Gevril GV2 Liguria Watch User manual

Liguria Instruction Manual

www.gevril.com

Winding

In position A wind the crown clockwise. Turn it

approximately 30-40 times or until the second hand

starts moving in order to fully wind the watch.

Setting the Date

1.Pull the crown to "B" position.

2.Turn the crown counter-clockwise to set the date.

(If the date is set between the hours of around 9:00 PM and

1:00AM, the date may not change on the following day.)

3.After the date has been set, push the crown back to the normal

position.

Setting the Time

1.Pull the crown to "C" position.

2.Turn the crown to set the hour and minute hands.

Winding

Setting Date (counter-clockwise)