EGO Power+ HTX6500 Owner's manual

Category
Power hedge trimmers
Type
Owner's manual

This manual is also suitable for

WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
OPERATOR'S MANUAL
56-VOLT
LITHIUM-ION
CORDLESS
HEDGE TRIMMER
MODEL NUMBER HTX6500
Español p. 61
Français p. 31
18-1129_EGO_HTX6500_HedgeTrimmer_manual_NA_V1
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX65002
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions .....................................5-11
Introduction ............................................12
Specications ..........................................12
Packing List ............................................13
Description .........................................14-15
Assembly. .............................................16
Operation ...........................................17-23
Maintenance ........................................24-26
Troubleshooting ......................................27-28
Warranty ...........................................29-30
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR’S MANUAL
WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
 Lead from lead - based paints;
 Crystalline silica from bricks and cement and other masonry products;
 Arsenic and chromium from chemically - treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemical: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX65004
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,
“WARNING, and “CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, re, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May be
used in conjunction with other symbols or pictographs.
WARNING: The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate it.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator’s
Manual
To reduce the risk of injury, user must read
and understand the operator’s manual before
using this product.
Wear Eye
Protection
Always wear safety goggles or safety glasses
with side shields when operating this product.
Danger- Keep
Hands Away
from Blades
Contact with blade will result in serious
personal injury.
Recycle Symbols
This product uses lithium-ion (Li-ion)
batteries. Local, state, or federal laws may
prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for
information regarding available recycling and/
or disposal options.
IPX5
Ingress
Protection
Degree
Protection from water jets.
V Volt Voltage
Direct Current Type or a characteristic of current.
n
0
No-Load Speed Rotational speed, at no load.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX65006
SPM
Strokes Per
Minute
Stroke speed, at no load.
mm Millimeter Length or size.
in. Inch Length or size.
kg Kilogram Weight
lb Pound Weight
GENERAL BATTERY-OPERATED POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions, illustrations and
specications provided with this power tool. Failure to follow all instructions listed
below may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 7
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Always use personal protective equipment. Personal protective equipment
such as eye protection, dust mask, non-skid safety shoes, hard hat and/or hearing
protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to the battery pack, picking up or carrying the tool. Carrying power
tools with your nger on the switch or energizing power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a moving part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause severe
injury within a fraction of a second.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX65008
Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
Remove the battery pack, if detachable, from the power tool and/or activate
any battery disabling device before clearing jammed material, making any
adjustments, changing accessories, cleaning, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces may lead to unsafe handling and/or loss of
control of the tool.
Keep cables away from the working area of the tool. During operation cables
may be hidden from view and can be accidentally damaged by the tool.
BATTERY TOOL USE AND CARE
Recharge only with the charger specied by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of re when used with
another battery pack.
Use power tools only with specically designated battery packs. Use of any
other battery packs may create a risk of injury and re.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 9
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a re.
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, ush with water. If liquid contact
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
Do not use a battery pack or tool that is damaged or modied. Damaged or
modied batteries may exhibit unpredictable behavior resulting in re, explosion or
risk of injury.
Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 212 °F (100°C) may cause explosion.
Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specied in the instructions. Charging
improperly or at temperatures outside the specied range may damage the battery
and increase the risk of re.
SERVICE
Have your power tool serviced by a qualied repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
SAFETY INSTRUCTIONS FOR HEDGE TRIMMER
DANGER - Keep hands away from blade. Contact with blade will result in serious
personal injury.
Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. Blades coast after turn off.
A moment of inattention while operating the hedge trimmer may result in serious
personal injury.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX650010
Carry the hedge trimmer by the handle with the cutter blade stopped. When
transporting or storing the hedge trimmer always t the cutting device cover.
Proper handling of the hedge trimmer will reduce possible personal injury from the
cutter blades.
Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring. Cutter blades contacting a “live” wire may
make exposed metal parts of the power tool “live” and could give the operator an
electric shock.
Keep cable away from cutting area. During operating the cable may be hidden in
shrubs and can be accidentally cut by the blade.
Use both hands when operating the hedge trimmer. Using one hand could cause
loss of control and result in serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
If the hedge trimmer should start to vibrate abnormally or become noisy, stop
the motor and check immediately for the cause. Abnormal noise is generally a
warning of trouble.
Replace the blade if it is bent or cracked. An unbalanced blade causes vibration
that could damage the motor drive unit or cause personal injury.
Keep all fasteners tight to be sure the hedge trimmer is in safe
working condition.
Make sure all proper guards and other safety devices are properly and
securely attached before using this product.
Do not charge the battery pack in rain, or in wet locations.
