KEY LOCK FLOOR SECURITY SAFE
MODEL NO: SKFS01
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! This safe is heavy and care should be exercised in transit and handling to ensure that no one is injured.
9 Formaximumsecurity,thissafemustbesecurelyxedwithinasoundoor.
8 DO NOTinstallinareaswherethereisexcessivedampandcondensationpresent.
8 DO NOTinstallinoorareasthatareconstantlywalkedonorwherethereisanywheeledtrace.g.trolleys,pallettrucks.
WARNING! Thewarnings,cautionsandinstructionsreferredtointhisinstructionmanualcannotcoverpossibleconditionsandsituations
thatmayoccur.Itmustbeunderstoodthatcommonsenseandcautionarefactorswhichcannotbebuiltintothisproduct,butmustbe
appliedbytheoperator.
2. i INTRODUCTION
Heavy-dutysteelconstructionwithtriplelockingbolts.Powdercoatedfinishtohelppreventcorrosion.Compactdesign,pre-drilledholes
andsecurityfixingsallowsafetobefixedintothefloorandbehiddenawaydiscreetly.Suppliedwithtwokeys.
3. i SPECIFICATION
Model No.: ................................................................SKFS01
External dims. (WxDxH): ......................... 260x400x140mm
Internal dims. (WxDxH): ............................225x315x90mm
4. INSTALLATION
4.1. Carefulconsiderationshouldbegiventothesightingofthefloorsafetoensurethatitisdiscreetlyplacedandnoteasilyfoundbyany
intruders.
4.2. Itisintendedthatthesafeflangeswillrestatfloorlevelwithcarpetoverlayingthesafe.
4.3. Eachsafeissuppliedwithfourheavydutyscrewsprimarilyintendedtofixintowoodenjoists.Wherethedistancebetweenjoist
centres(2”thick)isgreaterorlessthan16”(406mm)itwillbenecessarytocreateadditionalwoodworktobridgeorconstrictunsuitable
spaces.
4.4. If the safe is intended for a solid concrete floor, any recess created must be sound and fully dried out.
4.5. Removethedoorofthesafeasshowninfig.2.Unlockthesafebyturningthekeyclockwise(1).Usingtherecessedhandle(2),liftup
thelooseendofthedoorby20mm(3)andthenpullthedoorsideways(4)tounhookitfromtheotherendoftheopening.Liftthedoorup
andawayfromthesafe.
4.6. Lowerthesafeintothepreviouslypreparedapertureanddrill4mmpilotholesintothejoistsusingthepre-drilledholesinthe
ends of the safe as a guide.
4.7. Screwthefourheavydutyscrewsprovided,sidewaysintothejoistsasshowninfig.4.
SKFS01Issue3(H)04/11/22
Original Language Version
©JackSealeyLimited
Refer to
instruction
manual
fig.1fig.2fig.3