MORLEY M2CW Owner's manual

MORLEY
Brand
MORLEY
Model
M2CW
Category
Guitar accessories
Type
Owner's manual

MORLEY M2CW is a guitar pedal that allows you to add a wah effect to your sound. It features a slide pot that controls the wah effect, and two knobs that allow you to adjust the level and contour of the wah. The pedal is also switchless, so you can simply step on it to engage the wah effect and step off to go to bypass.

Here are some of the possible use cases for the MORLEY M2CW:

  • Add a subtle wah effect to your clean guitar sound for a more expressive sound.
  • Use the wah effect to create funky rhythms or lead lines.
  • Experiment with the different level and contour settings to create a wide variety of wah sounds.

MORLEY M2CW is a guitar pedal that allows you to add a wah effect to your sound. It features a slide pot that controls the wah effect, and two knobs that allow you to adjust the level and contour of the wah. The pedal is also switchless, so you can simply step on it to engage the wah effect and step off to go to bypass.

Here are some of the possible use cases for the MORLEY M2CW:

  • Add a subtle wah effect to your clean guitar sound for a more expressive sound.
  • Use the wah effect to create funky rhythms or lead lines.
  • Experiment with the different level and contour settings to create a wide variety of wah sounds.
THANK YOU FOR CHOOSING A MORLEY PEDAL.
YOU NOW OWN THE BEST PEDAL MADE!
Please take a few minutes to familiarize yourself with the features of your new pedal. We hope you enjoy
using it as much as we enjoyed building it.
ABOUT OUR M2 SLIDE POT:
The M2CW Maverick Contour Wah is designed to use a slide pot to control the Wah. A durable
Monofilament cable is used to move the internal slide pot when the foot treadle is moved. We have
developed a special lubricant to extend the slide pot life and prevent static and scratchiness of typical
rotary pots. The M2CW is only available in Europe.
ABOUT THE CONNECTIONS:
9V: To ensure noise free operation, ONLY Morley's 9VDC 300 mA regulated adapter should be used
(center polarity is negative)
IN: Input jack. Plug instrument into this jack using 1/4" guitar cable.
OUT: Connect amplifier to this jack using a 1/4" guitar cable.
USING AN AC ADAPTER:
All Morley pedals use Morley's 9VDC 300 milliamp regulated adapter. Center pin polarity is negative.
Using a non-regulated adapter could cause a low frequency hum in your amplifier.
Using an adapter with the wrong polarity may damage the pedal.
USING A BATTERY:
All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you use a
good quality alkaline battery. To prolong battery life, unplug your cord completely from the input jack
when not using the pedal. When the pedal is not used for extended periods, remove the battery from the
pedal. Our Quick Clip battery door allows for easy access to battery compartment.
ONE YEAR WARRANTY
All Morley® pedals are warranted for one year from date of purchase with a copy of dated purchase
receipt. To obtain warranty service, contact dealer where pedal was purchased.
M2 CONTOUR WAH (MODEL M2CW) FEATURES:
·
·
Switchless: Simply step on to engage Wah, step off to go to bypass.
·
·
Slide Pot: Internal slide pot and durable monofilament control Wah function.
·
·
Contour Mode: Two knobs allow you to adjust the Level and Contour (Tone) of the Wah.
M2CW SPECIFICATIONS:
Power: 9V Battery or 9VDC 300mA regulated
(polarity: center negative)
Indicator: Right LED on = Wah on
Indicator: Left LED on = Contour Wah Mode on
Dimensions: 9.13" L x 5.88" W x 2.75" H
Current Draw: 12 mA @ 9VDC
Slide Pot: 100K Audio Taper
Weight: 3.7 lb./ 1.68 kg
www.morleyproducts.com
  • Page 1 1

MORLEY M2CW Owner's manual

MORLEY
Brand
MORLEY
Model
M2CW
Category
Guitar accessories
Type
Owner's manual

MORLEY M2CW is a guitar pedal that allows you to add a wah effect to your sound. It features a slide pot that controls the wah effect, and two knobs that allow you to adjust the level and contour of the wah. The pedal is also switchless, so you can simply step on it to engage the wah effect and step off to go to bypass.

Here are some of the possible use cases for the MORLEY M2CW:

  • Add a subtle wah effect to your clean guitar sound for a more expressive sound.
  • Use the wah effect to create funky rhythms or lead lines.
  • Experiment with the different level and contour settings to create a wide variety of wah sounds.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents