McAfee QUICKCLEAN 1.0 User manual

Brand: McAfee

Model: QUICKCLEAN 1.0

Type: User manual

McAfee QuickClean

User’s Guide

Version 1.0

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

any language in any form or by any means without the written permission of Networks Associates

Technology, Inc., or its suppliers or affiliate companies.

TRADEMARK ATTRIBUTIONS

* ActiveHelp, Bomb Shelter, Building a World of Trust, CipherLink, Clean-Up, Cloaking, CNX, * ActiveHelp, Bomb

Shelter, Building a World of Trust, CipherLink, Clean-Up, Cloaking, CNX, Compass 7, CyberCop, CyberMedia,

Data Security Letter, Discover, Distributed Sniffer System, Dr Solomon’s, Enterprise Secure Cast, First Aid,

ForceField, Gauntlet, GMT, GroupShield, HelpDesk, Hunter, ISDN Tel/Scope, LM 1, LANGuru, LeadingHelp

Desk Technology, Magic Solutions, MagicSpy, MagicTree, Magic University, MagicWin, MagicWord, McAfee,

McAfee Associates, MoneyMagic, More Power To You, Multimedia Cloaking, NetCrypto, NetOctopus, NetRoom,

NetScan, Net Shield, NetShield, NetStalker, Net Tools, Network Associates, Network General, Network Uptime!,

NetXRay, Nuts & Bolts, PC Medic, PCNotary, PGP, PGP (Pretty Good Privacy), PocketScope, Pop-Up,

PowerTelnet, Pretty Good Privacy, PrimeSupport, RecoverKey, RecoverKey-International, ReportMagic,

RingFence, Router PM, Safe & Sound, SalesMagic, SecureCast, Service Level Manager, ServiceMagic, Site Meter,

Sniffer, SniffMaster, SniffNet, Stalker, Statistical Information Retrieval (SIR), SupportMagic, Switch PM,

TeleSniffer, TIS, TMach, TMeg, Total Network Security, Total Network Visibility, Total Service Desk, Total Virus

Defense, T-POD, Trusted Mach,Trusted Mail, Uninstaller, Virex, Virex-PC, Virus Forum, ViruScan, VirusScan,

VShield, WebScan, WebShield, WebSniffer, WebStalker, WebWall, and ZAC 2000 are registered trademarks of

Network Associates and/or its affiliates in the US and/or other countries. All other registered and unregistered

trademarks in this document are the sole property of their respective owners.

LICENSE AGREEMENT

NOTICE TO ALL USERS: CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT

("AGREEMENT"), FOR THE LICENSE OF SPECIFIED SOFTWARE ("SOFTWARE") BY NETWORK

ASSOCIATES, INC. ("McAfee"). BY CLICKING THE ACCEPT BUTTON OR INSTALLING THE

SOFTWARE, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) CONSENT TO BE BOUND BY

AND BECOME A PARTY TO THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS

OF THIS AGREEMENT, CLICK THE BUTTON THAT INDICATES THAT YOU DO NOT ACCEPT THE

TERMS OF THIS AGREEMENT AND DO NOT INSTALL THE SOFTWARE. (IF APPLICABLE, YOU

MAY RETURN THE PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.)

1. License Grant. Subject to the payment of the applicable license fees, and subject to the terms and

conditions of this Agreement, McAfee hereby grants to you a non-exclusive, non-transferable right

to use one copy of the specified version of the Software and the accompanying documentation (the

"Documentation"). You may install one copy of the Software on one computer, workstation,

personal digital assistant, pager, "smart phone" or other electronic device for which the Software

was designed (each, a "Client Device"). If the Software is licensed as a suite or bundle with more

than one specified Software product, this license applies to all such specified Software products,

subject to any restrictions or usage terms specified on the applicable price list or product

packaging

that apply to any of such Software products individually.

a. Use. The Software is licensed as a single product; it may not be used on more than one Client

Device or by more than one user at a time, except as set forth in this Section 1. The Software is "in

use" on a Client Device when it is loaded into the temporary memory (i.e., random-access

memory or RAM) or installed into the permanent memory (e.g., hard disk, CD-ROM, or other

Issued August 2000 / McAfee QuickClean v1.0

storage device) of that Client Device. This license authorizes you to make one copy of

the Software solely for backup or archival purposes, provided that the copy you make

contains all of the Software’s proprietary notices.

b. Server-Mode. You may use the Software on a Client Device as a server ("Server") within a

multi-user or networked environment ("Server-Mode") only if such use is permitted in the

applicable price list or product packaging for the Software. A separate license is required for each

Client Device or "seat" that may connect to the Server at any time, regardless of whether such

licensed Client Devices or seats are concurrently connected to, accessing or using the Software.

Use of software or hardware that reduces the number of Client Devices or seats directly accessing

or utilizing the Software (e.g., "multiplexing" or "pooling" software or hardware) does not reduce

the number of licenses required (i.e., the required number of licenses would equal the number of

distinct inputs to the multiplexing or pooling software or hardware "front end"). If the number

of Client Devices or seats that can connect to the Software can exceed the number of licenses you

have obtained, then you must have a reasonable mechanism in place to ensure that your use of

the Software does not exceed the use limits specified for the licenses you have obtained. This

license authorizes you to make or download one copy of the Documentation for each Client

Device or seat that is licensed, provided that each such copy contains all of the Documentation’s

proprietary notices.(i.e., the required number of licenses would equal the number of distinct

inputs to the multiplexing or pooling software or hardware "front end"). If the number of Client

Devices or seats that can connect to the Software can exceed the number of licenses you have

obtained, then you must have a reasonable mechanism in place to ensure that your use of the

Software does not exceed the use limits specified for the licenses you have obtained. This license

authorizes you to make or download one copy of the Documentation for each Client Device or

seat that is licensed, provided that each such copy contains all of the Documentation’s proprietary

notices.

c. Volume Licenses. If the Software is licensed with volume license terms specified in the applicable

price list or product packaging for the Software, you may make, use and install as many

additional copies of the Software on the number of Client Devices as the volume license

authorizes. You must have a reasonable mechanism in place to ensure that the number of Client

Devices on which the Software has been installed does not exceed the number of licenses you

have obtained. This license authorizes you to make or download one copy of the Documentation

for each additional copy authorized by the volume license, provided that each such copy contains

all of the Documentation’s proprietary notices.

2. Term. This Agreement is effective for an unlimited duration unless and until earlier terminated as

set forth herein. This Agreement will terminate automatically if you fail to comply with any of the

limitations or other requirements described herein. Upon any termination or expiration of this

Agreement, you must destroy all copies of the Software and the Documentation. You may terminate

this Agreement at any point by destroying all copies of the Software and the Documentation.

3. Updates. For the time period specified in the applicable price list or product packaging for the

Software you are entitled to download revisions or updates to the Software when and as McAfee

publishes them via its electronic bulletin board system, website or through other online services.

For a period of ninety (90) days from the date of the original purchase of the Software, you are

entitled to download one (1) revision or upgrade to the Software when and as McAfee publishes it

via its electronic bulletin board system, website or through other online services. After the specified

time period, you have no further rights to receive any revisions or upgrades without purchase of a

new license or annual upgrade plan to the Software.

4. Ownership Rights. The Software is protected by United States copyright laws and international

treaty provisions. McAfee and its suppliers own and retain all right, title and interest in and to the

Software, including all copyrights, patents, trade secret rights, trademarks and other intellectual

property rights therein. Your possession, installation, or use of the Software does not transfer to you

any title to the intellectual property in the Software, and you will not acquire any rights to the

Software except as expressly set forth in this Agreement. All copies of the Software and

Documentation made hereunder must contain the same proprietary notices that appear on and in

the Software and Documentation.

User’s Guide iii

5. Restrictions. You may not rent, lease, loan or resell the Software. You may not permit

third parties to benefit from the use or functionality of the Software via a timesharing,

service bureau or other arrangement, except to the extent such use is specified in the

applicable list price or product packaging for the Software. You may not transfer any of

the rights granted to you under this Agreement. You may not reverse engineer,

decompile, or disassemble the Software, except to the extent the foregoing restriction is

expressly prohibited by applicable law. You may not modify, or create derivative works

based upon, the Software in whole or in part. You may not copy the Software or

Documentation except as expressly permitted in Section 1 above. You may not remove

any proprietary notices or labels on the Software. All rights not expressly set forth

hereunder are reserved by McAfee. McAfee reserves the right to periodically conduct

audits upon advance written notice to verify compliance with the terms of this

Agreement.

6. Warranty and Disclaimer

a. Limited Warranty. McAfee warrants that for sixty (60) days from the date of original

purchase the media (e.g., diskettes) on which the Software is contained will be free from

defects in materials and workmanship.

b. Customer Remedies. McAfee’s and its suppliers’ entire liability and your exclusive

remedy for any breach of the foregoing warranty shall be, at McAfee’s option, either (i)

return of the purchase price paid for the license, if any, or (ii) replacement of the

defective media in which the Software is contained. You must return the defective

media to McAfee at your expense with a copy of your receipt. This limited warranty is

void if the defect has resulted from accident, abuse, or misapplication. Any replacement

media will be warranted for the remainder of the original warranty period. Outside the

United States, this remedy is not available to the extent McAfee is subject to restrictions

under United States export control laws and regulations.

c. Warranty Disclaimer. Except for the limited warranty set forth herein, THE

SOFTWARE IS PROVIDED "AS IS." TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, MCAFEE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NONINFRINGEMENT WITH RESPECT TO THE SOFTWARE AND THE

ACCOMPANYING DOCUMENTATION. YOU ASSUME RESPONSIBILITY FOR

SELECTING THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR

THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE

SOFTWARE. WITHOUT LIMITING THE FOREGOING PROVISIONS, MCAFEE

MAKES NO WARRANTY THAT THE SOFTWARE WILL BE ERROR-FREE OR FREE

FROM INTERRUPTIONS OR OTHER FAILURES OR THAT THE SOFTWARE WILL

MEET YOUR REQUIREMENTS. SOME STATES AND JURISDICTIONS DO NOT

ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE LIMITATION

MAY NOT APPLY TO YOU. The foregoing provisions shall be enforceable to the

maximum extent permitted by applicable law.

iv McAfee QuickClean

7. Limitation of Liability. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL

THEORY, WHETHER IN TORT, CONTRACT, OR OTHERWISE, SHALL MCAFEE OR

ITS SUPPLIERS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY

CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF

GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR FOR

ANY AND ALL OTHER DAMAGES OR LOSSES. IN NO EVENT WILL MCAFEE BE

LIABLE FOR ANY DAMAGES IN EXCESS OF THE LIST PRICE MCAFEE CHARGES

FOR A LICENSE TO THE SOFTWARE, EVEN IF MCAFEE SHALL HAVE BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF

LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY

TO THE EXTENT THAT APPLICABLE LAW PROHIBITS SUCH LIMITATION.

FURTHERMORE, SOME STATES AND JURISDICTIONS DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,

SO THIS LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU. The foregoing

provisions shall be enforceable to the maximum extent permitted by applicable law.

8. United States Government. The Software and accompanying Documentation are deemed

to be "commercial computer software" and "commercial computer software

documentation," respectively, pursuant to DFAR Section 227.7202 and FAR Section

12.212, as applicable. Any use, modification, reproduction, release, performance, display

or disclosure of the Software and accompanying Documentation by the United States

Government shall be governed solely by the terms of this Agreement and shall be

prohibited except to the extent expressly permitted by the terms of this Agreement.

9. Export Controls. Neither the Software nor the Documentation and underlying

information or technology may be downloaded or otherwise exported or re-exported (i)

into (or to a national or resident of ) Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria or

any other country to which the United States has embargoed goods; or (ii) to anyone on

the United States Treasury Department’s list of Specially Designated Nations or the

United States Commerce Department’s Table of Denial Orders. By downloading or using

the Software you are agreeing to the foregoing and you are certifying that you are not

located in, under the control of, or a national or resident of any such country or on any

such list.

