JasonL BSTB08DPT Operating instructions

Brand
JasonL
Model
BSTB08DPT
Type
Operating instructions

This manual is also suitable for

JasonL BSTB08DPT is a small round meeting table, measuring 700mm in diameter. It is part of the Switch System, which allows for easy assembly and disassembly, making it a great choice for temporary or flexible workspaces.

The table is easy to set up, with only a few simple steps required. First, the leg brackets are attached to the legs, and then the beams are connected to the beam brackets. The hex nuts are then inserted onto the beam brackets, and the L-brackets are attached to the switch beams. Finally, the table top is screwed into place using the L-bracket screws.

JasonL BSTB08DPT is a small round meeting table, measuring 700mm in diameter. It is part of the Switch System, which allows for easy assembly and disassembly, making it a great choice for temporary or flexible workspaces.

The table is easy to set up, with only a few simple steps required. First, the leg brackets are attached to the legs, and then the beams are connected to the beam brackets. The hex nuts are then inserted onto the beam brackets, and the L-brackets are attached to the switch beams. Finally, the table top is screwed into place using the L-bracket screws.

Page 1 of 4
INSTALLATION GUIDE
Switch System
Small Round Meeting Table
Size: 700mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your
particular table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame
is suciently rigid. Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver.
Table Top (700mm D)
Leg x3
Leg Bracket x3
Beam Bracket x6
Switch Beam x3 (180mm)
L-Bracket x6
1
2
3
4
5
6
Hex Nut x3
L-Bracket screws x3
Hex Head screws x9
M8x25mm Dome Head x3
7
8
9
10
COMPONENTS
SCREWS
Page 2 of 4
INSTALLATION GUIDE
Switch System
Small Round Meeting Table
Size: 700mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
5
4
3
6810
1
7
Page 3 of 4
Join 1 L-Bracket through each Switch Beam
Join Leg Brackets to each Leg using screws to secure them, as follow.
Securely connect each Beam to each Beam Bracket. Screw to secure. Insert Hex Nut on each Beam Bracket.
01
03 04
02
INSTALLATION GUIDE
Switch System
Small Round Meeting Table
Size: 700mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 4 of 4
INSTALLATION GUIDE
Switch System
Small Round Meeting Table
Size: 700mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Position as presented, and proceed to screw to ensure each corner of the frame.
05
If this bolt does not drop into the joint
use the Allen key to screw it all the way
in so that it creates its own thread.
This will ensure a nice, tight joint. Directly screw into table tops, using L-Bracket
screws through each L-Bracket.
06
Note: It is important to fully tighten all bolts and screws before attaching
the top(s) so that the frame is suciently rigid. Failure to do this may
aect stability once the tops are attached.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

JasonL BSTB08DPT Operating instructions

Brand
JasonL
Model
BSTB08DPT
Type
Operating instructions
This manual is also suitable for

JasonL BSTB08DPT is a small round meeting table, measuring 700mm in diameter. It is part of the Switch System, which allows for easy assembly and disassembly, making it a great choice for temporary or flexible workspaces.

The table is easy to set up, with only a few simple steps required. First, the leg brackets are attached to the legs, and then the beams are connected to the beam brackets. The hex nuts are then inserted onto the beam brackets, and the L-brackets are attached to the switch beams. Finally, the table top is screwed into place using the L-bracket screws.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers