2. YSI
  3. EXO GO

YSI EXO GO Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the YSI EXO GO Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
EXO GO
Quick Start Guide
Monitoring Made Mobile
EXO GO is a rugged, compact device that allows for
wireless communicaon between an EXO Sonde and a PC
or tablet running KorEXO Soware for sampling, proling,
and monitoring applicaons.
This document assists the user with quick setup and use
of EXO GO. Consult the EXO User Manual for more details.
Your shipment contains the following:
Remove the equipment from the shipping box.
Check the packaging carefully to ensure that all
components are present and undamaged.
Unpacking and Inspecon
EXO GO
YSI.com/EXOGO
#577400
If the EXO GO or any of the accessories are
damaged or if a part is missing, please contact:
info@ysi.com or +1 937-767-7241
For use with
EXO Sondes
TM
TM
• EXO GO
• Micro USB cable
• AC power supply
• USB ash drive
Boom view: micro
USB connector with
rubber cap open.
The EXO GO uses a built-in, rechargeable lithium-ion
baery which must be charged before rst use. The
recommended charge period is at least 9 hours.
Plug the USB cable into the AC power adapter, computer
USB connector or external USB baery pack, and then
plug the micro USB connector into the EXO GO to charge
the baery.
Charging EXO GO
YSI.com
item# 577420REF dwg# 577420
December 2019 Rev C
1725 Brannum Lane
Yellow Springs, OH 45387
(800) 765-4974, (937) 767-7241
[email protected]
Open the latest version of KorEXO Soware and
SCAN FOR BLUETOOTH DEVICES.
Click CONNECT when the EXO GO appears in the
Instrument Connecon Panel.
*EXO Sondes may also appear; be sure to select the EXO GO.
The blue COMM LED will blink when the connecon
has been established.
To adjust EXO GO sengs, click the INSTRUMENT
AND SENSORS tab in KorEXO Soware.
Under Device Status, select the EXO GO to:
• Set EXO GO ID
• Adjust the date/me
• Turn on/o GPS
• Disable or set Auto Shuto
Click APPLY SENSOR SETTING to save any changes.
The EXO GO will provide Barometric Pressure and
GPS readings in the LIVE DATA tab.
*GPS x can only be achieved with a clear view of the sky.
All soware funcons are now available for
interfacing with the submerged sonde.
YSI.com
EXO
Sonde
EXO
GO
KorEXO
Use a eld cable to connect an EXO Sonde to the
EXO GO. Aach the male end of the eld cable to
the EXO GO and screw down the retaining collar.
The front panel of EXO GO features 4 LED indicators:
BLUE LED – Bluetooth status
Solid: On, not linked
Blinking: On, linked
GREEN LED – 100 to 50% charge
YELOW LED – 50 to 25% charge
RED LED – less than 25% charge
Solid: On, not charging
Blinking: On, charging
Press the yellow power buon to turn
on the device. Press and hold the power
buon for 1.5 seconds to power o.
EXO GO will power the sonde and allow Bluetooth
access from any device running KorEXO Soware.
Syncing up with KorEXO Soware EXO GO Sengs and Features
EXO GO SetupLED Descripons
For more informaon on KorEXO
Soware, visit: YSI.com/KorEXO
/