2. Miele
  3. TX0917
TX0917

Miele TX0917 User manual

  • Hello! I have analyzed the installation instructions for Miele ovens H 71xx and H 72xx. This document contains information about their installation dimensions, electrical connections, and ventilation requirements. I'm ready to answer your questions about these ovens.
  • What is the minimum fuse rating required for the oven?
    What is the required mains power supply for the oven?
    What is the minimum ventilation cut-out size?
    What type of appliance class is the oven?
11195481-07
Installation
*INSTALLATION*
Installation dimensions
Dimensions are given in mm.
Installation in a tall or base unit
When building the oven into a base unit underneath a hob, please also observe
the installation instructions for the hob as well as the building-in depth required
for the hob.
11195481-07
Installation
*INSTALLATION*
Side view
AH 71xx: 43mm
H 72xx: 47mm
11195481-07
Installation
*INSTALLATION*
Connections and ventilation
aFront view
bMains connection cable, length=2000mm
cNo connections permitted in this area
dVentilation cut-out, min. 150cm²
11195481-07
Installation
*INSTALLATION*
Installing the oven
Connect the oven to the electrical
supply.
Push the oven into the housing unit
and align it.
Open the door and use the screws
supplied to secure the oven to the
side walls of the housing unit.
11195481-07
Installation
*INSTALLATION*
Electrical connection
The oven is equipped with a mains
connection cable and plug for
connection to a 50Hz, 230V alternating
current supply.
The fuse rating must be at least 16A.
The appliance must only be connected
to a correctly installed earthed socket.
The electrical installation must comply
with VDE0100 requirements.
Ensure that the plug and switch are
accessible at all times.
If the appliance is hardwired or if the
switch is not accessible after
installation, an additional means of
disconnection means must be
provided.
Suitable means of disconnection
include accessible switches with an all-
pole contact gap of at least 3mm.
These include circuit breakers, fuses
and contactors (EN60335).
Connection data is given on the data
plate situated at the front of the oven
compartment. Please ensure the
connection data matches the
household supply.
When contacting Miele, please quote
the following:
- Model identifier
- Serial number
- Connection data (mains voltage/
frequency/maximum rated load)
If the mains connection cable is
damaged, a new one must be fitted by
a service technician authorised by the
Miele Customer Service Department.
This compact microwave combination
oven complies with European standard
EN55011. It is classified as a Group2,
classB appliance.
Group2 appliances use high frequency
energy in the form of electromagnetic
waves to create heat in food.
ClassB is assigned to appliances that
are suitable for domestic use.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronised with the mains power
supply (e.g. island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronised with
the mains power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the
current version of VDE-AR-E2510-2.
/