IN ADDITION, YOU SHOULD BE AWARE OF THE FOLLOWING: EXPORT OF THE

SOFTWARE MAY BE SUBJECT TO COMPLIANCE WITH THE RULES AND

REGULATIONS PROMULGATED FROM TIME TO TIME BY THE BUREAU OF

EXPORT ADMINISTRATION, UNITED STATES DEPARTMENT OF COMMERCE,

WHICH RESTRICT THE EXPORT AND RE-EXPORT OF CERTAIN PRODUCTS AND

TECHNICAL DATA. IF THE EXPORT OF THE SOFTWARE IS CONTROLLED UNDER

SUCH RULES AND REGULATIONS, THEN THE SOFTWARE SHALL NOT BE

EXPORTED OR RE-EXPORTED, DIRECTLY OR INDIRECTLY, (A) WITHOUT ALL

EXPORT OR RE-EXPORT LICENSES AND UNITED STATES OR OTHER

GOVERNMENTAL APPROVALS REQUIRED BY ANY APPLICABLE LAWS, OR (B) IN

VIOLATION OF ANY APPLICABLE PROHIBITION AGAINST THE EXPORT OR

RE-EXPORT OF ANY PART OF THE SOFTWARE.

User’s Guide v

SOME COUNTRIES HAVE RESTRICTIONS ON THE USE OF ENCRYPTION WITHIN

THEIR BORDERS, OR THE IMPORT OR EXPORT OF ENCRYPTION EVEN IF FOR

ONLY TEMPORARY PERSONAL OR BUSINESS USE. YOU ACKNOWLEDGE THAT

THE IMPLEMENTATION AND ENFORCEMENT OF THESE LAWS IS NOT ALWAYS

CONSISTENT AS TO SPECIFIC COUNTRIES. ALTHOUGH THE FOLLOWING

COUNTRIES ARE NOT AN EXHAUSTIVE LIST THERE MAY EXIST RESTRICTIONS

ON THE EXPORTATION TO, OR IMPORTATION OF, ENCRYPTION BY: BELGIUM,

CHINA (INCLUDING HONG KONG), FRANCE, INDIA, INDONESIA, ISRAEL,

RUSSIA, SAUDI ARABIA, SINGAPORE, AND SOUTH KOREA. YOU

ACKNOWLEDGE IT IS YOUR ULTIMATE RESPONSIBILITY TO COMPLY WITH ANY

AND ALL GOVERNMENT EXPORT AND OTHER APPLICABLE LAWS AND THAT

MCAFEE HAS NO FURTHER RESPONSIBILITY AFTER THE INITIAL SALE TO YOU

WITHIN THE ORIGINAL COUNTRY OF SALE.

10.High Risk Activities. The Software is not fault-tolerant and is not designed or intended

for use in hazardous environments requiring fail-safe performance, including without

limitation, in the operation of nuclear facilities, aircraft navigation or communication

systems, air traffic control, weapons systems, direct life-support machines, or any other

application in which the failure of the Software could lead directly to death, personal

injury, or severe physical or property damage (collectively, "High Risk Activities").

McAfee expressly disclaims any express or implied warranty of fitness for High Risk

Activities.

11.Miscellaneous. This Agreement is governed by the laws of the United States and the State

of California, without reference to conflict of laws principles. The application of the

United Nations Convention of Contracts for the International Sale of Goods is expressly

excluded. This Agreement sets forth all rights for the user of the Software and is the entire

agreement between the parties. This Agreement supersedes any other communications

with respect to the Software and Documentation. This Agreement may not be modified

except by a written addendum issued by a duly authorized representative of McAfee. No

provision hereof shall be deemed waived unless such waiver shall be in writing and

signed by McAfee or a duly authorized representative of McAfee. If any provision of this

Agreement is held invalid, the remainder of this Agreement shall continue in full force

and effect. The parties confirm that it is their wish that this Agreement has been written

in the English language only.

12.McAfee Customer Contact. If you have any questions concerning these terms and

conditions, or if you would like to contact McAfee for any other reason, please call (408)

988-3832, fax (408) 970-9727, or write: McAfee Software, 3965 Freedom Circle, Santa Clara,

California 95054. http://software.mcafee.com.

