Halcyon T441 Three Circuit Track Mains Adaptor User manual

This document is a user manual for the HALCYON Adapter T441, outlining the installation process with a focus on electrical safety by a qualified electrician. It includes torque specifications, cable preparation, and verification steps and I'm ready to answer user questions.
Who should install this?

What is the torque for the cable?

What should be done after fixing the power cable?

ver:1.0

10MM

6MM

∅8MM

T441

FIG-1

FIG-3 FIG-4

FIG-2

AC 220-240V,6A

MAX50N

Torque﹕

3.5-4kgf.cm

The cable must be crimped.

6MM

√

×

After fixation of the power cable,

please pull the cable with 30N to

check whether they’re fixed

properly, then manually tighten

screws to improve stability.

L(Brown)&N(Blue)& Green/Yellow:

0.5mm²(20AWG)-0.75mm²(18AWG)

Torque﹕

5-5.5kgf.cm

1

Note: Please use the tool to keep the

adapter horizontally in position when

you fixing the power cable.

LN

1

2

3

These must be installed

by a qualified Registered

Electrician to prevent

damage and maintain

electrical safety.

/

Other documents