R9 Bubble Dinosaur Setup
R9 Battery Installation
1.
2.
3.
Use a screwdriver to remove the battery cover.
Replace the battery cover and screw back into place.
1. Open the stopper on the head and pour bubble water with the bottle included in the package.
2. Remove the protective cover from the bottom wheel.
3. Turn on the switch of the dinosaur, the dinosaur will automatically sing, dance and spit bubbles.
(When the switch is in the middle, the dinosaur can only sing and spit bubbles; when the switch
is to the right, the dinosaur can sing, dance and spit bubbles)
Place four AA’s with the corresponding polarities as labeled on the unit.
How to use?