Statements made to you in the course of this sale are subject to the Year 2000 Information

and Readiness Disclosure Act (Public Law 105-271). In the case of a dispute, this Act may

reduce your legal rights regarding the use of any statements regarding Year 2000

readiness, unless otherwise specified in your contract or tariff.

vi McAfee QuickClean

User’s Guide vii

Table of Contents

Chapter 1. Welcome to QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Using QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Chapter 2. Installing QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Installing QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Create the SmartLinks database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Updating the SmartLinks database . . . . . . . . . . . . . . . . . . . . . . . . .12

About the Interview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Putting QuickClean to work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

About QuickClean wizards? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

About PowerClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Changing QuickClean defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

About McAfee Guardian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Chapter 3. Freeing Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Using QuickClean Lite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Keeping computer free of unnecessary files . . . . . . . . . . . . . . . . . . . . . .19

Setting up QuickClean Lite to run automatically . . . . . . . . . . . . . . . . . .19

Scheduling QuickClean Lite to run at a specific time . . . . . . . . . . . . . . .20

Using SpaceMaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Freeing specific amount of disk space on a drive . . . . . . . . . . . . . . . . .20

Changing defaults for SpaceMaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Chapter 4. Managing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Using Remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Getting rid of an application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Using Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Making a copy of an application to rebuild on another computer . . . . .25

Rebuilding a transported application on another computer . . . . . . . . .25

Using Archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Archiving an application to be used later . . . . . . . . . . . . . . . . . . . . . . . .26

User’s Guide viii

Table of Contents

Using Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Moving an application from one location to another . . . . . . . . . . . . . . .27

Using BackTrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Monitoring installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Setting BackTrack Monitor to run in the background . . . . . . . . . . . . . .29

Monitoring installation of a single application . . . . . . . . . . . . . . . . . . . .29

Undoing an monitored application installation . . . . . . . . . . . . . . . . . . . .29

Chapter 5. Restoring Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Using Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Restoring an archived or backed-up application . . . . . . . . . . . . . . . . . .31

Restoring deleted files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Getting rid of backup copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

About Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Viewing what QuickClean has done . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Chapter 6. Using PowerClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

PowerClean feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

PowerClean feature open in read-only mode . . . . . . . . . . . . . . . . . . . . .38

Working with the PowerClean feature . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Default file groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Creating a custom group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

PowerClean command menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Using the tab panes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

About color codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Changing the defaults for the PowerClean feature . . . . . . . . . . . . . . . . .44

Viewing what PowerClean feature has done . . . . . . . . . . . . . . . . . . . . . .45

Appendix A. Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

How to Contact McAfee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Support via the web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Telephone support numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

User’s Guide 9

1Welcome to QuickClean

QuickClean can be used for many more purposes than simply uninstalling old

applications.

For example, QuickClean can clean up junk files that have built up on your

computer as you browsed the Internet, and it can do this cleanup

automatically on a schedule that you specify. QuickClean can also move

applications from one hard disk to another— even to another computer—and

change all references to the application at the same time.

Consider the following questions for more suggestions.

Using QuickClean

Think about how you use your computer to see how useful QuickClean can be.

Do you….

• Have programs that you don’t use anymore, for example games that you

don’t play frequently?

Use the Archive wizard to create an archive of programs or games by

compressing them. Then when you want to play a game again, click the old

shortcut to the game and let QuickClean restore it to its original location.

• Use the Internet?

When you surf the Internet, your computer can collect megabytes of

Internet junk files. Images, plug-ins, and other files you won’t need again

are downloaded to your computer. QuickClean Lite can delete these files

quickly and reclaim disk space.

• Have a Zip

drive or other large-capacity removable disk drive?

QuickClean’s Archive and Transport wizards can compress entire

applications to a large removable disk. When you want the applications

again, you restore them to the original computer or rebuild them on a

different computer without losing any setup information.

Perhaps more importantly, you can specify that QuickClean backups

should be stored on a large removable disk to save space on your internal

hard drive.

• Have a new, second hard disk?

Use the Move wizard to relocate applications on the new disk and free

space on the old disk without losing any setup information.

Welcome to QuickClean

10 McAfee QuickClean

• Have outdated applications that you will never use again?

If you have old applications that you no longer use, the Remove wizard

will remove all traces of them from your computer.

Of course, if you think you might use an application again in some

circumstances, you can use the Archive wizard to create a compressed

backup copy and keep shortcuts to the application on your computer so

that you can restore it easily.

About this manual

This manual contains general information about using QuickClean. It does not

describe step-by-step use of the QuickClean wizards.

More detailed procedural information and step-by-step information about the

wizards are contained in the online help. In any dialog box, click Help for

specific information about the dialog box. When using the PowerClean

feature, click PowerClean Help on the Help menu.

For information on new additions to QuickClean, you can also open the

Readme.txt file located in the QuickClean folder on your computer to view

additional information.

User’s Guide 11

2Installing QuickClean

The installation program on the QuickClean CD lets you install the program

easily on your computer. Installation should start automatically when you put

the CD in the CD-ROM drive. The information in the following paragraphs

will help you install and start using QuickClean.

Installing QuickClean

You can install and run QuickClean if your computer is running Windows

or later, or Windows NT 4.0 or later.

 NOTE: To install QuickClean on Windows NT, you must be logged in as

a user who has Administrator privileges.

To install QuickClean:

1. Insert the QuickClean CD into your CD drive.

The installation wizard should start automatically. If it does not, click the

drive letter of your CD drive in Windows Explorer, and double-click the

file named Setup.exe in the file list.

2. In the first installation wizard page, click Install QuickClean.

3. Follow the instructions in the wizard pages to choose the drive and

folder where QuickClean should be installed.

After each step, click Next.

4. Click Finish in the final setup screen.

By default, the Readme file appears in Notepad. If you do not want to

read the release notes in the Readme file, clear the check in the View

release notes? check box before you click Finish.

Installing QuickClean

12 McAfee QuickClean

Create the SmartLinks database

The SmartLinks database stores information about the relationship between

files on your computer. It stores the names and locations of all files needed by

the operating system. For each application, the SmartLinks database stores

information about all of the files that the application needs to run correctly,

including icons, dynamically linked libraries (DLLs), and other executable

files, as well as operating system files that are used by the application. This

information makes the SmartLinks database a complete, cross-referenced

record of how executable and system files are used on your computer.

It is this information that makes using QuickClean quick and safe. It ensures

that applications can be moved, archived, deleted, and transported safely and

completely, and it determines the files that can be safely deleted without

damaging an application or the operating system.

The SmartLinks database is created when you install QuickClean. Because

building the database the first time can take several minutes, it is created in the

background as you provide some default information in an interview wizard.

Updating the SmartLinks database

After QuickClean has created the SmartLinks database for your computer,

updating it takes much less time. Only records for files that have changed are

updated.

QuickClean updates the SmartLinks database in the following circumstances:

• Each time you start QuickClean, the old version of the database is

compared with new information on your computer.

• After you restore files or applications from QuickClean backup copies,

QuickClean records changes that it has just made.

• After you delete or archive files or applications, QuickClean records

changes.

• After you manually select a wizard from the main QuickClean screen,

QuickClean records changes that the wizard makes.

About the Interview

As you install QuickClean, you answer a few questions about how you use

files on your computer, and whether you want to schedule some QuickClean

events.

To run the interview again, click Customization Interview on the Options

menu in the main QuickClean screen.

User’s Guide 13

Installing QuickClean

The Settings dialog box pages also let you view or change all settings that you

specified in the interview. For information about using the Settings dialog box,

see “Changing QuickClean defaults,” on page 14.

Putting QuickClean to work

QuickClean uses safe and simple wizards to perform its major tasks. When

you use an QuickClean wizard to clean up your hard disk or manage

applications, at each step you see exactly what you are specifying, and you can

go back to previous screens and change options if you change your mind.

Even if you are an expert computer user, QuickClean wizards can automate

tasks, such as removing junk files, that would otherwise be time-consuming or

error-prone.

To run a QuickClean wizard, click its button in the main QuickClean window.

About QuickClean wizards?

QuickClean wizards simplify cleaning up disk space and managing

applications.

