2. Kestrel
  3. CLR 2 Screen Material
CLR 2 Screen Material

Kestrel CLR 2 Screen Material Installation guide

  • I have read the provided installation tip for the EliteProjector Screens CLR 2 screen material. This document details the proper installation for optimal performance, especially regarding ambient light rejection for ultra and short throw projectors. The material also features an anti-scratch film for use as a dry-erase whiteboard; I'm ready to answer your questions about this product.
  • What type of projectors is the CLR 2 screen material compatible with?
    What is the ambient light rejection rate of the CLR 2 screen material?
    Does the CLR 2 screen material have any additional features?
The CLR® 2 is exclusively for table-mounted ultra/short throw projectors as illustrated in the Example diagram below.
Please use the following installation instructions to obtain superior optical performance from the
Retro-Reflective ALR (Ambient Light Rejecting) Screen.
Notice To Installer: Please use the following installation instructions to obtain superior optical performance from
EliteProjector Screens innovative CLR® 2 (Ceiling Light Rejecting) screen materials.
Images are not up to scale and are for illustration purposes only.
Example: Proper Projector Installation
Reective Light
Anti-Scratch lm layer for
Dry-Erase Whiteboard feature
0.23 - 1.2 Throw Ratio
Projected Light
Short-Throw ProjectorUltra Short-Throw Projector
CLR® 2
Screen
Ceiling/Overhead Light
How the CLR® 2 Screen Material Performs and Rejects Ambient Light
90% Ambient Light Rejection. Compatible with both UST and Short-Throw Projectors.
UST reective
layer
Short throw
Reective layer
Light absorbent
layer
CLR® 2 Screen Material
Installation Tip
/