Sanyo C1211 User manual

Brand: Sanyo

Model: C1211

Category: Split-system air conditioners

Type: User manual

This manual is also suitable for

Sanyo C1211 is a split system air conditioner designed to provide efficient and reliable cooling for residential and commercial spaces. With its advanced features and user-friendly controls, it offers a comfortable indoor environment all year round.

Key capabilities of the Sanyo C1211 include:

Efficient Cooling: With a cooling capacity of 11,500 BTU/h, the C1211 can effectively cool areas up to 1,200 square feet. Its rotary compressor and optimized refrigerant flow ensure efficient and consistent cooling performance.
Multiple Fan Speeds: The C1211 offers three fan speeds – low, medium, and high – to adjust airflow and noise levels according to your preference. This allows you to customize the cooling intensity and maintain a comfortable atmosphere.

Key capabilities of the Sanyo C1211 include:

Efficient Cooling: With a cooling capacity of 11,500 BTU/h, the C1211 can effectively cool areas up to 1,200 square feet. Its rotary compressor and optimized refrigerant flow ensure efficient and consistent cooling performance.
Multiple Fan Speeds: The C1211 offers three fan speeds – low, medium, and high – to adjust airflow and noise levels according to your preference. This allows you to customize the cooling intensity and maintain a comfortable atmosphere.

SERVICE MANUAL (Basic Information)

RS1211 C1211

CL1211

SPLIT SYSTEM AIR CONDITIONER

8526481017700 REFERENCE NO. WM–700703

Indoor Unit Outdoor Unit

C1211 / CL1211

RS1211

SERVICE MANUAL

RS1211 C1211

CL1211

(Basic Information)

WM–700703

iii

WM– 700703

IMPORTANT!

Please Read Before Starting

This air conditioning system meets strict safety and operating

standards. As the installer or service person, it is an important

part of your job to install or service the system so it operates

safely and efficiently.

For safe installation and trouble-free operation, you must:

●

Carefully read this instruction booklet before beginning

●

Follow each installation or repair step exactly as shown

●

Observe all local, state, and national electrical codes

●

Pay close attention to all warning and caution notices

given in this manual

This symbol refers to a hazard

or unsafe practice which can

result in severe personal injury

or death.

This symbol refers to a hazard

or unsafe practice which can

result in personal injury or

product or property damage.

If Necessary, Get Help

These instructions are all you need for most installation

sites and maintenance conditions. If you require help for a

special problem, contact our sales/service outlet or your

certified dealer for additional instructions.

In Case of Improper Installation

The manufacturer shall in no way be responsible for

improper installation or maintenance service, including

failure to follow the instructions in this document.

SPECIAL PRECAUTIONS

When Wiring

ELECTRICAL SHOCK CAN CAUSE SEVERE PER-

SONAL INJURY OR DEATH. ONLY A QUALIFIED,

EXPERIENCED ELECTRICIAN SHOULD

ATTEMPT TO WIRE THIS SYSTEM.

• Do not supply power to the unit until all wiring and tub-

ing are completed or reconnected and checked.

• Highly dangerous electrical voltages are used in this sys-

tem. Carefully refer to the wiring diagram and these

instructions when wiring. Improper connections and inad-

equate grounding can cause accidental injury or death.

• Ground the unit following local electrical codes.

• Connect all wiring tightly. Loose wiring may cause over-

heating at connection points and a possible fire hazard.

When Transporting

Be careful when picking up and moving the indoor and out-

door units. Get a partner to help, and bend your knees when

lifting to reduce strain on your back. Sharp edges or thin

aluminum fins on the air conditioner can cut your fingers.

When Installing…

…In a Ceiling or Wall

Make sure the ceiling/wall is strong enough to hold the

unit’s weight. It may be necessary to construct a strong

wood or metal frame to provide added support.

…In a Room

Properly insulate any tubing run inside a room to prevent

“sweating” that can cause dripping and water damage to

walls and floors.

…In Moist or Uneven Locations

Use a raised concrete pad or concrete blocks to provide a

solid, level foundation for the outdoor unit. This prevents

water damage and abnormal vibration.

…In an Area with High Winds

Securely anchor unit down with bolts and metal frame.

Provide a suitable air baffle.

…In a Snowy Area (for Heat Pump-type Systems)

Install the outdoor unit on a raised platform that is higher

than drifting snow. Provide snow vents.

When Connecting Refrigerant Tubing

• Keep all tubing runs as short as possible.

• Use the flare method for connecting tubing.

• Apply refrigerant lubricant to the matching surfaces of the

flare and union tubes before connecting them, then tighten

the nut with a torque wrench for a leak-free connection.

• Check carefully for leaks before starting the test run.

NOTE:

Depending on the system type, liquid and gas lines may be

either narrow or wide. Therefore, to avoid confusion the

refrigerant tubing for your particular model is specified as

either “narrow” or “wide” rather than as “liquid” or “gas.”

When Servicing

• Turn the power OFF at the main power box (mains)

before opening the unit to check or repair electrical parts.

• Keep your fingers and clothing away from any moving

parts.

• Clean up the site after you finish, remembering to check

that no scraps or bits of wiring have been left inside the

unit being serviced.

WARNING:

CAUTION:

Table of Contents

Page

1. OPERATING RANGE............................................................................................................................... 1

2. SPECIFICATIONS..................................................................................................................................... 2

Unit Specifications ....................................................................................................................................... 2

3. DIMENSIONAL DATA ............................................................................................................................. 3

4. COOLING CAPACITY ............................................................................................................................. 5

5. REFRIGERANT FLOW DIAGRAM....................................................................................................... 6

6. ELECTRICAL DATA................................................................................................................................7

●

Electrical Characteristics....................................................................................................................... 7

●

Electric Wiring Diagram........................................................................................................................ 8

WM– 700703

1. OPERATING RANGE

Temperature Indoor Air Intake Temp. Outdoor Air Intake Temp.

Maximum 95°F DB/71°F WB 115°F DB

Minimum 67°F DB/57°F WB 67°F DB

Temperature Indoor Air Intake Temp. Outdoor Air Intake Temp.

Maximum 95°F DB/71°F WB 115°F DB

Minimum 67°F DB/57°F WB 0°F DB

RS1211 / C1211

RS1211 / CL1211

WM– 700703

DATA SUBJECT TO CHANGE WITHOUT NOTICE.

Remarks: Rating conditions are: Outside air temperature 95°F DB/75°F WB

Indoor unit entering air temperature 80°F DB/67°F WB

2. SPECIFICATIONS

Unit Specifications

Model No.

Indoor unit RS1211

Outdoor unit C1211, CL1211

Cooling

Capacity

BTU/h 11,500

kW 3.37

Air circulation (High) cu. ft./min. 280

Moisture removal (High) pints/h 3.1

Phase, Frequency Hz Single, 60

Voltage rating V 115

Available voltage range V 103 to 127

Running amperes A 11.2

Power input W 1,200

Power factor % 93

Starting amperes A 60

S. E. E. R. BTU/Wh 10.0

Controls Microprocessor

Control unit Wireless remote control unit

Temperature control IC thermostat

Timer ON/OFF 24-hours & Program

Fan speeds Indoor / Outdoor 3 and Auto / 1 (CL1211 Auto)

Air deflector Horizontal / Vertical — / Manual

Air filter Washable, easy access

Compressor Rotary

Refrigerant amount charged at shipment lbs. (kg) R22: 2.66 (1.2)

Refrigerant control Capillary tube

Refrigerant tubing connections Flare type

Operation sound

In-Hi / Me / Lo dB-A 45 / 43 / 41

Out-Hi dB-A 49

Max. allowable tubing length at shipment ft. (m) 33 (10)

Limit of tubing length ft. (m) 65 (20)

Limit of elevation difference ft. (m) Outdoor unit is higher than indoor unit: 23 (7)

between the 2 units Outdoor unit is lower than indoor unit: 23 (7)

Refrigerant tube o.d.

Narrow tube in. (mm) 1/4 (6.35)

Wide tube in. (mm) 1/2 (12.7)

Refrigerant tube kit Optional

Accessories Mounting bracket

Indoor unit Outdoor unit

Height in. (mm) 12-5/8 (320) 20-7/8 (530)

Width in. (mm) 31-29/32 (810) 29-17/32 (750)

Depth in. (mm) 24-13/32 (620) 11-1/32 (280)

Net weight lbs. (kg) 68 (30.8) 90.4 (41)

Shipping volume cu. ft. (cu. m) 11.7 (0.329) 6.7 (0.19)

Shipping weight lbs. (kg) 99 (44.6) 97.1 (44)

Performance

Electrical Rating

Features

Dimensions & Weight

WM– 700703

3. DIMENSIONAL DATA

Indoor Unit: RS1211

Wireless remote control unit

2-13/64 19/32

6-7/64

31-29/32

27-1/32

Air intake

Ceiling panel detail

8-7/32

24-13/32

Air discharge

2-3/4

25/32 1-3/16

30-23/32 (For ceiling opening)

27-3/8

4-19/32 × 1-3/16 Oval holes

Hole for suspension bolt

19/32

2-3/4

25/32 1-3/16

2-3/4

19/32

18-11/16

7-11/16

23-7/32 (For ceiling opening)

