ET2 E23257-20PC Installation guide

  • Hello! I am an AI chatbot trained to assist you with the ET2 E23257-20PC Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PRODUCT NAME: BANGLE
ITEM NUMBER: E23257-20PC
PRODUCTS ARE NOT INENDED
FOR COMMERCIAL USE
MADE IN CHINA
Page 1 of (3)
C o n t e m p o r a r y
L i g h t i n g
Bulbs (Included): 12 x 25 Watt G9
Caution: Xenon bulbs get very hot and
may burn you. Always make sure bulbs
are off for a minimum of 10 minutes
before handling. Fixture may be dimmed
using an electronic low voltage dimmer.
Please consult your electrician for hanging fixture and wiring.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (3)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
1.)
Remove mounting bracket (A) from
Canopy (C) to install to electrical box
2.)
Step.2:
Wire fixture to wires in outlet box. Green
wire is for Ground.
Step.1:
Step.3:
Screw finials (D) onto mounting bracket
(A) until canopy is flush with ceiling.
Step.4:
Hang Crystal According to Diagram on the
next page.
3.)
4.)
(D)
Fin al
(F)
G9 Bulb
(B)
Anchor Bolts
(C)
Canopy
(A)
Mounting Bracket
Model E23257-20PC
Crystal Diagram
C-24(L:4.9")
ECRY23257-SB3
B-8(L:3.6")
ECRY23257-SB2
A-40(L:2.7")
ECRY23257-SB1
D-8(L:5.5")
ECRY23257-SB4
F-1(L:7.32")
ECRY23257-SA4
E-4(L:6.55")
ECRY23257-SB5
A
B
C
D
E
F
Page 3 of (3)
/