Meru Networks AP1010E Datasheet

Brand: Meru Networks

Model: AP1010E

Category: WLAN access points

Type: Datasheet

This manual is also suitable for

Meru Networks AP1010E

The Meru Networks AP1010E is a dual-band, selectable single-radio 802.11a/b/g/n access point with two external RPSMA antenna connectors. It includes two dual-band rubber duck antennas. The AP1010E is designed for a broad range of general purpose uses, including classrooms, dormitories, and branch offices.

The AP1010E offers a choice between internal and external antenna models. The internal antenna model has two integrated dual-band omnidirectional antennas with typical gain of 4.0 dBi for 2.4 GHz and 5.0 dBi for 5 GHz.

Meru Networks AP1010E

AP1020e

For more information, visit www.merunetworks.com

The AP1010 and AP1020 are 802.11a/b/g/n enterprise

wireless access points with a 2x2:2 MIMO design. The

AP1010 features a single radio and operates on either

the 2.4 GHz or 5 GHz band to deliver a maximum data

rate of 300 Mbps. The AP1020 features dual radios

and operates on the 2.4 GHz and 5 GHz bands to

deliver a maximum data rate of 300 Mbps per radio.

Both access points oer a choice between internal

and external antenna models.

The AP1010 and AP1020 simultaneously support

data, voice, and video applications with superior

reliability and predictability in moderate-density

environments. They are designed for a broad range

of general purpose uses, including classrooms,

dormitories, and branch oces.

Radio frequency virtualization delivers plug-and-play

deployment, easy capacity expansion, and seamless

mobility. Multiple operating modes give you the

ﬂexibility to design a wireless network suited to your

speciﬁc needs. The access points support centralized,

distributed and mesh modes.

As key elements of Meru’s Virtualized Wireless LAN

solution, the AP1010 and AP1020 Wi-Fi access points

deliver a superior end-user experience. As with other

Meru access points, they integrate seamlessly with

the System Director wireless operating system and

the Meru E(z)RF

network management suite to bring

intelligent management and resilient wireless services

to your network.

Dual-stream 802.11n Wireless Access Points

General purpose, enterprise-class wireless LAN performance

Features Beneﬁts

• 802.11a/b/g/n enterprise wireless connectivity

• Radio frequency virtualization

• Choice of single- or dual-radio models, each with

internal or external antennas

• Multiple operating modes: centralized, distributed

and mesh modes

• Integration with Meru System Director operating

system

• Supports resource-intensive applications in

moderate-density environments

• Simpliﬁes deployment and delivers seamless

mobility

• Lets you select from a range of options to suit

your needs

• Oers ﬂexible deployment options for diverse uses

• Delivers wireless connectivity with superior

reliability and predictability

AP1010 and AP1020

AP1020i

Regulatory Approval

FCC

EU R&TTE Directive 1995/5/EC

RS-210

ICES-003

VCCI

ARIB-STD33 & STD66

For more country-speciﬁc regulatory

approvals, please contact your Meru

representative.

Certiﬁcations

Wi-Fi certiﬁed 802.11a/b/g/n

RoHS Compliant

WEEE Compliant

REACH Compliant

UL2043 Compliant (AP1010e and

AP1020e only)

Warranty

Limited lifetime warranty

Part Numbers

AP1010i

Dual-band, selectable single-radio

802.11a/b/g/n access point; includes

integrated dual-band antennas

AP1010e

Dual-band, selectable single-radio

802.11a/b/g/n access point with two

external RPSMA antenna connectors;

includes two dual-band rubber duck

antennas

AP1020i

Dual-band, concurrent dual-radio

802.11a/b/g/n access point; includes

integrated dual-band antennas

AP1020e

Dual-band, concurrent dual-radio

802.11a/b/g/n access point with four

external RPSMA antenna connectors;

includes four dual-band rubber duck

antennas

QoS

WMM support

Dynamic WMM rate adaptation

Conﬁgurable QoS rules per user and application

OPERATING MODES

Centralized deployment mode

Distributed deployment mode

Mesh mode

SECURITY

WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-

TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5)

802.1X and captive portal authentication against local database on the

controller, RADIUS, and Active Directory

RADIUS-assisted per-user and per-ESSID access control via MAC ﬁltering

MANAGEMENT

Centrally managed by any Meru controller running System Director

Automatically discovers controllers and downloads conﬁguration settings

for plug-and-play deployment

Upgrades and management using System Director/E(z)RF

Network

Manager

Support for SNMP

WIRELESS SPECIFICATIONS

Radio Technologies

AP1010: Single-radio, selectable dual-band 802.11n indoor access point;

2x2 MIMO with two spatial streams; supports both 20 MHz and 40 MHz

channel widths

AP1020: Dual-radio, concurrent dual-band 802.11n indoor access point;

2x2 MIMO with two spatial streams; supports both 20 MHz and 40 MHz

channel widths

Supported radio technologies:

802.11b: Direct-sequence spread-spectrum (DSSS)

802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)

802.11n: 2x2 MIMO with two spatial streams

Modulation

Supported modulation types:

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

Frequency Band

Supported frequency bands:

2.400–2.485 GHz

5.150–5.250 GHz

5.250–5.350 GHz

5.470–5.725 GHz

5.725–5.875 GHz

Country-speciﬁc restrictions apply; adjusted by controller upon approval

Platform supports Dynamic Frequency Selection (DFS)

Operating Channels

2.4 GHz channels: 1 to 11 for U.S. & Canada, 1 to 13 for Europe, 1 to 13 for Japan

5 GHz channels: 36 through 165

Country-speciﬁc restrictions apply; adjusted by controller upon approval

Platform supports Dynamic Frequency Selection (DFS) for ﬂexible 5 GHz

channel adoption

Data Rate

Data rates supported (Mbps):

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11b: 1, 2, 5.5, 11

802.11n: 6.5–300 (MCS0 to MCS15)

Transmit Power and Receive Sensitivity (Internal Antenna Model)

Maximum

Transmit Power

(EIRP)

Receive

Sensitivity at

Lowest Data Rate

IEEE 802.11b 23 dBm -83 dBm

IEEE 802.11g 20 dBm -83 dBm

IEEE 802.11a 19 dBm -86 dBm

2.4GHz IEEE 802.11n (HT20) 19 dBm -83 dBm

2.4GHz IEEE 802.11n (HT40) 19 dBm -83 dBm

5GHz IEEE 802.11n (HT20) 17 dBm -86 dBm

5GHz IEEE 802.11n (HT40) 16 dBm -83 dBm

Transmit Power and Receive Sensitivity (External Antenna Model)

Maximum

Transmit Power

(EIRP)

Receive

Sensitivity at

Lowest Data Rate

IEEE 802.11b 22 dBm -82 dBm

IEEE 802.11g 19 dBm -82 dBm

IEEE 802.11a 17 dBm -84 dBm

2.4GHz IEEE 802.11n (HT20) 18 dBm -82 dBm

2.4GHz IEEE 802.11n (HT40) 18 dBm -82 dBm

5GHz IEEE 802.11n (HT20) 15 dBm -84 dBm

5GHz IEEE 802.11n (HT40) 14 dBm -81 dBm

Conﬁgurable Transmission Power

Transmission power conﬁgurable in 1.0 dBm increments

PHYSICAL SPECIFICATIONS

Antenna

AP1010i: Two integrated dual-band omnidirectional antennas with typical

gain of 4.0 dBi for 2.4 GHz and 5.0 dBi for 5 GHz

AP1010e: Two extended reverse polarity SMA connectors. Ships with two

omnidirectional rubber duck antennas with typical gain of 2.0 dBi for 2.4

GHz and 3.0 dBi for 5 GHz. Other external antenna options are available.

AP1020i: Four integrated dual-band omnidirectional antennas with typical

gain of 4.0 dBi for 2.4 GHz and 5.0 dBi for 5 GHz

AP1020e: Four extended reverse polarity SMA connectors. Ships with four

omnidirectional rubber duck antennas with typical gain of 2.0 dBi for 2.4

GHz and 3.0 dBi for 5 GHz. Other external antenna options are available.

Power

802.3af PoE and 802.3at PoE

5V external power adapter (sold separately)

Interfaces

One 10/100/1000 BASE-T Ethernet (RJ45), auto-sensing link speed and

MDI/MDX, with 802.3af PoE

One RJ45 console

One USB 2.0 port (Type-A connector)

One built-in Kensington security slot (included in AP1010e and AP1020e)

AP1010e: Two reverse polarity SMA connectors

AP1020e: Four reverse polarity SMA connectors

Indicators

Two status LEDs (on front cover) for power, Ethernet activity, and

wireless activity

Mounting

Wall or ceiling mount

Access point includes:

Mount over 15/16” T-bar (no tools required)

Lockable wall-mount kit (included in AP1010e and AP1020e)

Lock key to lock the access point to a ceiling (for AP1010i and AP1020i)

Other mounting kits sold separately:

MNT-SCRMKIT-03, mounting adapter for recessed ceiling or narrow

T-bars (5-pc package)

MNT-SCRMKIT-04, mounting adapter for Interlude/Silhouette T-bars

(5-pc package)

MNT-WMKIT-01, optional lockable wall-mount kit for AP1010i and

AP1020i (5-pc package)

Dimensions

AP1010i: 6.75” x 6.50” x 2.50” (17.10 cm x 17.10 cm x 5.70 cm)

AP1010e: 6.33” x 4.50” x 1.50” (16.10 cm x 11.40 cm x 3.80 cm)

AP1020i: 6.75” x 6.50” x 2.50” (17.10 cm x 17.10 cm x 5.70 cm)

AP1020e: 6.50” x 4.50” x 1.50” (16.10 cm x 11.40 cm x 3.80 cm)

Weight

AP1010i: 0.95 lb (0.44 kg)

AP1010e: 1.08 lb (0.49 kg)

AP1020i: 1.01 lb (0.46 kg)

AP1020e: 1.12 lb (0.51 kg)

Environmental

Operating temperature: 32˚F to 122˚F (0˚C to 50˚C)

Operating humidity: 5–95% (non-condensing)

Storage temperature: -40˚F to 185˚F (-40˚C to 70˚C) ambient

Storage humidity: 5–95% (non-condensing)

AP1010 and AP1020

TECHNICAL SPECIFICATIONS

AP1010 and AP1020

Antenna Radiation Patterns (Internal Antenna Model)

Corporate Headquarters

894 Ross Drive, Sunnyvale, CA 94089

T +1 (408) 215-5300

F +1 (408) 215-5301

E [email protected]

Meru delivers an all-wireless network

that fully supports the enterprise,

delivering a consistent, interactive

experience for all users. No matter

what applications they are running. No

matter how many other users are on

the network.

2.4 GHz E-plane

5 GHz E-plane

2.4 GHz H-plane

5 GHz H-plane

For more information, visit www.merunetworks.com or email your questions to: meru[email protected]

trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. Meru Networks assumes no responsibility for any

inaccuracies in this document. Meru Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. 02.13 DS1008.12 US