allFENZ BF48100175 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the allFENZ BF48100175 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ROBINSON
TECH
INTERNATIONAL
CORPORATION
310 Fairfield Road
Fairfield, NJ 07004
Tel: (973) 287-6458
Fax: (973) 287-6465
SAFETY FENCE INSTRUCTIONS
PLACE 1 FENCE POSTS NO MORE THAN 8 FT APART FROM EACH
OTHER
DRIVE POSTS IN APPROXIMATELY 1.5 FT DEEP USING A MALLET
LINE UP FENCE ON POSTS BY STRETCHING THEM ACORSS POSTS
AND ATTACHING THEM WITH TIES.
TIGHTEN FENCE AND SECURE WITH CABLE TIES TO POST, MAKE
SURE TO USE AT LEAST 3-5 TIES TO SECURE THE FENCE.
NOTE: IN HIGH WIND AREAS, IT IS HIGHLY RECOMMENDED THAT THE
FENCE BE TIED BETWEEN THE FLAT SIDE OF THE METALS POSTS AND
A WOOD SLAT.
SUGGESTED TOOLS:
T-POSTS
CABLE TIES
WOOD SLAT
MALLET
/