Power wiring outlet

1-3/32

1-3/16

11-13/32

2-3/8

25-3/16

1/4" Narrow tube fitting

1/2" Wide tube fitting

PVC drain pipe

OD 1-1/32

Use drain pipe adapter

(accessory)

4-11/32

10-5/8

2-3/8

25/32

Air discharge

Drain pipe for service

11-5/16

1-9/16

4-17/32

Air intake

22-1/16

6-9/16

3-7/32

25/36

WM– 700703

Outdoor Unit: C1211 / CL1211

4 × 15/32 dia. hole

Air intake

Air discharge

23-15/16 2-3/8

29-17/32

Air

intake

Check port

2-1/4

1-3/16 9-27/32

20-7/8

21/32

3-23/32 2-3/8

1/4" narrow tubing

service valve

1/2" wide tubing

service valve

10-23/32

11-7/8

4. COOLING CAPACITY

115V

RS1211 / C1211 and CL1211

WM– 700703

TC: Total Cooling Capacity (BTU/H)

SHC: Sensible Heat Capacity (BTU/H)

kW: Compressor Input (kW)

Remarks: Rating conditions (* mark) are: Outside ambient temperature 95°F DB

Indoor unit entering air temperature 80°F DB/67°F WB

Rating Capacity: 11,500 BTU/H Air Flow Rate: 280 CFM

Evaporator Condenser

Ent. Temp. °F/(°C) Ambient Temp. °F/(°C)

WB DB

75 85 95 105 115

(23.9) (29.4) (35.0) (40.6) (46.1)

TC 11,390 10,870 10,350 9,760 8,970

kW 0.85 0.93 1.01 1.10 1.21

59 72 (22.2) SHC 8,140 7,870 7,600 7,310 6,920

(15.0) 76 (24.4) SHC 9,150 8,880 8,610 8,320 7,930

80 (26.7) SHC 10,210 9,940 9,670 9,380 8,970

84 (28.9) SHC 11,220 10,870 10,350 9,760 8,970

88 (31.1) SHC 11,390 10,870 10,350 9,760 8,970

TC 11,780 11,410 10,960 10,360 9,550

kW 0.86 0.94 1.03 1.12 1.23

63 72 (22.2) SHC 6,860 6,680 6,470 6,190 5,820

(17.2) 76 (24.4) SHC 7,870 7,690 7,480 7,200 6,830

80 (26.7) SHC 8,930 8,750 8,540 8,260 7,890

84 (28.9) SHC 9,940 9,760 9,550 9,270 8,900

88 (31.1) SHC 10,950 10,770 10,560 10,280 9,550

TC 12,100 11,900 *11,500 10,870 10,120

kW 0.87 0.95 1.04 1.13 1.26

67 72 (22.2) SHC 5,530 5,450 5,270 5,000 4,690

(19.4) 76 (24.4) SHC 6,550 6,460 6,290 6,020 5,700

80 (26.7) SHC 7,600 7,520 7,340 7,070 6,760

84 (28.9) SHC 8,620 8,530 8,360 8,090 7,770

88 (31.1) SHC 9,630 9,540 9,370 9,100 8,790

TC 12,480 12,270 11,960 11,420 10,750

kW 0.88 0.96 1.06 1.16 1.28

71 72 (22.2) SHC 4,170 4,090 3,970 3,760 3,510

(21.7) 76 (24.4) SHC 5,190 5,110 4,980 4,770 4,520

80 (26.7) SHC 6,240 6,160 6,040 5,830 5,580

84 (28.9) SHC 7,260 7,180 7,050 6,840 6,590

88 (31.1) SHC 8,270 8,190 8,070 7,860 7,600

TC 12,720 12,580 12,310 11,870 11,390

kW 0.89 0.98 1.07 1.19 1.32

75 76 (24.4) SHC 3,830 3,780 3,690 3,530 3,370

(23.9) 80 (26.7) SHC 4,890 4,840 4,740 4,590 4,420

84 (28.9) SHC 5,900 5,850 5,760 5,600 5,440

88 (31.1) SHC 6,910 6,870 6,770 6,620 6,450

Wide tube

O.D.

1/2"

(12.7 mm)

Narrow tube

O.D.

1/4"

(6.35 mm)

Evaporator

Service

valve

Capillary

tube Drier

Check

port

Compressor

Accumulator

Service

valve

Condenser

INDOOR UNIT RS1211 OUTDOOR UNIT C1211

5. REFRIGERANT FLOW DIAGRAM

RS1211 / C1211 and RS1211 / CL1211

WM– 700703

6. ELECTRICAL DATA

● Electrical Characteristics

RS1211 / C1211 and RS1211 / CL1211

WM– 700703

Performance at

Indoor Unit Outdoor Unit

Complete Unit

115V – 1ø – 60Hz

Fan Motor Fan Motor Compressor

Rating Conditions

A 0.71 0.69 9.81 11.2

W 79 77 1,044 1,200

Locked-Rotor Amperes A 1.15 1.14 60 —

Remarks: Rating conditions are: Outside air temperature 95°F DB/75°F WB

Indoor unit entering air temperature 80°F DB/67°F WB

● Electric Wiring Diagram

Indoor Unit: RS1211

WM– 700703

1 2

DP1

TO OUTDOOR UNIT

Power transformer

1 2

1 7

BLK

1 2

BLK

1 2 3

1 9

1 10

1 2

WHT

1 2

BRN

BRNBRN

1 2 3

1 2

DP2

1 2

RED

FS1 FS2

1 2

BLK

H M

1 2

BLU

VLT

BLU

VLT

FM2

GRY

BRN

PNK

FMI

GRY

BRN

PNK

2P (BLK)

SUP

3P (BLK)

RS1211RW

Switch assy IND lamp assyThermistor

Connector

3P (WHT)

Connector

9P (WHT)

2P (RED)

TH1

2P (BLK)

TH2

10P (WHT) 2P (RED)

PRY

2P (WHT)

SEC

Controller (POW-RS1211)

Connector

2P (WHT)

TH1 (Coil)

TH2 (Room)

Capacitor

Terminal

plate (3P)

NO COM

Compressor relay

Drain pump

Indoor fan motor

Connector

9P (BLK)

Connector

2P (RED)

Connector

2P (WHT)

Float switch

Earth

terminals

WHT

BRN

BLK

WHT

ORGORG

BRN

BLK

ORG

RED

GRN

BLK

YEL

WARNING:

To avoid electrical shock hazard, be sure to

disconnect power before checking, servicing

and/or cleaning any electrical parts.

WM– 700703

Outdoor Unit: C1211

BRN

PNK

BLU

BLK

WHT

RED

BLK

WHT

BLK

RED

Fan motor

Capacitor

BLK

WHT

Capacitor

Overload

relay

Compressor motor

Terminal plate

TO INDOOR UNIT

Power

supply

Thermistor

Fuse

WARNING:

To avoid electrical shock hazard, be sure to

disconnect power before checking, servicing

and/or cleanin

electrical

arts.

WM– 700703

Outdoor Unit: CL1211

BLK

Fan

motor

Capacitor

Relay (1)

TO INDOOR UNIT

Power

supply

Thermistor

Fuse

1 2

BLK

Air sensor

GRY

THR1

THR2

PO2

BLK

1 2

BLK

Coil sensor

BLK

THC1

THC2

2P Connector

(YEL)

2P Connector

(BLU)

FU1P2P1S2S1

PO1

FU2

SSR

POW-123CL

2P Connector

(WHT)

2P Connector

(RED)

TRANS

Relay (2)

4P Connector (WHT)

Capacitor

Compressor motorTerminal plate

OLR

713

Crank case

heater

BLK

BLU

YEL

PNK

BLK

WHT

PNK

ORG

GRY

ORG

GRY

BRN

PNK

BLU

PNK

BRN

BLK

WHT

PNK

WHT

BRN

WHT

RED

BRN

ORG

YEL

PNK

BRN BRN

RED

VLT

BLU

WARNING:

To avoid electrical shock hazard, be sure to

disconnect power before checking, servicing

and/or cleanin

electrical

arts.

For parts or service contact

SFS Corporation: 1200 West Artesia Blvd., Compton, California 90220

Printed in U.S.A.

CORPORATION

1991/Nov./12M

SANYO Canada Inc.: Toronto, Ont. M4H 1M6In Canada

WM– 700703

H407/12M Printed in U.S.A.

Sanyo C1211 User manual

Brand: Sanyo

Model: C1211

Category: Split-system air conditioners

Type: User manual

This manual is also suitable for

Key capabilities of the Sanyo C1211 include:

Efficient Cooling: With a cooling capacity of 11,500 BTU/h, the C1211 can effectively cool areas up to 1,200 square feet. Its rotary compressor and optimized refrigerant flow ensure efficient and consistent cooling performance.
Multiple Fan Speeds: The C1211 offers three fan speeds – low, medium, and high – to adjust airflow and noise levels according to your preference. This allows you to customize the cooling intensity and maintain a comfortable atmosphere.

Download PDF

report

Sanyo C1211 User manual

This manual is also suitable for

Sanyo C1211 User manual

Related papers

Other documents