Appliance Tower Configuration
Single Oven & 45cm Microwave
Brand: Miele
HD206062
IMPORTANT:
Dimensions for the shelf positions are to the centre of the stud fixing hole.
Re-positioning/drilling of new shelf stud positions may be required.
Shelf configurations are identical for standard height and tall options.
For tall options, a 180mm top box is fitted to the top of the tower
(upper door hinge position moves into the top box side panel)
Frontal height
437mm
Frontal height
437mm
Frontal height
622mm
Frontal height
437mm
Bottom back panel
(behind cupboard)
height 440mm
1510mm*
1042mm*
436mm
1042mm dimension
is to the top of the
bracket shelf
Rail reduction to 13mm
required
5mm
Bottom back panel
(behind cupboard)
height 440mm
Spike the holes for the runner
fixings using the dimensions
shown in the diagram.
105mm
27mm
347mm
Back support
panel
Note: Use metal brackets each
side (LAM0012), to support the
upper appliance
*Holes will need to be
drilled for upper shelf
and bracket positions
