PRODUCT & CAVITY DIMENSIONS
48" Professional Range
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
INDICATES PRODUCT DATUM -------------------------------------------
0 5 10 20
inches
47 7/8''
B
29 1/8''
35 3/4'' -
36 3/4''
29 1/8''
47 7/8''
B
DATUM : BOTTOM OF CHASSIS
A
FRONT VIEW PROFILE VIEW
C
m
K J I H
GF
l
DATUM :
TOP OF
COUNTERTOP
CABINET FACE FOR INSTALLATION
WITH PROJECTING CONTROL PANEL
CABINET FACE FOR INSTALLATION
WITH FLUSH CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
PROJECTING CONTROL PANEL
CABINET FACE FOR
INSTALLATION WITH
FLUSH CONTROL PANEL
p
Dq
E
C
PLAN VIEW
on
q
r
Model no:
RGV2-485GD-N, RGV2GD-485-L
RDV2-485GD-N, RDV2GD-485-L
Product Dimensions
A Overall height of range (from floor to cooktop,
excludinggrates and vent trim)
B Overall width of range
C Overall depth of range (excluding handle and dials)
D Depth from rear of chassis to cabinetry face - projecting
E Depth from rear of chassis to cabinetry face - flush
F Height from countertop to top of pan supports
G Height from countertop to top of vent trim
H Height from countertop to bottom of control panel
I Height from countertop to top of door
J Height from countertop to center of handle
K Height from countertop to bottom of door
L Height from countertop to bottom of chassis
M Thickness of handles (not including standoffs)
N Width of left handle (including standoffs)
O Width of right handle (including standoffs)
P Depth of handle (measured from front of door)
Q Depth of open door to cabinetry face - flush
R Adjustable feet height
Cavity Dimensions
Overall height of cavity
min 5 /4''
max 6 /4''
Overall width of cavity
Overall depth of cavity for projecting control panel
Overall depth of cavity for flush control panel
max
25 1/8''
max
27 11/16''