Allied Brass WM-6/3X-GYM Installation guide
- Type
- Installation guide
2.94
74.57
MOUNTING
SCREWS 2X
Step 1:
Determine your desired location for installation and make a mark for the location.Make 2 marks where mounting screws will
be placed as shown below. Drill hole at each of the marks.
Drill holes for the desired location.
MOUNTING
Step 2:
Mount Assembly to desired location through screws provided.
WM-6
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
-
1
Allied Brass WM-6/3X-GYM Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI