second power supply
Green
Table A-2: Recommended Operation Conditions
Parameters Minimum Maximum
Operating Temperature +5° C 40° C
Humidity: Non-condensing 10% 95%
Altitude test Sea level 40,000 ft. (at 40° C)
Temperature test (Operating) 5° C 50° C
Temperature test (Packaged) -25 ° C 70° C
Appendix A
A-2 MIL-9100X Media Conversion System
S
P
E
C
I
F
I
C
A
T
I
O
N
S
MIL-9100X Media Conversion System B-1
T
E
C
H
S
U
P
P
O
R
T
Appendix B: Technical Support Services
B.1 World Wide Web Server
Product information, manuals, new product announcements,
programs, applications stories and more can be obtained
through the world wide web. Our address is:
http://www.milan.com
B.2 Internet FTP Server
MiLAN has set up an anonymous FTP server for those with
access to the internet. The address is
ftp.milan.com
.
Drivers and installation tips are located in the
/pub/
MCSys
directory.
Note:
To ensure binary transfer of files, switch to binary mode by entering bin or binary before downloading.
B.3 Contacting Technical Support
To contact MiLAN Technology Technical Support:
• By Phone: 1.408.744.2751
• By Fax: 1.408.744.2771
• By email: [email protected]
B.4 Expediting Technical Support Service
For faster service when calling our technical support
department:
• Be in a position where the computer and the Media
Conversion System are accessible
• Know the type and versions of software you are using
• Know your hardware specification, including memory and
Appendix B
B-2 9100X Media Conversion System
T
E
C
H
S
U
P
P
O
R
T
disk space
• Note any and all error messages
• Be specific about the problem(s)
B.5 RMA Procedures
To return a unit to MiLAN for repair:
1. Call technical support at 408/744-2751
2. Technical support engineers will work with users to find
the problem. If technical support determines that the unit is
defective, a return materials authorization (RMA) will be
issued by our RMA administrator who will also provide
shipping instructions.
Note:
It is required that any return has an RMA number, or it will be rejected and returned to the sender.
Index
MIL-9100X Media Conversion System I-1
I
N
D
E
X
Index
Numerics
110/220 VAC A-1
1U slot 1-1, 2-2, A-1
206.40.59.2 B-1
-48 VDC A-1
8-slot rack assembly 1-1
A
ATM 1-1
B
Bracket assembly 2-1
D
MiLAN sales
(800) 466-4526 1-2
E
Ethernet 1-1
F
Fast Ethernet 1-1
Features 1-1
ftp.milan.com B-1
Full-duplex A-1
G
Gigabit Ethernet 1-1
H
Half-duplex A-1
Hardware features A-1
Hot-swappable 1-1
http
//www.milan.com B-1
I
Installation Requirements 2-1
Installation requirements 2-1
Installing a MIL-9100X 2-1
Internet access B-1
Internet FTP server B-1
L
LEDs 1-1, 2-2, A-1
M
Media converters 2-2
MIL-1225LSRM 1-2
MIL-1240LSRM 1-2
MIL-140TRM 1-2
MIL-160TRM 1-2
MIL-170TRM 1-2
MIL-180CRM 1-2
MIL-180TRM 1-2
MIL-190CRM 1-2
MIL-240TRM 1-2
MIL-4650 1-1, 1-2
MIL-4655 1-1, 1-2
MIL-9100X 1-1, 2-1, 2-2
Features 1-1
Overview 1-1
O
Operating conditions A-1
P
Power cord 2-1
Power supply
Index
I-2 MIL-9100X Media Conversion System
I
N
D
E
X
Auto-switching 2-1
R
Return materials authorization
(RMA) B-2
S
Safety tip 2-2
Second power supply
Installation 2-2
SNMP agent 1-1, 1-2, 2-2
Specifications A-1
T
Technical support B-1
W
World wide web server B-1
MiLAN TECHNOLOGY
1329 Moffett Park Drive
Sunnyvale, CA 94089
Part Number: 90000081 Rev. C Printed in the USA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

MiLAN MIL-4650 User manual

MiLAN
Brand
MiLAN
Model
MIL-4650
Category
Network media converters
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents