VKI3010ZWA

Inventum VKI3010ZWA User manual

  • Hello! I am an AI chatbot trained to assist you with the Inventum VKI3010ZWA User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
inductie kookplaat
VKI3010ZWA
gebruiksaanwijzing
instruction manual
Gebrauchsanweisung
mode d'emploi
INDUCTION HOB
INDUKTIONSKOCHFELD
TABLE DE CUISSON À INDUCTION
3
1. Veiligheidsvoorschriften pagina 4
2. Productomschrijving pagina 7
3. Voor het eerste gebruik pagina 8
4. Bediening van de kookplaat pagina 8
5. Pannen voor inductie pagina 9
6. Reiniging & onderhoud pagina 9
7. Installatievoorschrift pagina 10
8. Storingen en oplossingen pagina 10
Algemene service- en garantievoorwaarden pagina 36
1. Safety instructions page 12
2. Appliance description page 15
3. Before first use page 16
4. Operation of the appliance page 16
5. Cookware for induction page 17
6. Cleaning & maintenance page 17
7. Installation instructions page 18
8. Problems & solutions page 18
General terms and conditions of service and warranty page 37
Nederlands
English
1. Sicherheitsvorschriften Seite 20
2. Produktbeschreibung Seite 23
3. Vor dem ersten Gebrauch Seite 24
4. Bedienung des Kochfelds Seite 24
5. Für Induktionskochfelder geeignete Töpfe und Pfannen Seite 25
6. Reinigung & Wartung Seite 25
7. Installationsvorschrift Seite 26
8. Störungen & Lösungen Seite 26
Allgemeine Service- und Garantiebedingungen Seite 38
1. Consignes de sécurité page 28
2. Description du produit page 31
3. Avant la toute première utilisation page 32
4. Commande de la table de cuisson page 32
5. Ustensiles de cuisson pour l’induction page 33
6. Nettoyage & entretien page 33
7. Instructions d’installation page 34
8. Pannes et solutions page 34
Conditions générales de garantie et de après-vente page 39
Deutsch
Français
Please read these instructions before operating the appliance
and retain for future use.
• The appliance is intended solely for domestic use within the
home. The hob is only to be used for the preparation of food. The
appliance is not designed for heating rooms.
WARNING: this appliance and the accessible parts will
become hot during use. Do not touch hot parts. Keep children
younger than 8 away from the appliance unless they are under
continuous supervision.
• This appliance can be used by children aged 8 years and over, as well
as by people with reduced physical, sensory or mental capabilities
or lack or experience and knowledge, provided they are supervised
and instructed in the safe use of the appliance and understand the
hazards involved.
• Children must not play with the appliance.
• Cleaning and maintenance shall not be made by children.
• Do not keep objects that children might find interesting in
cupboards above or behind the appliance.
• The cooking zones heat up during use and stay hot for a while
afterwards. Keep young children away from the hob during and
immediately after cooking.
• The manufacturer cannot be held liable for any damage resulting
from failure to follow the safety instructions and warnings.
• Never open the casing of the appliance.
• Do not warm closed tins on the hob. There will be a build-up of
pressure that will cause tins to explode. You might get injured or
scalded.
WARNING
:
danger of fire: never leave anything unsupervised
on the hob.
WARNING
:
cooking with fat or oil on a hob without supervision
can be dangerous and can lead to fire. NEVER try to extinguish
a fire with water. Instead, switch the appliance off and then
cover the flames with for example a lid or a fire blanket.
• The appliance should not be placed or used outdoors.
• Do not use the appliance as a worktop. The appliance may
accidentally be switched on or still be hot or catch fire.
English
safety instructions
1
12 English
• Never cover the appliance with a cloth or something similar. If the
appliance is still hot or is switched on, there is a risk of fire.
• Never use a pressure cleaner or steam cleaner to clean the hob.
• Do not use the appliance in temperatures below 5°C.
• When you use the hob for the first time you will notice a “new smell”.
Don’t worry, this is normal. If the kitchen is well ventilated, the smell
will soon disappear.
WARNING
:
in case of hotplate glass breakage:
- shut immediately off any electrical heating element and
isolate the appliance from the power supply;
- do not touch the appliance surface;
- do not use the appliance.
• The appliance is not intended to be operated by means of an
external timer or separate remote control system.
• Do not place metal objects such as knives, forks, spoons and lids on
the surface of the hob, they may become hot.
• The ceramic top is extremely strong, but not unbreakable. For
example, a spice jar or sharp utensil falling on it could cause it to
break.
WARNING
:
if the surface is cracked, switch off the appliance to
reduce the risk of electric shock.
• Remember that if the hob is used on a high setting the heating time
will be very short. Do not leave the hob unattended if you are using a
zone on a high setting.
• Faulty parts may only be replaced by original parts meet safety
requirements.
• Damage caused by incorrect connection or incorrect use is not
covered by the warranty.
• If the connecting cable is damaged, it may only be replaced
by the manufacturer, the manufacturer’s service organisation
or equivalently qualified persons, in order to avoid dangerous
situations.
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• The connection cable must hang freely and should not be fed
through a drawer.
• The worktop onto which the hob is fitted, should be flat.
• The walls and the worktop surrounding the appliance must be heat
resistant up to at least 100°C. Even though the appliance itself does
not get hot, the heat of a hot pan could discolour or deform the wall.
English 13
Legislation requires that all electrical and electronic equipment
must be collected for reuse and recycling. Electrical and
electronic equipment marked with the symbol indicating
separate collection of such equipment must be returned to a
municipal waste collection point.
14 English
appliance description
2
Hob
1. Cooking zone (Ø 170 mm)
2. Cooking zone (Ø 140 mm)
3. Control panel
Control panel
4. Indicator light for power
5. Display - indicates power/ temperature/timer
6. Indicator light for timer
7. Indicator light - Ø 14 cm cooking zone
8. ON / STANDBY key
9. MENU key
10. Indicator light for temperature
11. Control key [ + and - ]
12. Indicator light - Ø 17 cm cooking zone
1
2
3
English 15
4
45 56 6
7
8
9
10
11
11
12
8
9
10
before first use
3
Before using the induction cooker for the first time, proceed as follows: Unpack the induction cooker and remove all packaging
material. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking the appliance, check it for
external damage that may have occurred during transport. If still present, remove the protective film from the glass plate. Clean
the glass ceramic plate with a moist cloth. Check that the voltage stated on the information plate matches the voltage used in your
region.
For the installation of the cooker you must observe the instructions in section 7.
operation of the appliance
4
Only use pans that are suitable for an induction cooker and have the correct size with a cross-section from 15 to 20 cm.
The induction cooker works by means of electronic sensors that are operated by touching the touch control and/or control key. At
each touch of a touch control or control key, you can hear a sound signal. Make sure the operating section is always clean and dry.
Even a thin layer of water could prevent the keys from being operated.
Check that the ventilation openings are not blocked and do not place cookware in the direct vicinity of the induction
cooker.
Place a pan with food or liquid in the centre of a cooking zone.
Insert the plug in the socket and a beep will sound. The indicator lights of both cooking zones flash on the display. The induction
cooker is now in standby position. As long as the induction cooker is in standby position, the indicator lights continue to flash.
Press the [ ON/STANDBY ] key to select the required cooking zone.
Press the [ MENU ] key to activate the required cooking zone. The cooking zone is ready for heating. The indicator light for
power lights up and the power is shown on the display.
Turn the control key to the left [ - ] or right [ + ] to set the required power.
Press the [ MENU ] key to change from power display to temperature display and vice versa. The indicator light for temperature
lights up and the temperature is shown on the display.
If there is no pan on the cooking zone after switching on, the induction cooker will not get hot. The error message [ E0 ] appears
on the display and an alarm signal sounds to indicate that no pan has been placed. One minute later, the induction cooker
switches off automatically.
Cooking zone - Ø 17 cm Cooking zone - Ø 14 cm
Number of positions 10 10
Power range 200 - 1600 watts 200 - 1300 watts
Temperature range 60 - 240°C 60 - 240°C
SETTING THE TIMER
Press the [ MENU ] key of the required cooking zone twice to set the timer. [ 0:00 ] flashes on the display. The indicator light
of the timer of the required cooking zone lights up. Turn the control key to the right [ + ] or left [ - ] to adjust the time. The timer
can be set from 1 minute to 3 hours.
Once the time has been set, it will flash a number of times and then start to count down. The display will alternate between the
time and the temperature/power position.
When the set time has passed, a beep sounds and the cooking zone switches off automatically. On the display you can see a
flashing [ OFF ] and the indicator light of the cooking zone flashes.
The induction cooker switches off automatically after the maximum cooking time (3 hours) has passed, if you did not
set a time yourself.
SWITCHING OFF THE INDUCTION COOKER
When the maximum cooking time or set time has passed, the induction cooker switches off automatically.
Press the [ ON/STANDBY ] key to switch off the induction cooker manually.
Caution: the glass in the cooking zone area will be too hot to touch.
After switch-off, the internal ventilation continues to run for approximately 1 more minute in order to cool the cooker.
Remove the plug from the socket if you will not be using the cooker for a longer period of time.
16 English
pans for induction
5
cleaning and maintenance
6
Prior to cleaning, always remove the plug from the wall socket. Allow cooking zones to cool down before cleaning the induction
cooker.
When cleaning the surface of the induction cooker, do not use aggressive abrasive cleaning agents, spray cans or sharp
objects that have not been developed for this purpose.