Use only with the battery pack and charger listed below.
BATTERY CHARGER
BAX1501 CHX5500
Do not dispose of the battery in a re. The cells may explode. Check with local
codes for possible special disposal instructions.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 11
Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
Battery tools do not have to be plugged into an electrical outlet; therefore,
they are always in operating condition. Be aware of possible hazards even when
the tool is not operating. Take care when performing maintenance or service.
Do not wash with a hose; avoid getting water in motor and electrical
connections.
If situations occur that are not covered in this manual, use care and good
judgment. Contact the EGO Customer Service Center for assistance.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX650012
INTRODUCTION
Congratulations on your selection of the new 56V Lithium-ion powered hedge trimmer.
It has been designed, engineered and manufactured to give you the best possible
dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation, and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE
SPECIFICATIONS
Voltage
56 V
No-Load Speed (n
0
) 3600 SPM
Blade Length 25.5 in. (650 mm)
Cutting Capacity 1-1/4 in. (33 mm)
Operating Temperature 32°F - 104°F (0°C - 40°C)
Storage Temperature -4°F - 158° F (-20°C - 70°C)
Net Weight (including the blade sheath) 8.82 lbs. (4.0 kg)
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 13
PACKING LIST
PART NAME QUANTITY
Hedge Trimmer 1
Blade Sheath 1
Hex Wrench 1
Operator's Manual 1
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX650014
DESCRIPTION
KNOW YOUR HEDGE TRIMMER (Fig. 1)
The safe use of this product requires an understanding of the information on the
tool and in this operator’s manual, as well as knowledge of the project you are
attempting. Before using this product, familiarize yourself with all operating features
and safety rules.
Rear Handle
Electric Socket
Hand Guard
Blade Guard
Blade
Blade Sheath
Hex Wrench
Tip Protector
Front Handle
Front Switch Lever
Lock-off Switch
Rear Switch Lever
Hook
1
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 15
HAND GUARD
Helps to protect the operator’s hands; deects chips or other debris away from
the operator.
FRONT HANDLE
For easy control of the tool.
REAR HANDLE
Ergonomic handle with overmold improves comfort and grip.
FRONT/REAR SWITCH LEVER
The hedge trimmer can be switched on immediately by pressing the front and rear
switch levers simultaneously.
LOCK-OFF SWITCH
Prevents accidental or unauthorized activation of the switch lever. It must be adjusted
to the "ON" position before the switch levers can be activated.
BLADE
Standard steel blades for cutting hedges and shrubs. Model No. AHB6500S
BLADE SHEATH
The blade sheath helps to prevent damage to the blades during transport and helps to
protects you from being cut by the blades when the tool is not in use.
TIP PROTECTOR
Helps to protect walls and fences around the hedgerow from being scratched
during cutting.
ELECTRIC SOCKET
Directly plug-in the battery plug.
HOOK
Manages the power cord away from cutting by the blade during operation.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX650016
ASSEMBLY
WARNING: If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or modication is misuse
and could result in a hazardous condition leading to possibly serious personal injury.
WARNING: Always wear heavy gloves when doing any maintenance on the
blade. Be careful of the blade and protect your hands from being injured by the blade.
WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the power cord from the product when assembling parts, making
adjustments, cleaning, or when not in use.
UNPACKING
 This product has been shipped completely assembled.
 Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
 Inspect the product carefully to make sure that no breakage or damage occurred
during shipping.
 Do not discard the packing material until you have carefully inspected and
satisfactorily operated the product.
 If any parts are damaged or missing, please return the product to the place of
purchase.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 17
OPERATION
WARNING: Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufcient to inict serious injury.
WARNING: Always wear eye protection that is marked to comply with ANSI
Z87.1. Failure to do so could result in objects being thrown into your eyes and other
possible serious injuries.
WARNING: Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the power cord from the product before servicing, cleaning,
changing attachments or removing material from the unit.
Before each use, inspect the entire product for damaged, missing, or loose parts
such as screws, nuts, bolts, etc. Securely tighten all fasteners and do not operate this
product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for the purpose listed below:
 Trimming hedges, shrubs, and bushes with branch diameters less than 1-1/4
in. (33 mm).
CONNECTING WITH/DISCONNECTING FROM THE BATTERY
NOTE:
Fully charge the battery pack before rst use.
This hedge trimmer has a dedicated plug-in connection. Please use it with EGO
BAX1501 backpack battery or with EGO portable batteries via backpack link.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX650018
To Connect with the Battery
1. Align the " " marks on the battery
plug with the hedge trimmer 's electric
socket, then insert the plug into the
hedge trimmer until the GREEN sealing
on the plug COMPLETELY disappears
into the socket (Fig. 2 & 3).
2. Mount the power cord into the
hook (Fig. 4).
Power Cord
3
4
2
GREEN
Sealing
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 19
To Disconnect from the Battery
Release the power cord from the hook
and then grasp the plug and pull it from
the socket (Fig. 5).
5
1
2
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX650020
HOLDING THE HEDGE TRIMMER
(Fig. 6 & 7 & 8)
The switch lever in the front handle can
be activated while grasping it on any of
the three sides, giving you many choices
for a comfortable grip when performing
cutting operations.
WARNING:
Always hold the hedge
trimmer with both hands. Never hold
shrubs with one hand while operating
the hedge trimmer with the other hand.
Failure to heed this warning may result in
serious injury.
STARTING/STOPPING THE
HEDGE TRIMMER
Before starting the hedge trimmer:
 Make sure that you have secure and
balanced footing.
 Stand upright and hold the hedge
trimmer in a relaxed position.
 Remove the blade sheath.
 Make sure the cutting blade is not
touching the ground or any
other objects.
 Hold the unit with both hands: one
hand on the rear handle and one
hand on the front handle.
8
6
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

EGO Power+ HTX6500 Owner's manual

Category
Power hedge trimmers
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI