Basalte eve Air Quick start guide

Type
Quick start guide
265
mm/10.43
163
mm/6.42”
Air
table
base
1
I
dentific
ation
of
the
p
arts
(product
number:
638-
xx,
639-
xx)
a. base
plate
b. aluminium tube (portrait version or landscape
version)
c. front
plate
d. 6 x Phillips M3x10 screws
(for mounting the table
base)
e. 4 x Phillips M6x8 screws
(for mounting the
Eve frame on
the
table
base)
2
Mounting the table
base
Mount the base plate on the tube using four Phillips
M3
screws
as shown
in
drawing 2.
3
Mount the front plate with
two
Phillips M3 screws, as shown
in
drawing 3. (always use the horizontal
holes)
4
Standard
USB cable
(not
included)
T
ak
e
the standard lightning
USB
cable, supplied with the
iPad
and
pull it
through the tube following the cable notch
as
shown
in
drawing 4.
D
imensions
P
ortrait
version:
265 mm/10.43” x 173 mm/6.81” x 173
mm/6.81”
Landscape
version:
163 mm/6.42” x 173 mm/6.81” x 173
mm/6.81”
173
mm/6.81”
173
mm/6.81”
5
Installing the
Eve Air frame
(not included
)
Scr
e
w
(with the four Phillips M6 screws) the Eve frame onto
the
front plate, taking
into
account the position of the frame (2).
Ensure the screws are positioned correctly, so they
cannot
damage the
iPad.
6
Mounting the
iPad
1. Plug the power connector
into
the
iPad.
Portrait version
Made
in Belgium
Landscape
version
2. Place the iPad sideways
in
the small
lip
according
t
o
the
drawing (6).
3. Gently push the iPad
in
the frame so
that it
is held
by
the magnets.
4. Mount the Eve cover
but
ensure
that
the cover is
not
squeezing the power
cable.
Basalte is a registered trademark of Basalte
bvba.
Eve
is a registered trademark of Basalte
bvba.
Eve, Eve Air, Eve mini and Eve
touch
are registered designs
of
Basalte
bvba.
iPad, iPad Air, iPad mini, iPad mini
Retina and iPod touch
are
registered trademarks of Apple
Inc.
Puck Power supply
(not included - product number:
610-01)
Inst
all
the puck
in
the wall box following the instructions of
the
puck manual. Connect the iPad
to
the puck, using the
Lightning
cable supplied with the
iPad.
7
Removing the
iPad
1. Remove the Eve
c
over
.
2. Place one finger behind the iPad and another one
on
the
iPad as shown
in
the drawing (7).
3. Gently
pull
the iPad
out
of the frame making sure
it
cannot
fall.
4. Remove the power c
onnector
.
Basalte
bvba
Hundelgemsesteenweg
1a
9820
Merelbeke
Belgium
tel
+32 9 385 78
38
fax +32 9 329 66
95
inf
o@b
asalt
e.be
www
.basalt
e.be
v1.0
©
2014
basalte
ACHTUNG: Die Basalte Eve Air Tablet Halterung ist nicht im Lieferumfang enthalten. Das Cover muss zusätzlich zum Standfuß bestellt werden!
1
a.
base
plate b. tube
c.
front
plate 2 3
fr
ont
front
landscape
version
b
ack
portrait
(638-
xx)
landscape
(639-
xx)
back
d.
6 x Phillips
screws
e.
4 x Phillips
screws
x
6
x
4
4 5
6
7
ACHTUNG: Die Basalte Eve Air Tablet Halterung ist nicht im Lieferumfang enthalten. Das Cover muss zusätzlich zum Standfuß bestellt werden!
  • Page 1 1
  • Page 2 2

Basalte eve Air Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages