B - M4 x 12mm Screws
Phillips
x 20
A - Phillips Screwdriver x 1
CASCADIA
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2016 BDI
6
207 Revision: 0
5-05
-16
Component List
CASCADIA is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
Fo
r mis
sing hardware pieces, please contact BDI Customer Service at customerse[email protected].
For all other concerns, please contact your BDI Retailer.
6207
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM CUSTOMERSERVIC[email protected]
Placement and Maintenance
CASCADIA is desi gned for indoor use on level floors.
C - Cabinet Assembly x 1
D - Swivel Casters x 2
F - Swivel Locking Casters x 2
E - Fixed Caster x 1
C
E
D
B
CASCADIA 6207 Mobile File
F
CASCADIA
6207
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 1
Attach Casters
Place Cabinet upside down on clean carpet.
Attach
Swivel Casters (D) to Cabinet (C) bottom at back corners,
use
Screws (B) and tighten with Phillips Screwdriver (A).
Attach
Fixed Caster (E) to raised block on bottom drawer.
Use
Screws (B) and tighten with Phillips Screwdriver (A).
D
A
E
C
F
F
D
B
Attach swivel locking casters (F) to Cabinet (C) at
fron t corners using Screws (B) and tighten.
-
1
-
2
