Intermec 1-092104-90 User manual

Category
Printer/scanner spare parts
Type
User manual

This manual is also suitable for

Spare Parts Catalog
EasyCoder C4
Bar Code Label
Printer
Intermec Printer AB
Idrottsvägen 10
P.O. Box 123
S-431 22 Mölndal
Sweden
Service support: +46 31 869500
The information contained herein is proprietary and is provided solely for the purpose of allowing
customers to operate and/or service Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission of Intermec.
Information and specifi cations in this manual are subject to change without notice.
© 2003 by Intermec Printer AB
All Rights Reserved
EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trademarks of Intermec
Technologies Corp. The word Intermec, the Intermec logo, InterDriver, and PrintSet are trademarks
of Intermec Technologies Corp.
The name Centronics is wholly owned by GENICOM Corporation.
Throughout this manual, trademarked names may be used. Rather than put a trademark (™)
symbol in every occurrence of a trademarked name, we state that we are using the names only in an
editorial fashion, and to the benefi t of the trademark owner, with no intention of infringement.
Intermec EasyCoder C4 — Spare Parts Catalog iii Intermec EasyCoder C4 — Spare Parts Catalog iii
Preface
Contents
1
Introduction
Spare Parts Policy ..................................................................................................................2
General View ........................................................................................................................3
2
Spare Parts
Bottom Cover........................................................................................................................6
Main Board...........................................................................................................................7
Base Frame............................................................................................................................8
Platen Roller .........................................................................................................................9
Peel-Off Mechanism ...........................................................................................................10
Motor Kit ...........................................................................................................................11
Media Guide Kit.................................................................................................................12
Base Lock Kit......................................................................................................................13
Sensor Kit ...........................................................................................................................14
Media Spindle.....................................................................................................................15
Printhead Kit ......................................................................................................................16
Print Frame (Direct Thermal) .............................................................................................17
Print Frame (Thermal Transfer)...........................................................................................18
Lock Kits ............................................................................................................................19
Top Cover...........................................................................................................................20
Power Supply ......................................................................................................................21
Memory Cartridge ..............................................................................................................22
Cutter ................................................................................................................................23
Miscellaneous......................................................................................................................24
iv Intermec EasyCoder C4 — Spare Parts Catalog iv Intermec EasyCoder C4 — Spare Parts Catalog
Preface
Intermec EasyCoder C4 — Spare Parts Catalog 1
This chapter contains the Intermec Spare Parts Policy regarding printers
and provides an overview of the EasyCoder C4 with options.
1
Introduction
2 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 1 — Introduction
Spare Parts Policy
This Spare Parts Catalog contains information on items presently available
as spare parts and accessories for the Intermec EasyCoder C4 printer
model.
You will notice that, as a rule, we supply only assembled spare parts.
Our policy is based on the conviction that this is a more rational way of
stocking spares and supplying adequate service as well.
For further information about parts not listed in this volume, please
contact our Spare Parts Sales Department.
Information in this manual is subject to change without prior notice and
does not represent a commitment on the part of Intermec.
Note: For updated information, please refer to the latest edition of the
Spare Parts Price List.
Intermec EasyCoder C4 — Spare Parts Catalog 3
Chapter 1 — Introduction
1
EasyCoder C4, General View
3
6
4
8
7
2
Pos. Description Remarks
1 Top Cover See page 20
2 Print Frame (DT & TT) See pages 17-19
3 Media Spindle See page 15
4 Base Frame See pages 8, 11-14
5 Platen Roller See page 7
6 Peel-Off Mechanism See page 10
7 Bottom Cover See page 6
8 Printhead Kit See page 16
Main Board See page 7
Power Supply See page 21
Memory Cartridge (option) See page 22
Cutter (option) See page 23
Miscellaneous See page 24
5
4 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 1 — Introduction
Intermec EasyCoder C4 — Spare Parts Catalog 5
2
Spare Parts
This chapter shows the various spare parts and lists their part numbers. The
text in the description fi eld is selected to help understanding the purpose
of the part and is not necessarily the same as the text on drawings, packinf
slips, and invoices.
6 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 2 — Spare Parts
Bottom Cover
1
Pos. Part No. Description Remarks
1 1-092201-90 Bottom Cover assy Includes 1 bottom case, 1 accessory cover, 4
rubber feet, and 4 taps.
Intermec EasyCoder C4 — Spare Parts Catalog 7
Chapter 2 — Spare Parts
Main Board
1
Pos. Part No. Description Remarks
1 1-971689-90 Main Board assy Simplifi ed drawing. Requires ESim v4.00
or later.
8 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 2 — Spare Parts
Pos. Part No. Description Remarks
1 1-092101-91 Base Frame assy. Incl. peel-off bar and memory blind plate
2 1-092220-00 Memory Blind Plate
3 1-092234-90 Peel-Off Bar assy. Incl. ESD spring
4 1-092212-90 Platen Roller assy. See page 9
5 1-092109-90 Motor Kit See page 11
6 1-092107-90 Base Lock Kit See page 13
7 1-092215-90 Media Guide Kit See page 12
Base Frame
1
2
3
4
5
6
7
Intermec EasyCoder C4 — Spare Parts Catalog 9
Chapter 2 — Spare Parts
Platen Roller
1
Pos. Part No. Description Remarks
1 1-092212-90 Platen Roller assy. Includes platen, 2 bushings, platen cover,
and gear.
10 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 2 — Spare Parts
Peel-O Mechanism
1
Pos. Part No. Description Remarks
1 1-092104-90 Peel-Off Mechanism assy Complete unit incl. sensor.
Intermec EasyCoder C4 — Spare Parts Catalog 11
Chapter 2 — Spare Parts
Motor Kit
1
Pos. Part No. Description Remarks
1 1-092109-90 Motor Kit 203.2 dpi (8 dots/mm) printhead Includes 1 stepper motor assy with bracket,
thermistor, and cables, 2 gears, 1 washer, 2
E-rings, and 2 self-locking nuts
1 1-092120-90 Motor Kit 300 dpi (11.81 dots/mm)
printhead
Includes 1 stepper motor assy with bracket,
thermistor, and cables, 2 gears, 1 washer, 2
E-rings, and 2 self-locking nuts
12 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 2 — Spare Parts
Media Guide Kit
1
Pos. Part No. Description Remarks
1 1-092215-90 Media Guide Kit Includes 2 label stoppers, 2 label guides, 1
worm rod, 1 gear, 1 label adjust knob, and
3 screws.
Intermec EasyCoder C4 — Spare Parts Catalog 13
Chapter 2 — Spare Parts
Base Lock Kit
1
Pos. Part No. Description Remarks
1 1-092107-90 Base Lock Kit Including all parts illustrated above.
14 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 2 — Spare Parts
Sensor Kits
1
2
Feed Switch
Ribbon Sensor
Label Gap Sensor Black Mark Sensor
Feed SwitchLabel Gap Sensor Black Mark Sensor
Pos. Part No. Description Remarks
1 1-092085-91 Sensor Kit (direct thermal model) Including 3 printhead cables
2 1-092085-96 Sensor Kit (thermal transfer model) Including 3 printhead cables and 1 ribbon
load instruction label
Intermec EasyCoder C4 — Spare Parts Catalog 15
Chapter 2 — Spare Parts
Media Spindle
1
Pos. Part No. Description Remarks
1 1-092204-90 Media Spindle
16 Intermec EasyCoder C4 — Spare Parts Catalog
Chapter 2 — Spare Parts
Printhead Kit
1
Pos. Part No. Description Remarks
1 1-092106-90 Printhead Kit assy. 203.2 dpi (8 dots/mm) Includes printhead, bracket, printhead
cover, V-blade, GND terminal, and screws
1 1-092121-90 Printhead Kit assy. 300 dpi (11.81 dots/mm) Includes printhead, bracket, printhead
cover, V-blade, GND terminal, and screws
2 1-092266-90 V-blade (standard)
2 1-092266-95 V-blade for thick media Red paint marking
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Intermec 1-092104-90 User manual

Category
Printer/scanner spare parts
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI