REMOTE VEHICLE STARTER OWNER’S GUIDE
Page 3
2nd Channel Output (optional auxiliary output)
Press and release the LOCK button on the remote
transmitter two times within three seconds. The system will
activate an auxiliary output.
NOTE: This feature may be used to activate a remote
starter or activate a power trunk release.
Panic
1. Press and release the LOCK button on the remote
transmitter four times within five seconds. The system will
begin to flash the parking lights and the siren will sound.
2. To disable press and release the UNLOCK button on the
remote transmitter.
System Operation
Passive Arming (optional)
Turn the ignition to the “OFF” position and exit the vehicle.
Upon closing the last door the LED will begin flashing
rapidly to confirm the system is passively arming. After 30
seconds the siren will chirp and the parking lights will flash
once to confirm the system has passively armed.
NOTE: If installed the optional starter kill feature will be
activated and if the optional locks are installed the
system will lock the doors.
Domelight Supervision (optional feature)
Upon disarming the system will activate the interior lights for
30 seconds to illuminate the interior of the vehicle.