Ligouri
06/17/21 - Rev A
Bench
Installation Instructions
TI0062
1) Parts and Fasteners Included
INSTALLATION GUIDE
Bench Frame with Top (1x) Cushion (option)
LNS-1006-x
Leg (4x)
LNL-1002-DB
3/8-16 x 2.25 Flanged Hex
Head Bolt (8x) #8 x 0.75 Pan Head Phillips
Wood Screw
1
2) Tools and Supplies Required
INSTALLATION GUIDE
Socket Wrench 9/16” Socket Level
2
3) Assembly:
INSTALLATION GUIDE
1. Attach the Leg to the Frame Corner Bracket using
the 3/8-16 x 2.25 Flanged Hex Head Bolts.
Note: Fully tighten bolts until snug.
2. For the Cushion option, remove the film on the 6
Dual-Lock pieces and center the cushion onto the
Bench Top. Press firmly until you hear a click.
3. With the Bench flipped in the upright position, level
the Bench using the glides in the bottom of each leg.
Bench
Figure 3.1
Figure 3.2
Figure 3.3
3
4x
CLICK!
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
CYBEX MG 500 Owner's And Service Manual
-
Bowflex Motivator 2 Assembly Manual
-
-
Trojan Ab Cutter 400 Owner's manual
-
HoistFitness H-4500 Owner's manual
-
Hoist Fitness 4600 User manual
-
HoistFitness H-2001 Owner's manual
-
Vectra Fitness 1400 Owner's manual
-
Fitness Quest Brutus 655 User manual
-
Hoist Fitness H-300 User manual
