Electro-Voice 801 Installation & Operation Instruction

Type
Installation & Operation Instruction

Electro-Voice 801 is a versatile solid-state amplifier delivering 30 watts of sine wave audio output. Ideal for public address systems with microphones, or for home use with ceramic/crystal phono cartridges, tuners, and auxiliary equipment. Offers speaker outputs for 8 ohms, 25-volt line, and 70-volt line. Features a slide switch to match either low or high impedance microphones.

Electro-Voice 801 is a versatile solid-state amplifier delivering 30 watts of sine wave audio output. Ideal for public address systems with microphones, or for home use with ceramic/crystal phono cartridges, tuners, and auxiliary equipment. Offers speaker outputs for 8 ohms, 25-volt line, and 70-volt line. Features a slide switch to match either low or high impedance microphones.

  • Page 1 1
  • Page 2 2

Electro-Voice 801 Installation & Operation Instruction

Type
Installation & Operation Instruction

Electro-Voice 801 is a versatile solid-state amplifier delivering 30 watts of sine wave audio output. Ideal for public address systems with microphones, or for home use with ceramic/crystal phono cartridges, tuners, and auxiliary equipment. Offers speaker outputs for 8 ohms, 25-volt line, and 70-volt line. Features a slide switch to match either low or high impedance microphones.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI