Handy Home Products 19994-3 Installation guide

Handy Home Products
Brand
Handy Home Products
Model
19994-3
Type
Installation guide

This manual is also suitable for

A. Arrow
B. Mast
C. Base Assembly
D. Bolt of Base Assembly
E. East/West Directional
F. North/South Directional
G. Set Screw of N/S Directional
1. Loosen bolt (D) on base assembly
.
2. Attach mast and base assembly to structure
in desired location with 6 screws or bolts
(not provided). Be sure to use appropriate
hardware for type of roof material and size
and weight of weathervane. Holding mast
vertical (90
o
) firmly tighten bolt (D)
of base assembly.
3. Holding E/W directional (E) onto mast with
4. Place arrow over mast pin. No lubrication
is necessary.
groove of directional located above collar at
middle of mast. Slide N/S directional (F)
down on mast until it interlocks with
directional (E). Rotate both directionals
until the "N" of the N/S directional (F) points
in the direction of North. Tighten set-screw (G).
LDR 11/22/08
16777
1
A
B
C
D
D
E
E
F
F
G
Set Screw
G
2
3 4
WEATHERVANE INSTRUCTIONS
WEATHERVANE PARTS
ASSEMBLY STEPS
  • Page 1 1

Handy Home Products 19994-3 Installation guide

Handy Home Products
Brand
Handy Home Products
Model
19994-3
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents