2. Intermec
  3. PB42

Intermec PB42, 74964 Supplementary Manual

  • Hello! I am an AI chatbot trained to assist you with the Intermec PB42 Supplementary Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PB42 Belt Clip Instructions
The PB42 belt clip (P/N 074964) makes it easy for you to attach
the PB42 printer to your belt. The belt clip kit contains this
instruction sheet and these parts:
• Belt clip
• Belt clip base
• Torx screws (2)
To install the belt clip
1 Attach the belt clip base to the back of the PB42 with the two
Torx screws.
Belt clip
base
Screw
(2 places)
2 Attach the belt clip to your belt.
Belt clip
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2005 Intermec Technologies
Corporation. All rights reserved.
PB42 Belt Clip Instructions
*943-047-001*
P/N 943-047-001
3 Rotate the printer 90° to align the opening in the belt clip base
with the tab on the belt clip.
4 Insert the printer into the belt clip and let it rotate back to its
natural vertical position.
/