KangerTech Subvod Kit User manual

Type
User manual
K
A
N
G
E
R
T
E
C
H
S
U
BV
O
D
I
N
S
T
R
UC
T
I
O
N
G
U
I
D
E
1_
Thanks For Buying Your Kangertech Suvod Mega TC from Us.
Following these steps will provide great satisfaction and longer use from your new E-
Cigarette. Keep this manual and refer back to it when needed as the manual in your kit
may be difficult to understand.
Step 1 – Getting started with the KangerTech SUBVOD Starter Kit
Getting started with the KangerTech SUBVOD Starter Kit is a piece of cake. Start
by unscrewing the tank from the battery housing. You will notice that at first
feeling, the entire unit is incredibly smooth in your hands and the connections are
incredibly seamless. Make sure when you are unscrewing the battery from the
battery unit, you are unscrewing the whole tank and not just the tank housing
from the base.
Step 2 – Unscrew the Base from the Atomizer and Soak the OCC Coil
After you have separated the entire KangerTech Subtank Mega TC Tank from the
battery housing, you will need to remove the base from the tank. This is a very
important step in the process; Priming or Soaking the Coil. One drop at a time on
both sides, soak your atomizer coil with 2-3 drops of e-juice in both cotton air-
holes or until the cotton air-holes will not take any more e-juice. Set the atomizer
base aside and let the atomizer coil sit for 10-20 minutes before first use (this is
only necessary for new and replacement OCC Vertical Coil Heads).
Step 3 – Filling the KangerTech Subvod Mega TC
After you have soaked your atomizer coil, you will need to fill your tank with e-
juice. Start by tilting your tank to the side as to not get any e-juice in the exposed
air hole. The open and exposed air hole is where you will inhale e-juice from. If
you fail to fill the KangerTech Subvod tank around the air hole and e-juice pours
into the air hole, you may get a gurgling tank, e-juice in your mouth or even worse
a clogged tank. If this happens, you will need to pull apart the tank and clean it.
NOTE: Do not over fill your Tank past the centre air tube or your Tank will leak
onto the battery!
Step 4 – Tilt your Tank Upside-Down and Screw the Base back on the
Tank
After you have carefully filled your KangerTech Subtank Mega TC with e-juice to
the preferred e-juice fill line, replace the atomizer base back onto the tank. In this
step, you want to keep your tank perfectly vertical as to not spill any e-juice when
screwing on the base and atomizer unit. After you have dropped your atomizer
and base unit back onto the tank, tightly screw on the base and wipe off any e-
juice residue.
Step 5 – Flip the Tank Right-Side Up and let E-Juice Soak into the Coil
Flip your KangerTech Subtank Mega TC right-side up and let remaining e-juice in
tank soak into the coil (this is only necessary for new and replacement OCC Coils).
Again, wipe away any addition e-juice leakage or residue.
Step 6 – Screw on Tank back onto the Battery Housing
Attach the entire KangerTech Subtank Mega TC unit back onto the battery
housing. Don’t get anxious and start firing your coil unless you have completely
soaked your coil for at least 10-20 minutes. Failing to let your e-juice soak into the
coil will result into a burnt taste and no vaper wants a burnt taste.
Step 7 – Turning on the KangerTech SUBVOD Battery
Turn on your battery by rapidly pressing the red button five (5) times fast and
turn off your battery by rapidly pressing the red button five (5) times. This is same
method of activating most vape pens. Similar to the classic eGo-T, eGo-Twist and
EVOD batteries.
Step 8 – Charging the KangerTech Subvod Battery with the Micro USB
Charger
Most new products now require a USB charging cord to charge the battery. You
can also grab a wall adapter unit for faster charging than by plugging the USB cord
into a computer USB hub. We recommend purchasing a second kit so that you can
always have a fully charged battery on hand.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

KangerTech Subvod Kit User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI