Intermec 1-092515-90 User manual

Brand: Intermec

Model: 1-092515-90

Category: Printer/scanner spare parts

Type: User manual

This manual is also suitable for

Spare Parts Catalog

EasyCoder C4

Bar Code Label

Printer

Intermec Printer AB

Idrottsvägen 10

P.O. Box 123

S-431 22 Mölndal

Sweden

Service support: +46 31 869500

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and speciﬁ cations in this manual are subject to change without notice.

EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trademarks of Intermec

Technologies Corp. The word Intermec, the Intermec logo, InterDriver, and PrintSet are trademarks

of Intermec Technologies Corp.

The name Centronics is wholly owned by GENICOM Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark (™)

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the beneﬁ t of the trademark owner, with no intention of infringement.

Intermec EasyCoder C4 — Spare Parts Catalog iii Intermec EasyCoder C4 — Spare Parts Catalog iii

Preface

Contents

Introduction

Spare Parts Policy ..................................................................................................................2

General View ........................................................................................................................3

Spare Parts

Bottom Cover........................................................................................................................6

Main Board...........................................................................................................................7

Base Frame............................................................................................................................8

Platen Roller .........................................................................................................................9

Peel-Off Mechanism ...........................................................................................................10

Motor Kit ...........................................................................................................................11

Media Guide Kit.................................................................................................................12

Base Lock Kit......................................................................................................................13

Sensor Kit ...........................................................................................................................14

Media Spindle.....................................................................................................................15

Printhead Kit ......................................................................................................................16

Print Frame (Direct Thermal) .............................................................................................17

Print Frame (Thermal Transfer)...........................................................................................18

Lock Kits ............................................................................................................................19

Top Cover...........................................................................................................................20

Power Supply ......................................................................................................................21

Memory Cartridge ..............................................................................................................22

Cutter ................................................................................................................................23

Miscellaneous......................................................................................................................24

iv Intermec EasyCoder C4 — Spare Parts Catalog iv Intermec EasyCoder C4 — Spare Parts Catalog

Preface

Intermec EasyCoder C4 — Spare Parts Catalog 1

This chapter contains the Intermec Spare Parts Policy regarding printers

and provides an overview of the EasyCoder C4 with options.

Introduction

2 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 1 — Introduction

Spare Parts Policy

This Spare Parts Catalog contains information on items presently available

as spare parts and accessories for the Intermec EasyCoder C4 printer

model.

You will notice that, as a rule, we supply only assembled spare parts.

Our policy is based on the conviction that this is a more rational way of

stocking spares and supplying adequate service as well.

For further information about parts not listed in this volume, please

contact our Spare Parts Sales Department.

Information in this manual is subject to change without prior notice and

does not represent a commitment on the part of Intermec.

Note: For updated information, please refer to the latest edition of the

Spare Parts Price List.

Intermec EasyCoder C4 — Spare Parts Catalog 3

Chapter 1 — Introduction

EasyCoder C4, General View

Pos. Description Remarks

1 Top Cover See page 20

2 Print Frame (DT & TT) See pages 17-19

3 Media Spindle See page 15

4 Base Frame See pages 8, 11-14

5 Platen Roller See page 7

6 Peel-Off Mechanism See page 10

7 Bottom Cover See page 6

8 Printhead Kit See page 16

– Main Board See page 7

– Power Supply See page 21

– Memory Cartridge (option) See page 22

– Cutter (option) See page 23

– Miscellaneous See page 24

4 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 1 — Introduction

Intermec EasyCoder C4 — Spare Parts Catalog 5

Spare Parts

This chapter shows the various spare parts and lists their part numbers. The

text in the description ﬁ eld is selected to help understanding the purpose

of the part and is not necessarily the same as the text on drawings, packinf

slips, and invoices.

6 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 2 — Spare Parts

Bottom Cover

Pos. Part No. Description Remarks

1 1-092201-90 Bottom Cover assy Includes 1 bottom case, 1 accessory cover, 4

rubber feet, and 4 taps.

Intermec EasyCoder C4 — Spare Parts Catalog 7

Chapter 2 — Spare Parts

Main Board

Pos. Part No. Description Remarks

1 1-971689-90 Main Board assy Simpliﬁ ed drawing. Requires ESim v4.00

or later.

8 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 2 — Spare Parts

Pos. Part No. Description Remarks

1 1-092101-91 Base Frame assy. Incl. peel-off bar and memory blind plate

2 1-092220-00 Memory Blind Plate

3 1-092234-90 Peel-Off Bar assy. Incl. ESD spring

4 1-092212-90 Platen Roller assy. See page 9

5 1-092109-90 Motor Kit See page 11

6 1-092107-90 Base Lock Kit See page 13

7 1-092215-90 Media Guide Kit See page 12

Base Frame

Intermec EasyCoder C4 — Spare Parts Catalog 9

Chapter 2 — Spare Parts

Platen Roller

Pos. Part No. Description Remarks

1 1-092212-90 Platen Roller assy. Includes platen, 2 bushings, platen cover,

and gear.

10 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 2 — Spare Parts

Peel-Oﬀ Mechanism

Pos. Part No. Description Remarks

1 1-092104-90 Peel-Off Mechanism assy Complete unit incl. sensor.

Intermec EasyCoder C4 — Spare Parts Catalog 11

Chapter 2 — Spare Parts

Motor Kit

Pos. Part No. Description Remarks

1 1-092109-90 Motor Kit 203.2 dpi (8 dots/mm) printhead Includes 1 stepper motor assy with bracket,

thermistor, and cables, 2 gears, 1 washer, 2

E-rings, and 2 self-locking nuts

1 1-092120-90 Motor Kit 300 dpi (11.81 dots/mm)

printhead

Includes 1 stepper motor assy with bracket,

thermistor, and cables, 2 gears, 1 washer, 2

E-rings, and 2 self-locking nuts

12 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 2 — Spare Parts

Media Guide Kit

Pos. Part No. Description Remarks

1 1-092215-90 Media Guide Kit Includes 2 label stoppers, 2 label guides, 1

worm rod, 1 gear, 1 label adjust knob, and

3 screws.

Intermec EasyCoder C4 — Spare Parts Catalog 13

Chapter 2 — Spare Parts

Base Lock Kit

Pos. Part No. Description Remarks

1 1-092107-90 Base Lock Kit Including all parts illustrated above.

14 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 2 — Spare Parts

Sensor Kits

Feed Switch

Ribbon Sensor

Label Gap Sensor Black Mark Sensor

Feed SwitchLabel Gap Sensor Black Mark Sensor

Pos. Part No. Description Remarks

1 1-092085-91 Sensor Kit (direct thermal model) Including 3 printhead cables

2 1-092085-96 Sensor Kit (thermal transfer model) Including 3 printhead cables and 1 ribbon

load instruction label

Intermec EasyCoder C4 — Spare Parts Catalog 15

Chapter 2 — Spare Parts

Media Spindle

Pos. Part No. Description Remarks

1 1-092204-90 Media Spindle

16 Intermec EasyCoder C4 — Spare Parts Catalog

Chapter 2 — Spare Parts

Printhead Kit

Pos. Part No. Description Remarks

1 1-092106-90 Printhead Kit assy. 203.2 dpi (8 dots/mm) Includes printhead, bracket, printhead

cover, V-blade, GND terminal, and screws

1 1-092121-90 Printhead Kit assy. 300 dpi (11.81 dots/mm) Includes printhead, bracket, printhead

cover, V-blade, GND terminal, and screws

2 1-092266-90 V-blade (standard)

2 1-092266-95 V-blade for thick media Red paint marking

Page is loading ...

Intermec 1-092515-90 User manual

Brand: Intermec

Model: 1-092515-90

Category: Printer/scanner spare parts

Type: User manual

This manual is also suitable for

Download PDF

report

Intermec 1-092515-90 User manual

This manual is also suitable for

Intermec 1-092515-90 User manual

Related papers

Other documents