English / Español
Use & Care Guide
Manual de Uso y Cuidado
Tower Heater
Calentador de Torre
Kenmore ®
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
Customer Assistance / Asistencia al Cliente
1-866-877-1889
Model/Modelo: 127.96012610
P/N CZ499RSRMAN
KENMORE LIMITED WARRANTY
FOR ONE YEAR from the date of sale this product is warranted against defects in material
or workmanship.
WITH PROOF OF SALE, return a defective product to the retailer from which it was purchased
for free replacement.
This warranty is void if this product is ever used for other than private household purposes.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
GARANTÍA LIMITADA DE KENMORE
DURANTE UN AÑO desde la fecha de venta, este producto está garantizado contra defectos
de materiales o mano de obra.
CON EL COMPROBANTE DE VENTA, devuelva un producto defectuoso a la tienda donde fue
comprado para un reemplazo gratis.
Esta garantía queda anulada si el producto se utiliza para otros propósitos que no sean para
hogares privados.
Esta garantía le otorga derechos legales específicos, y también puede tener otros derechos
que varían de estado a estado.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
3
Please read this guide. It will help you to operate your new Kenmore Heater in the
safest and most effective way.
Keep this book and your sales check (receipt) in a safe place for future reference.
2
TABLE OF CONTENTS
BEFORE USING YOUR NEW HEATER
Before Using Your Tower Heater..............................................................................................2
Important Safety Instructions..............................................................................................2 - 4
Parts and Features........................................................................................................................5
Operating Instructions..............................................................................................................6-7
Care and Maintenance................................................................................................................8
Warranty......................................................................................................................Back Cover
IMPORTANT SAFETY INSTRUCTIONS
7. Always unplug the heater when not in use.
8. Do not operate heater with blade guards or any safety device remove.
9. Do not run power cord under carpeting. Do not cover cord with throw rugs,
runners or the like. Arrange cord away from traffic area where it will not be
tripped over.
10. Avoid the use of extension cords due to risk of fire. If an extension cord must
be used, the cord must be a minimum 14AWG and rated not less than 1875 watts.
11. Do not insert or allow any object to enter any openings on the heater. Doing so
may cause electric shock and/or fire hazard.
12. This product is intended for indoor residential, office and personal shop use only,
not for industrial or other commercial applications. This warranty is void if
this product is ever used for other than private household purposes.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions in this guide before using your Heater.
This product is intended for indoor residential, office and personal shop use only,
not for industrial or other commercial applications. Use only with electrical wiring
that is in good working order and that meets applicable codes and ordinances.
If you have any questions whether your wiring is adequate, consult a qualified
electrician.
While using your Heater, you should follow the IMPORTANT
SAFETY INSTRUCTIONS listed below. As part of those instructions, we have
used the word ” “ to indicate the level of hazard:
indicates a hazard which, if not avoided, could result in injury
or death.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Read all instructions before using this Heater.
2. Use this heater only as described in this manual. Any other use not recommended
by the manufacturer may cause electrical shock, fire, or injury to persons.
3. Do not operate the heater with a damaged power cord or after the heater
malfunctions or has been dropped in any manner.
4. Do not use heater unattended. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
5. Do not place the heater on a small, unlevel, uneven or any surface which might
allow Heater to tip or fall.
6. For proper operation, the heater should be placed on a smooth, non combustible
surface.
WARNING
WARNING:
SAVE THESE INSTRUCTIONS!
Use your heater only in dry environments. This heater is not intended for use in a
bathroom, laundry area, or similar locations, or near sinks, washing machines,
swimming pools or other sources of water. Never locate heater where it may fall
into a bathtub or other water container. Do not use heater outdoors. Do not use in
damp environments such as flooded basements.
WARNING: SHOCK HAZARD
Do not touch body of heater when in use. This heater is hot when in use, to avoid
burns, do not let bare skin touch hot surfaces. If provided, use handles when
moving this heater.
WARNING: HOT SURFACES
Heater has hot and arcing or sparking parts inside. Do not use near combustible
materials or flammable gases or sources of heat. DO NOT USE in areas where
gasoline, paint or flammable materials are used or stored. Keep combustible
materials such as furniture, pillows, bedding, papers, clothes and curtains at least
3 feet (0.9 m) from the front of the heater and keep them away from the sides
and rear. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may become
blocked. Do not place the heater near a bed because objects such as pillows or
blankets can fall off the bed and be ignited by the heater. Do not insert or allow
foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock, fire, or damage the heater.
WARNING: FIRE HAZARD
5
4
IMPORTANT SAFETY INSTRUCTIONS
Do not use with damaged cord or plug. Use with adequate electrical system that
is up to code. The supply cord has a polarized plug. As a safety feature this plug
will fit in a polarized outlet only one way. To prevent electric shock, match wide
blade of plug to wide slot, fully insert plug. If the plug does not fit contact a
qualified electrician. Never use an extension cord. DO NOT attempt to defeat
this safety feature. Do not operate any heater with a damaged cord or plug or
after heater malfunctions, has been dropped or damaged in any manner. Do not
operate heater with a broken heating element or ceramic cone or any visual
imperfections. For all repairs contact a qualified service dealer.
