Page is loading ...
Instruction for 3-Tier Closet Organizer
WARNING:
1. Please follow the step-by-step assembly instructions.
2. Do not use the rack for anything other than its intended use.
3. Do not allow children to hang from or ride on the product.
4. Keep away from heat sources such as heaters and fireplaces.
5. This product is designed for indoor use.
Step 1: Connect Tube "D" and Tube "E"
together. Finish this and you will get 6
pieces of connected tubes in total.
Step 2: Insert the connected tubes into
the Fabric Covers "F", one connected tube
for each side. Finish this and you will get 3
fabric sheets.
Step 3: Connect 2 Tubes "B" in the right holes with
Tubes "C", using the Screwdriver "I" to screw "H".
Repeat this twice. Finish this and you will get two
brackets.
Step 4: Screw one sheet in step 2 to brackets in
step 3. Finish this and you will get the pedestal.
Step 5: Insert the two bent Tubes “A” to the pedestal
in step 4.
Step 6: Screw another two sheet in step 2 to the
pedestal in step 5.
Step 7: Unfold the two Drawers "G" to the organizer.
Step 8: Assembled.
Finish this and you will finally
enjoy the Organizer.
/
