PNVBD3621
USER’S MANUAL
SOUND DEADENER AND
VIBRATION DAMPER
2
Thank you for choosing PyleUSA!
To enjoy of the unit’s features, along with proper and safe operation,
please be sure to read through this manual before use.
It is especially important to thoroughly understand and follow all sys-
tem warnings and precautions. Keep the manual in a safe location for
future reference when necessary. Contact your dealer or the nearest
authorized repair center for any service, repair or technical support as-
sistance.
Sound Deadener And Vibration Damper
1. Open the packing you will nd a roll of the sound deadener and a
free tool lit including of a cutter and a roller.
*Be careful of using the cutter and we will be not responsible for the injury
due to improper use.
*If you think the cutter and the roller are not so professional please buy the
professional one in the local market.
2. Open the roll of the product and cut to the size you need.
3. Take away the back layer so you can see and feel the glue.
4. Stick it on the position you need, you can get more information or
help from the car sound engineer or decoration shop or on line about
the best position to reduce the noise and vibration and improve the
sound. Different car or truck has different ways and position.
*Be careful of not damage your car when you dismantle the car.
5. Use the roller to roll out the embossed hexagon on the aluminum
layer in the front till it gets plain for best effect and durability.
3
SOUND DEADENER AND VIBRATION DAMPER
FEATURES AND SPECIFICATIONS
Features:
• Combat Distortion & Effectively Improves Sound Flow
• Noise-Reducing, Sound Dampening Membrane
• Self-Adhesive ‘Double-Stick Tape’ Glue-Backed Style
• Lab Tested Double-Isolation & Flame-Resistant Design
• Absorbs Unwanted Vibrations for Clean Audio
• Quick Setup & Hassle-Free Installation
• Perfect for Vehicle, Studio, Home or Ofce Use
• Used on Walls, Roofs, Ceilings, Paneling, Compartments, etc.
Technical Specs:
• Roll Size: 20.0’’ Height x 22.0’ ft. Length
• Material Composition: Butyl Isoprene Rubber, PIB Polymer, Aluminum
• Sheet Cover
• Material Thickness: 2mm
• Sold as: 1
• Weight: 28.75 lbs.
/