After a period of time, the ventilation openings can become clogged due to the accumulation of dust and other dirt. Clean the
ventilation openings with a soft, dry cloth. If necessary, use a soft brush or a mini vacuum cleaner.
Caution: Do not rinse the induction cooker with water.
Daily clean the surface of the induction cooker with a moist cloth and a mild cleaning agent, such as a washing-up liquid. Dry
properly with paper towels or a dry tea towel.
Some pans can leave a metal-like substance on the glass plate. Remove it immediately after use, because it will get increasingly
more difficult to remove. If necessary, use a moist cloth with a little bit of toothpaste or some washing-up liquid.
If the induction cooker is not used for a longer period of time, remove the plug from the socket and store the appliance in a
room that is free from dust and vermin.
Boiled over food can be removed by soaking it with a moist cloth and a little bit of washing-up liquid, or you can use a glass
scraper. Caution: the glass scraper is sharp. Keep it away from children.
Use a special cleaning agent for ceramic/induction cookers in case of stubborn stains. Caution: observe the instructions on
the packaging.
Pans that have been used on another cooker previously, such as a gas cooker, are no longer suitable for an induction cooker.
Therefore, buy new pans prior to first use, if you do not have a suitable pan.
Which requirements should a good pan meet? The pan should contain materials that are magnetic. Cookware made of steel,
enamelled steel, cast iron or stainless steel yields the best results.
Use pans with a thick, flat bottom with the same diameter as a
cooking zone. This reduces cooking time.
The pans must have a flat bottom and a minimum diameter of 15
cm and maximum diameter of 20 cm. The cooking zone is a circle
with the crossing of the lines as the centre of the circle.
After first use, white stains are sometimes found in the pan. This is normal. Pour some vinegar in the pan and heat it to 60-
80°C. Then remove the stains with a brush.
Unsuitable materials for pans are: glass, ceramic, aluminium, copper and other non-magnetic materials.
When the pan is removed from the cooking zone, the induction cooker immediately stops heating. For a period of 1 minute, a
sound signal can be heard, after which the induction cooker switches off automatically.
A pan should always be placed in the centre of a cooking zone.
In the case of some pans, it is possible that you can hear different noises. This is caused by the shape of the pan and does not
affect the function or safety of the induction cooker.
ENERGY SAVING
Place the pan on the cooking zone before it is switched on. If you switch on a cooking zone without a pan on top of it, the
cooking zone will do nothing.
Always use a lid on the pan to reduce cooking time.
Reduce the power when the liquid is boiling.
Do not use too much moisture or fat. Cooking or frying takes longer if you use too much.
Select the correct power for the different cooking possibilities.
correct false false
English 17
installation instructions
7
problems & solutions
8
Safety during use is only guaranteed if the assembly has taken place in a technically correct way and in accordance with this
installation instruction. The installer is liable for damage caused by an incorrect assembly.
The manufacturer is not liable for unsuitable operation and possible damage caused by unsuitable electric installations.
The cooker must be connected to a permanent installation in which provisions for switching off are integrated, in accordance
with the installation instructions.
Make sure that the power supply cable does not get jammed during installation or is running along sharp edges. If an oven is
installed below it, make sure the cable runs via the rear corners of the oven to the connection box. It must be placed in such a
way that no contact is made with hot parts of the cooker or oven.
The connection point, socket and/or plug must always be accessible.
The worktop on which the cooker is placed must be flat, horizontal and stable. Observe the instructions from the manufacturer
of the worktop.
In case of incorrect installation or connection, the warranty becomes invalid.
• Attention: any change within the appliance, including replacement of the power supply cable, must be performed by an
authorised installer.
Sufficient space around the cooker is required for safe use. Check that this space is available.
The distance from the cooker to an extraction hood should be at least 650 mm.
ELECTRICAL CONNECTION
Caution: this cooker is always supplied with a cord and plug. The connection is a 1 phase connection.
Check that the voltage corresponds with what is stated on the information plate.
Caution: The connection point should always be within reach.
Problems Checkpoints and solutions
After inserting the plug in the socket and switching
on the induction cooker with the [ ON/STANDBY ]
key, the [ ON/STANDBY ]
indicator on the display does not light up.
• Is the plug properly inserted in the socket?
• Has the socket, fuse or cord been damaged?
The induction cooker makes a lot of noise.
The electronics of the induction cooker require cooling. It is normal for
the fan to make noise.
Error message
E0 No pan or no suitable pan has been placed.
E1 Temperature sensor defective. Contact customer service.
E2 Operating panel defective. Contact customer service.
E3 Voltage too high. Have your connection checked by an electrician.
E4 Voltage too low. Have your connection checked by an electrician.
E5
The operating panel is overheated. Switch off the cooker and wait until
it is cooled down.
E6
The cooker is overheated and switched off automatically. Check the
ventilation openings and allow the cooker to cool down. The induction
cooker will function normally again.
18 English
Technical data VKI3010ZWA
Type of cooker Free-standing induction cooker
Heating technology Induction
Number of cooking zones 2
Diameter top cooking zone (cm) 17
Diameter lower cooking zone (cm) 14
Adjustable power [W] - Ø 17 cm 200-350-500-650-800-1000-1100-1200-1400-1600
Adjustable temperatures [°C] - Ø 17 cm 60-80-100-120-140-160-180-200-220-240
Adjustable power [W] - Ø 14 cm 200-350-500-650-800-900-1000-1100-1200-1300
Adjustable temperatures [°C] - Ø 14 cm 60-80-100-120-140-160-180-200-220-240
The energy consumption of a household electrical cooker is measured in Wh per kg of water, which is heated in a normalised
measurement (Wh/kg), whereby all cookware is rounded to a decimal under standardised testing conditions. Standard EN
60350-2:2013 was used as reference for the measurement and calculation.
English 19
We do not need to remind you of the importance of service. After all, we develop our products to a standard so that you
can enjoy them for many years, without any concerns. If, nevertheless, there is a problem, we believe you are entitled
to a solution straight away. Hence our products come with an exchange service, on top of the rights and claims you are
entitled to by law. By exchanging a product or part, we save you time, effort and costs.
2-year full manufacturer’s warranty
1. Customers enjoy a 2-year full manufacturer’s warranty on all Inventum products. Within this period, a faulty product or part will
always be exchanged for a new model, free of charge. In order to claim under the 2-year full manufacturer’s warranty, you can
either return the product to the shop you bought it from or contact the Inventum costumer service department via the form at
www.inventum.eu/service-aanvraag.
2. The 2-year warranty period starts from the date the product is bought.
3. In order to claim under the warranty, you must produce a copy of the original receipt.
4. The warranty applies only to normal domestic use of Inventum products within the Netherlands.
Breakdowns or faults outside the warranty period
1. Breakdowns or faults in small or large domestic appliances outside the warranty period, can be reported to the costumer
services department via the form at www.inventum.eu/service-aanvraag or by calling the costumer services department.
2. The costumer services department may ask you to send the product for inspection or repair. The costs of dispatch will be at
your expense.
3. The inspection to establish whether repair is possible involves a charge. You need to grant your permission for this, in advance.
4. In the event of a large domestic appliance, Inventum, at your request, can send out a service engineer. In that case, you will be
charged the call-out costs, as well as parts and labour.
5. In the event of an instruction to repair, the repair costs must be paid in advance. In the event of a repair by a service engineer,
the costs of the repair must be settled with the engineer onsite, preferably by means of PIN payment.
Warranty exclusions
1. The following is excluded from the aforesaid warranties:
normal wear and tear;
improper use or misuse;
insufficient maintenance;
failure to comply with the operating and maintenance instructions;
unprofessional installation or repairs by third parties or the customer himself;
non-original parts used by the customer;
use for commercial or business purposes;
removal of the serial number and/or rating label.
2. In addition, the warranty does not apply to normal consumer goods, such as:
dough hooks, baking tins, (carbon) filters, etc.;
batteries, bulbs, carbon filters, fat filters etc.;
external connection cables;
glass accessories and glass parts such as oven doors;
and similar items.
3. Transport damage not caused by Inventum is also excluded. Therefore, inspect your new device before starting to use it.
If you detect any damage, you must report this to the store where you purchased the product within 5 working days, or to
the Inventum customer service department via the form at www.inventum.eu/service-aanvraag. If transport damage is not
reported within this period, Inventum does not accept any liability in this respect.
4. The following are excluded from warranty and/or replacement: faults, loss of and damage to the device as a result of an event
that is normally insured under the home contents insurance.
Important to know
1. The replacement or repair of a faulty product, or a part thereof, does not lead to an extension of the original warranty period.
2. If a complaint is unfounded, all costs arising from it will be at the customer’s expense.
3. Following expiry of the warranty period, all costs of repair or replacement, including administration costs, dispatch and call-out
charges, will be charged to the customer.
4. Inventum cannot be held liable for damage caused by external events, unless this liability arises from mandatory statutory
provisions.
5. These warranty and service provisions are governed by Dutch law. Disputes will be settled exclusively by the competent Dutch
court.
general terms and conditions of service and warranty
English 37
VKI3010ZWA/01.1120V
Wijzigingen en drukfouten voorbehouden/ Änderungen und Druckfehler vorbehalten/
Sous réserve de modification / Modifications and printing errors reserved
Inventum Huishoudelijke
Apparaten B.V.
Postbus 5023
6802 EA Arnhem
www.inventum.eu
facebook.com/inventum1908
youtube.com/inventum1908
persoonlijke verzorgingklein huishoudelijk witgoed inbouwwitgoed vrijstaand
/