Gryphon Apex Stereo Operating instructions

Type
Operating instructions

This manual is also suitable for

THE GRYPHON
APEX
POWER AMPLIFIER
UNPACKING AND SET-UP
INSTRUCTIONS
CAUTION - VERY HEAVY!
200+ kg / 441+ Ib
Min. 2 persons for
unpacking and set-up
Please read these instructions first!
2
2035 mm
1190 mm
852 mm
StandArt
amp stand
Placing on StandArt Amp Stand, page 3+4+5
Winbag
Plate
Spikes
Coasters
Placing on the floor, page 3+6+7
POSITIONING OF CRATE FOR DESIRED LOCATION
ACCESSORIES
3
1.
2.
3.
Remove foam with accessories
4.
Remove cover
These instructions
A. Ramp
B. Ramp wedge
UNPACKING
4
1.
Position the pallet with the amp against
the amp-stand front (end with logo).
2.
Wrap the strap around the amp-stand
front legs.
3.
Tighten and secure the strap.
PLACING AMP ON STANDART AMP STAND
5
4.
Roll out the sliding-sheet.
5.
Slide the amp over.
2 persons minimum!
6.
7.
The Apex has landed.
Continue on page 8.
6
1.
Fit the ramp
2.
Secure the ramp
3.
Roll out the sliding-sheet.
2b.
2a.
A.
Ramp
B.
Ramp wedge
PLACING ON FLOOR
7
4.
Slide the amp down.
2 persons minimum.
5.
6.
7.
The Apex has landed.
Continue on page 8.
The sliding-sheet is EXTREMELY smooth!
Do not walk or stand on it.
8
1.
Place winbag and plate below the side of
the amp.
Do not use the winbag without protective plate.
2.
Inflate the winbag.
4A.
Insert spikes (optional).
4B.
Without spikes.
Carefully deflate the winbag.
5. Repeat 1-4 for the other side of the amp.
Position coasters (optional).
Carefully deflate the winbag.
3.
Remove sliding-sheet and shock absorbing feets.
REMOVAL OF TRANSPORT-FEET AND FITTING SPIKES (OPTIONAL)
1+2
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Gryphon Apex Stereo Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI