2. Englefield
  3. 99230A-0S01-DW Valencia Elite Vanity Tops

Englefield 99230A-0S01-DW Valencia Elite Vanity Tops User manual

  • Hello! I've reviewed the installation instructions for the ENGLEFIELD VALENCIA ELITE Vanity Top. This document provides a guide on how to install the vanity top, including steps for fitting the tapware, basin, and sealing the edges. I am ready to answer your questions about the installation process.
  • What should I check for after unpacking the vanity top?
    What type of sealant should be used?
    How do I ensure the water supply and waste do not interfere with drawers?
14797287-A02-A 22/04/2021
INSTALLATION
INSTRUCTIONS
FURNITURE
VALENCIA ELITE VANITY TOPS
TM
NB: Please refer to instructions provided with the vanity cabinet to set up the carcass and drawers.
(a) Unpack the top and check for any damange
that might have occurred in transit. Check
and confirm the fit of your selected basin
and tapware.
(b) Apply a continuous bead of silicone (not
supplied) to the top edges of the cabinet.
Ensure there are no gaps in the bead. This
will ensure the top stays securely fitted to
the cabinet and no water spillage will find
its way into the cabinet.
(c) Place the vanity top onto the cabinet,
ensuring that the polished side is facing up
and the tap hole (if present) is in the correct
position. Check that the back is flush against
the wall and there is an even overhang on
either side of the cabinet. Wipe off any
excess sealant.
(d) Carefully fit the tapware and connect to the
water supply.
(e) Fit the basin and waste, then connect the
waste pipe to the outlet. Ensure that the
water supply and waste assembly do not
interfere with the operation of drawers.
(f) Run hot and cold water and check for leaks.
Make repairs as required.
(g) Seal all edges with silicone sealant:
-Between cabinet and floor
-Between cabinet and wall
-Between vanity top and basin
-Between vanity top and wall(s)
= =
INSTALLATION COMPLETE
/