 NOTE: Wizards are designed to be easy to understand and to use. Each

wizard screen tells you what you need to know to enter information or

choose options. If you want to know more about a wizard, click Help.

By default, SpaceMaker and Remove wizards create backup copies of files

before they are deleted. Although you can turn off backup creation when you

run the wizard, it is a good idea to make backups. Later, when you are sure

that you do not want to undo any QuickClean actions, you can delete the

backup copy.

Table 2-1. The QuickClean wizards

This wizard... Does this...

QuickClean

Lite

Deletes various kinds of junk files and unconnected items on

various folders such as your PC’s Internet Cache, Recycle Bin,

Temporary Files, Shortcut and Windows Registry.

QuickClean can be scheduled to run automatically at any

interval you specify.

Remove Deletes any application you specify, and removes all related

shortcuts and Registry entries.

Installing QuickClean

14 McAfee QuickClean

About PowerClean

PowerClean is not a wizard. It is a feature that lets you see files on your

computer, organized into categories, such as Internet Junk, Duplicate Files,

Archives, Multimedia Files, and so on. The feature also displays application

information that is stored in the Windows Registry.

If you are an experienced computer user, you can use PowerClean to manage

files manually. If you are interested in tracking specific files or files in specific

folders, you can even create custom files groups.

Changing QuickClean defaults

As you install QuickClean, you have the chance to change some basic defaults

in the Interview. Later, after QuickClean is installed, you can use the Settings

dialog box to review or change all default settings.

Archive Compresses an application into a backup file that you can

restore whenever you need it again. You can also include data

files that are associated with the application, if there are any.

Move Relocates an application. Completely moves an application

from one drive or folder to another—even to another

computer—and adjusts shortcuts and Registry entries to refer

to the application in its new location.

Transport Packages an application so that you can rebuild it with the

same option settings on another computer. You can also select

and include data files that are associated with the application.

Restore Restores deleted applications or files if backup copies were

created.

You can restore an entire application, a few files from an

application, or a few miscellaneous files, such as those deleted

by Remove or SpaceMaker—but only if backup copies were

created before the files were deleted.

BackTrack Monitors application installation.

Lets you undo the installation of any application if it was

monitored by BackTrack.

SpaceMaker Deletes old files in specific categories until it has freed the

amount of disk space you specify.

Table 2-1. The QuickClean wizards (Continued)

This wizard... Does this...

User’s Guide 15

Installing QuickClean

To see exactly what the default settings are, or to change them, click Settings

on the Options menu in the main QuickClean screen. Then in the next window

displayed, select any of the buttons available corresponding to the component

category you want to change the default setting on or view its default settings.

NOTE: The SpaceMaker, BackTrack, and QuickClean Lite wizards and

the PowerClean feature all have Settings dialog box pages where you

specify their default behavior, including the age that files must be before

they can be deleted.

You can change most option settings temporarily when you run a wizard, and

you can open the Settings dialog box page for the wizard and make permanent

changes to the default.

Table 2-2 on page 15 provides a brief description of each Settings dialog box

page and tells you where to find more information.

 NOTE: For information about any Settings dialog box page, click Help.

Table 2-2. Options in the Settings dialog box

Options on this page... Set this default behavior to determine...

General Which drives are tracked by the SmartLinks database,

and which files and folders are excluded from all

wizard or PowerClean lists.

Click Help in the General page of the Settings dialog

box for information about these options.

SpaceMaker How old files must be before they can be deleted, and

which kinds of files can be deleted.

PowerClean Whether backups are created for deleted files, how old

files must be before they can be deleted, and other

delete protection options.

BackTrack Whether BackTrack’s Installation Monitor runs as you

work, which kinds of installations it monitors, and

how long BackTrack archives are kept before they are

deleted.

Installing QuickClean

16 McAfee QuickClean

About McAfee Guardian

You use McAfee Guardian to schedule the QuickClean Lite wizard that keeps

your computer free of junk files and to set up Installation Monitor so that it

either does or does not run in the background as you work.

Ð TIP: If the Guardian icon does not appear in the taskbar, start Guardian

by clicking McAfee Guardian from the QuickClean menu in the

Windows Start menu Programs list.

McAfee Guardian is the program that all McAfee Software applications use to

manage scheduled and as-you-work events.

QuickClean How old files must be before they can be deleted, and

what kinds of files can be deleted.

Folders The default backup, Archive, BackTrack, and

Transport compressed file locations.

Click Help in the Folders page of the Settings dialog

box for information about these options.

Table 2-2. Options in the Settings dialog box (Continued)

Options on this page... Set this default behavior to determine...

User’s Guide 17

Installing QuickClean

To schedule an QuickClean event:

1. Right-click the Guardian icon in the clock area of the Windows taskbar,

and choose What’s Scheduled from the popup menu.

Figure 2-1. Scheduling events

The What’s Scheduled dialog box appears.

2. Select QuickClean or Installation Monitor from the list of scheduled

events in the Events window and click Schedule to open the Event

Schedule dialog box. The default scheduled events are:

• Qclean.exe

• Rebuild the Smartlinks Database

• Run Installation Monitor in the Background

3. Choose the time or interval when you want the event to run, or choose

Never to turn off an as-you-work or scheduled event.

Ð TIP: If you are running QuickClean, you can schedule events selecting

Settings on the Options menu on the main QuickClean screen and

choosing QuickClean. For more information about scheduling, click

Help.

Installing QuickClean

18 McAfee QuickClean

User’s Guide 19

3Freeing Disk Space

Windows applications and the Internet can clutter your hard disk with large

unused files that take up disk space. Set up and schedule the automatic

QuickClean wizard to clean up these files at specified intervals, or use the

SpaceMaker wizard to clean up more kinds of files.

Using QuickClean Lite

Keeping computer free of unnecessary files

Use the QuickClean Lite wizard to perform any of the following actions to

keep your computer free of unused files and invalid shortcuts:

• Remove unused files in the cache folder of your Internet browser.

• Remove any temporary files in folders that are used by applications and

Windows.

• Clean up shortcuts, Registry entries, and remove references in operating

system files that are not connected to any application.

• Empty the Recycle Bin.

When you click CleanUp in the QuickClean window, the QuickClean Lite

wizard appears. You select the kind of cleaner action you want it to perform

and then click Next to run the cleanup.

You can also schedule QuickClean Lite to run automatically, as described in

the following section.

To remove more files of different kinds and free a specific amount of disk

space, use the SpaceMaker wizard.

Setting up QuickClean Lite to run automatically

You can run QuickClean Lite whenever you need it, or you can set up

QuickClean to get rid of unnecessary files and junk on your computer at

regular intervals while you work.

Freeing Disk Space

20 McAfee QuickClean

To set up QuickClean Lite:

1. Click Settings on the Options menu in the main QuickClean window and

select the QuickClean Lite button.

Make sure that the QuickClean Lite options are set the way you want

them. The defaults in the QuickClean Lite page of the Options dialog box

specify what kind of files and settings can be removed. You can also click

Schedule to specify the schedule for running QuickClean Lite

automatically.

2. Click CleanUp in the main QuickClean window; then select QuickClean

Lite to run the wizard manually once to see the default settings in action.

Scheduling QuickClean Lite to run at a specific time

Events for McAfee applications are managed by the McAfee Guardian. Each

McAfee application adds to the list of events that the Guardian can run at a

scheduled time.

To change the QuickClean Lite schedule:

1. Right-click the red and white McAfee Guardian icon in the clock area of

the taskbar, and then select What’s Scheduled on the menu.

2. In the What’s Scheduled dialog box, select QuickClean Lite and click

Schedule.

3. In the Event Schedule dialog box, choose the time interval for

QuickClean Lite to run from the dropdown list box.

Using SpaceMaker

Freeing specific amount of disk space on a drive

If you need a specific amount of disk space on one of your drives, click

SpaceMaker in the QuickClean screen and tell the SpaceMaker wizard how

much space you want, what kind of files it can delete, and whether you want

it to make compressed backup copies of the files. Then let it free space for you.

Page is loading ...

McAfee QUICKCLEAN 1.0 User manual

McAfee QUICKCLEAN 1.0 User manual

McAfee QUICKCLEAN 1.0 User manual

Related papers

Other documents