2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Molift
  7. RI43001

Molift RI43001 Operating instructions

  • I have reviewed the provided document, which are the recycling instructions for the Raiser Pro, model RI43001. This document outlines how to properly dispose of the device's various components, focusing on separating recyclable plastics and mixed metals. I'm ready to help with any questions you might have regarding these instructions.
  • What material are the wheels made of?
    How should bearings be recycled?
    What should I do with the foot plate?
Raiser Pro
EN - Recycling Instructions
Mixed metals
Plastic, Pur
Wheels, are made of recyclable plastics (e.g.
polypropylen and rubber) and can be removed
from the main plate and recycled seperately.
Bearings should be recycled as mixed metals.
Screws and steel rod inside the knee support
should be recycled with mixed metals.
The foot plate is made out of plastic and
should be recycled with knee support, turning
knobs and wheels.
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
RI43001 Rev A. 2022-09-30
/