Do not operate heater with its ventilation obstructed.
WARNING: ELECTRICAL SHOCK HAZARD
PARTS AND FEATURES
It is important to know your heater’s parts and features to ensure its
proper and safe use. Review these before using your heater.
TOWER HEATER
SAVE THESE INSTRUCTIONS!
Fig. 2
Fig. 1
Fig. 3
Control Panel
Heat Vent
Base
Remote Control Storage
Air Inlet Grill
Handle
Main Power
Switch
DO NOT COVER
Kenmore
Kenmore
OPERATING INSTRUCTIONS
Always operate the heater in the upright position following all instructions and
recommendations listed in this manual.
HEATER LOCATION
Place the heater in the area of the room that is coldest.
HEATER CONNECTION
outlet. A loose connection may cause overheating and damage to the plug or heater.
NOTE: To prevent overloading a circuit, do not plug the heater into a circuit that
is servicing other electrical needs.
HEATER OPERATION
OPERATING INSTRUCTIONS
OSCILLATING FUNCTION
The Oscillating function will work in any mode.
1. Press the button to oscillate the heater fan from left to right across a 90
degree arc. The indicator symbol will display on the heater control panel.
button again.
The Timer function will work in any mode. The Timer function allows you to set the
length of operation from 1 to 8 hours. Each time the button is pressed the length
of operation will increase 1 hour. The duration the timer is set for will be displayed
on the LED screen in hour increments. TO TURN THE TIMER FUNCTION
the E
TIMER FUNCTION
1.
may the desired temperature setting in any heater operation mode.
The temperature can be set from
to
2.
Press the or button to
the temperature setting.
The heater will operate in HEAT mode and blow warm air when the set
temperature is
higher than the room temperature.
The heater will operate in HIGH HEAT mode and blow hot air when the set
temperature is more than
higher than the room temperature.
When the room temperature reaches the set temperature the heater will
automatically go into FAN
and blow unheated air.
The heater will cycle between FAN and HEAT as it
maintains the set temperature.
TEMPERATURE SETTING
The heater must cool down and be reset before it will
On. Press the (l) button on the control panel to resume normal operation. sure that
the heater is on a surface with no obstructions. The heater is also
ped with a safety switch to turn power off to the heater when the
heater tips To resume heater functions simply stand heater upright. With tip
protection, the heater will only operate when placed upright on a surface.
SAFETY FEATURES
REMOTE CONTROL
The remote control uses one button cell battery, type
the remote. See Fig. 4. We recommend the use of a battery for longer
use.
Follow battery disposal instruction on battery , or contact your
local safety council for safely disposal of batteries.
using the remote
Fig. 4
control, you must
the insulating film as shown
in the figure below.
1.
All functions performed
identically to the heater
control panel.
Aim the remote control at
the heater control panel to operate the heater.
The heater may be operated by the controls located on the heater (see Fig.
) or by
the remote control (see Fig. .
1. Carefully remove the heater/fan from the plastic bag and the carton.
surface.
3.
Power On the unit by switching on the
Power Switch (Fig.1). The control
then show the current room temperature.
.
automatically when sufficiently cooled down.
4.
Turn the heater ON by pressing the button on the control panel or remote
control.
5
6
.
Regardless of the difference between room temperature and heater setting, you
HIGH or FAN mode.
PULL
Remote control
Insulating film
Battery carriage
Release Tab
9
8
CARE AND MAINTENANCE
NOTES
The heater comes with an air filter located beneath the air inlet grill on the back of the
heater. Periodically remove the grill and look at the filter to see if it is dirty. Remove a
dirty filter from the heater. In most cases brush debris from filter surface and replace
in heater. If filter is very dirty, rinse it out with warm water. Be sure to allow the filter to
dry completely before replacing in heater.
The heater should be cleaned at least once a year to maintain proper performance.
Clean the outside surface with a damp cloth. Allow heater to dry completely before
use. Do not use harsh chemical or abrasive cleaners.
WARNING: To prevent personal injury or heater malfunction, NEVER immerse the
heater in water.
Do not attempt to open the heater to clean or otherwise service the inside. If the heater
does not function normally, call the following customer assistance number to arrange
for possible heater service and repair: 1-866-877-1889
Keep original carton for storage of the heater. Coil and tie the power cord to avoid
damage during storage.
Before cleaning the heater be sure to disconnect power cord and allow
the heater to cool completely.
CLEANING
CAUTION:
CAUTION: Do not operate the heater without the air filter grill in place. Do not
use the heater if it has malfunctioned or become damaged in any way.
REPAIR
STORAGE
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
